Product ITEM is unavailable. See products from the same category below.
Forets courts en carbure monobloc sans canal de refroidissement
Ces forets n’ont pas d’orifices pour le liquide de refroidissement. Si un liquide de refroidissement est nécessaire pour le perçage, il doit être acheminé de la machine à l’extrémité du foret à l’aide d’un tuyau séparé. Les forets en carbure offrent une excellente dureté, une résistance à l’usure et une résistance à la chaleur. Plus durs que les forets en acier rapide, en cobalt ou en métal fritté, ils nécessitent une installation rigide, telle qu’une machine à broche fixe. Les forets créent des trous précis à finition lisse et évitent souvent l’alésage du trou après le perçage. Les forets courts offrent un bon équilibre entre résistance et précision lors du perçage dans une variété de matériaux.
Ce foret a une tige de 11/64 po de diamètre. Il est sans canal de refroidissement, mesure 3 1/4 po de long, a des cannelures droites de 2 9/64 po, avec un sens de coupe à droite.
Ce foret a une tige de 11/64 po de diamètre. Il est sans canal de refroidissement, mesure 3 1/4 po de long, a des cannelures droites de 2 9/64 po, avec un sens de coupe à droite.
Ce foret a un diamètre de 13/64 po/une tige de 1 5/27 po de long. Il est sans canal de refroidissement et a une longueur de 3 5/8 po. De plus, il a des cannelures droites de 2 à 11/25 po, une tige à 3 plats, un sens de coupe à droite.
Ce foret a un diamètre de 13/64 po/une tige de 1 5/27 po de long. Il est sans canal de refroidissement et a une longueur de 3 5/8 po. De plus, il a des cannelures droites de 2 à 11/25 po, une tige à 3 plats, un sens de coupe à droite.
Ce foret court est en cobalt et possède une tige de 7/32 po de diamètre. Peut être utilisé avec l'acier allié, l'aluminium, la fonte, l'acier à haute teneur en carbone, le métal léger, l'acier inoxydable et le titane. Il est sans canal de refroidissement et a une longueur de 3 3/4 po. De plus, il a des cannelures droites de 2 17/32 po, un sens de coupe à droite et un angle de pointe de 135°.
Ce foret court est en cobalt et possède une tige de 7/32 po de diamètre. Peut être utilisé avec l'acier allié, l'aluminium, la fonte, l'acier à haute teneur en carbone, le métal léger, l'acier inoxydable et le titane. Il est sans canal de refroidissement et a une longueur de 3 3/4 po. De plus, il a des cannelures droites de 2 17/32 po, un sens de coupe à droite et un angle de pointe de 135°.
Ce foret a une tige de 9/64 po de diamètre. Il est sans canal de refroidissement, mesure 2 7/8 po de long, a des cannelures droites de 1 47/64 po, avec un sens de coupe à droite.
Ce foret a une tige de 9/64 po de diamètre. Il est sans canal de refroidissement, mesure 2 7/8 po de long, a des cannelures droites de 1 47/64 po, avec un sens de coupe à droite.
Ce foret a une tige de 3/32 po de diamètre. Il est sans canal de refroidissement, mesure 2 1/4 po de long, a des cannelures droites de 1 17/64 po, un sens de coupe à droite et un angle de pointe de 118°.
Ce foret a une tige de 3/32 po de diamètre. Il est sans canal de refroidissement, mesure 2 1/4 po de long, a des cannelures droites de 1 17/64 po, un sens de coupe à droite et un angle de pointe de 118°.
This jobber length drill bit is made of cobalt and has a 5/32 inch diameter, 1⅛ inch long shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 3⅛ inch length. Plus it has 2 inch straight flutes, right hand cutting direction, and a 135 Degrees split point.
This jobber length drill bit is made of cobalt and has a 5/32 inch diameter, 1⅛ inch long shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 3⅛ inch length. Plus it has 2 inch straight flutes, right hand cutting direction, and a 135 Degrees split point.
This drill bit has a 17/64 inch diameter, 1¼ inch long shank. It is non-coolant through with a 4⅛ inch length. Plus it has 2⅞ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This drill bit has a 17/64 inch diameter, 1¼ inch long shank. It is non-coolant through with a 4⅛ inch length. Plus it has 2⅞ inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This jobber length drill bit is made of cobalt and has a ⅜ inch diameter shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a five-inch length. Plus it has 3 59/95 inch straight flutes, right hand cutting direction, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a ⅜ inch diameter shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a five-inch length. Plus it has 3 59/95 inch straight flutes, right hand cutting direction, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 7/64 inch diameter, 1 11/86 inch long shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 2⅝ inch length. Plus it has 1½ inch straight flutes, a right hand cutting direction, and a 118 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 7/64 inch diameter, 1 11/86 inch long shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 2⅝ inch length. Plus it has 1½ inch straight flutes, a right hand cutting direction, and a 118 Degrees split point drill point.
This drill bit has a 15/64 inch diameter shank. It is non-coolant through with a 3⅞ inch length. Plus it has 2 7/11 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This drill bit has a 15/64 inch diameter shank. It is non-coolant through with a 3⅞ inch length. Plus it has 2 7/11 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This jobber length drill bit is made of cobalt and has a 9/32 inch diameter shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 4¼ inch length. Plus it has 2 20/21 inch straight flutes, right hand cutting direction, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 9/32 inch diameter shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 4¼ inch length. Plus it has 2 20/21 inch straight flutes, right hand cutting direction, and a 135 Degrees split point drill point.
This drill bit has a 19/64 inch diameter, 1 18/59 inch long shank. It is non-coolant through with a 4⅜ inch length. Plus it has 3¾3 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This drill bit has a 19/64 inch diameter, 1 18/59 inch long shank. It is non-coolant through with a 4⅜ inch length. Plus it has 3¾3 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This drill bit has a 25/64 inch diameter, 1 61/68 inch long shank. It is non-coolant through with a 5⅛ inch length. Plus it has 3 13/57 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This drill bit has a 25/64 inch diameter, 1 61/68 inch long shank. It is non-coolant through with a 5⅛ inch length. Plus it has 3 13/57 inch straight flutes, 3 flats shank, a right hand cutting direction, and a 135 Degrees drill point.
This jobber length drill bit is made of cobalt and has a 3/16 inch diameter shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 3½ inch length. Plus it has 2 21/64 inch straight flutes, right hand cutting direction, and a 135 Degrees split point drill point.
This jobber length drill bit is made of cobalt and has a 3/16 inch diameter shank. It is designed for use with alloy steel, aluminum, cast iron, high carbon steel, light gauge metal, stainless steel, titanium. It is non-coolant through with a 3½ inch length. Plus it has 2 21/64 inch straight flutes, right hand cutting direction, and a 135 Degrees split point drill point.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
