Product ITEM is unavailable. See products from the same category below.
Gas Regulators
Gas regulators attach to cylinders or pipelines and have a reducing valve that controls or regulates the pressure of gas used to operate instruments. Gases are supplied as compressed gas in high-pressure cylinders, low-pressure cryogenic cylinders, or pipeline installations. Gas regulators do not measure or control flow.
This heavy-duty brass two-stage oxygen regulator has a maximum inlet pressure of 3000 PSI. It has a 3-1/2 inch body diameter with a CGA 540 inlet and a "B" right-hand 9/16"-18 male outlet. This 2-1/2 PO gauge regulator is made for use with a cylinder supply and has a delivery pressure range of five to 125 PSI. It has a stainless steel diaphragm.
This heavy-duty brass two-stage oxygen regulator has a maximum inlet pressure of 3000 PSI. It has a 3-1/2 inch body diameter with a CGA 540 inlet and a "B" right-hand 9/16"-18 male outlet. This 2-1/2 PO gauge regulator is made for use with a cylinder supply and has a delivery pressure range of five to 125 PSI. It has a stainless steel diaphragm.
This brass single-stage oxygen regulator with gauge boots has a maximum inlet pressure of 3000 PSI. It has a 1-1/2 inch body diameter with a CGA 540 inlet and an "A" right-hand 3/8"-24 male outlet. This 1-1/2 PO gauge regulator is made for use with a cylinder supply and has a delivery pressure range of two to 60 PSI. It has a neoprene diaphragm.
This brass single-stage oxygen regulator with gauge boots has a maximum inlet pressure of 3000 PSI. It has a 1-1/2 inch body diameter with a CGA 540 inlet and an "A" right-hand 3/8"-24 male outlet. This 1-1/2 PO gauge regulator is made for use with a cylinder supply and has a delivery pressure range of two to 60 PSI. It has a neoprene diaphragm.
RUH82 medium-duty single stage regulator. Machined brass body. Polished chrome bonnet. Easy-to-read single scale 2 in gauges. 2 in tri-layered reinforced neoprene diaphragm. Heavy-duty mechanical stem type seat and nozzle assembly. Porous metal inlet filter (except CO2 models).
RUH82 medium-duty single stage regulator. Machined brass body. Polished chrome bonnet. Easy-to-read single scale 2 in gauges. 2 in tri-layered reinforced neoprene diaphragm. Heavy-duty mechanical stem type seat and nozzle assembly. Porous metal inlet filter (except CO2 models).
This brass single-stage acetylene regulator with gauge boots has a maximum inlet pressure of 500 PSI. It has a 1-1/2 inch body diameter with a CGA 200 inlet and an "A" left-hand 3/8"-24 male outlet. This 1-1/2 PO gauge regulator is made for use with a cylinder supply and has a delivery pressure range of two to 15 PSI. It has a neoprene diaphragm.
This brass single-stage acetylene regulator with gauge boots has a maximum inlet pressure of 500 PSI. It has a 1-1/2 inch body diameter with a CGA 200 inlet and an "A" left-hand 3/8"-24 male outlet. This 1-1/2 PO gauge regulator is made for use with a cylinder supply and has a delivery pressure range of two to 15 PSI. It has a neoprene diaphragm.
This R acetylene regulator is made of brass. It features 1 5/8 inches tri-layered reinforced diaphragm, easy to read, mechanical stem type seat, protective rubber gauge boots. It has an overall depth of 4½ inches, an overall width of 4.25 inches, and an overall height of four inches. It meets the standards for UL 592H.
This R acetylene regulator is made of brass. It features 1 5/8 inches tri-layered reinforced diaphragm, easy to read, mechanical stem type seat, protective rubber gauge boots. It has an overall depth of 4½ inches, an overall width of 4.25 inches, and an overall height of four inches. It meets the standards for UL 592H.
This RHP specialty gas regulator is made of brass. It features easy-to-read 2 inch gauges with steel case construction with polycarbonate lens, fine mesh filter screen between inlet and seat, piston actuated seat and more. In addition, it is designed for applications including high pressure. It meets the standards for UL listed.
This RHP specialty gas regulator is made of brass. It features easy-to-read 2 inch gauges with steel case construction with polycarbonate lens, fine mesh filter screen between inlet and seat, piston actuated seat and more. In addition, it is designed for applications including high pressure. It meets the standards for UL listed.
RV 80 heavy-duty single stage regulator. Forged brass body and bonnet. Easy-to-read single scale 2-1/2 in gauges. 3-1/4 in stainless steel diaphragm. Delrin bushing for smooth flow adjustment. Accessibility to the seat from the rear. Porous metal inlet filter (except CO2 models).
RV 80 heavy-duty single stage regulator. Forged brass body and bonnet. Easy-to-read single scale 2-1/2 in gauges. 3-1/4 in stainless steel diaphragm. Delrin bushing for smooth flow adjustment. Accessibility to the seat from the rear. Porous metal inlet filter (except CO2 models).
This brass single-stage combination regulator and flowmeter is designed for use with carbon dioxide and has a maximum inlet pressure of 3000 PSI. It has a 1-1/2 inch body diameter with a 320 inlet and a 5/8"-18 right-hand female outlet. This 1-1/2" gauge regulator is made for use with a cylinder supply and has a delivery pressure range of ten to 80 SCFH. It has a neoprene and brass-constructed diaphragm.
This brass single-stage combination regulator and flowmeter is designed for use with carbon dioxide and has a maximum inlet pressure of 3000 PSI. It has a 1-1/2 inch body diameter with a 320 inlet and a 5/8"-18 right-hand female outlet. This 1-1/2" gauge regulator is made for use with a cylinder supply and has a delivery pressure range of ten to 80 SCFH. It has a neoprene and brass-constructed diaphragm.
RUH82 medium-duty single stage regulator. Machined brass body. Polished chrome bonnet. Easy-to-read single scale 2 in gauges. 2 in tri-layered reinforced neoprene diaphragm. Heavy-duty mechanical stem type seat and nozzle assembly. Porous metal inlet filter (except CO2 models).
RUH82 medium-duty single stage regulator. Machined brass body. Polished chrome bonnet. Easy-to-read single scale 2 in gauges. 2 in tri-layered reinforced neoprene diaphragm. Heavy-duty mechanical stem type seat and nozzle assembly. Porous metal inlet filter (except CO2 models).
This RHP1500 regulator spec 1-stage nit CGA580 is made of steel. It features easy to read gauge with steel case construction with polycarbonate lens, piston actuated seat for durability, protective rubber gauge boots. In addition, it is designed for applications including high pressure.
This RHP1500 regulator spec 1-stage nit CGA580 is made of steel. It features easy to read gauge with steel case construction with polycarbonate lens, piston actuated seat for durability, protective rubber gauge boots. In addition, it is designed for applications including high pressure.
This RUH82 medium duty acetylene regulator is made of brass. It features two inch tri-layered reinforced diaphragm, delrin bushing for smooth flow adjustment, easy to read, fine mesh filter screen between inlet and seat, and more. It has an overall depth of 5½ inch, an overall width of seven inches, and an overall height of 5½ inches. It meets the standards for UL 592H.
This RUH82 medium duty acetylene regulator is made of brass. It features two inch tri-layered reinforced diaphragm, delrin bushing for smooth flow adjustment, easy to read, fine mesh filter screen between inlet and seat, and more. It has an overall depth of 5½ inch, an overall width of seven inches, and an overall height of 5½ inches. It meets the standards for UL 592H.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
