Machining
Drilling & Holemaking
Drill Bits
Drill Bits for Metal & Plastic
Jobber-Length Drill Bits
Solid Carbide Jobber-Length Drill Bits
Coolant-Through Solid Carbide Jobber-Length Drill Bits
Close

Filter Results By

Applied Filters

Clear All

Brand
WIDIA

Search within these results

Brand

APPROVED VENDOR APPROVED VENDOR (31)
OSG OSG (2)
WIDIA WIDIA (417)

Price

$100 - $200 $100 - $200 (188)
$200 - $300 $200 - $300 (81)
$300 - $400 $300 - $400 (50)
$400 - $500 $400 - $500 (6)
$500 - $600 $500 - $600 (21)
$600 - $700 $600 - $700 (14)
$700 - $800 (11)

$800 - $900 (9)

$900 - $1000 (5)

$1000 - $1500 (21)

$1500 - $2000 (11)
View more View less

Measurement System

Fractional Inch Fractional Inch (57)
Letter Letter (8)
Metric Metric (305)
Wire Wire (47)

Drill Bit Size

#2 #2 (2)
#3 #3 (3)
#7 #7 (1)
#11 #11 (2)
#12 #12 (3)
#13 #13 (2)
#14 (3)

#19 (3)

#20 (2)

#21 (1)

#26 (3)

#27 (2)

#30 (3)

#31 (2)

#32 (2)

#33 (2)

#34 (2)

#36 (1)

#37 (2)

#38 (2)

#40 (2)

#41 (2)

5/64 in (2)

7/64 in (2)

1/8 in (1)

9/64 in (2)

5/32 in (1)

11/64 in (2)

3/16 in (1)

13/64 in (2)

15/64 in (2)

17/64 in (2)

19/64 in (2)

21/64 in (2)

23/64 in (2)

25/64 in (2)

7/16 in (1)

29/64 in (2)

15/32 in (1)

31/64 in (3)

1/2 in (1)

33/64 in (2)

35/64 in (2)

37/64 in (2)

19/32 in (2)

39/64 in (2)

5/8 in (1)

41/64 in (2)

21/32 in (4)

11/16 in (2)

45/64 in (1)

23/32 in (1)

47/64 in (1)

3/4 in (2)

1.50 mm (2)

1.60 mm (2)

1.70 mm (2)

1.80 mm (2)

1.90 mm (2)

2.00 mm (2)

2.10 mm (2)

2.20 mm (2)

2.30 mm (2)

2.40 mm (2)

2.50 mm (2)

2.60 mm (2)

2.70 mm (2)

2.80 mm (2)

2.90 mm (2)

3.00 mm (4)

3.05 mm (3)

3.10 mm (2)

3.18 mm (1)

3.20 mm (3)

3.26 mm (3)

3.30 mm (2)

3.40 mm (2)

3.46 mm (2)

3.50 mm (2)

3.60 mm (2)

3.66 mm (3)

3.70 mm (2)

3.73 mm (2)

3.80 mm (3)

3.90 mm (2)

4.00 mm (3)

4.04 mm (1)

4.09 mm (2)

4.10 mm (2)

4.20 mm (2)

4.22 mm (2)

4.30 mm (2)

4.40 mm (2)

4.50 mm (2)

4.60 mm (1)

4.62 mm (1)

4.85 mm (1)

4.90 mm (2)

5.00 mm (2)

5.10 mm (2)

5.11 mm (2)

5.16 mm (1)

5.20 mm (1)

5.30 mm (1)

5.40 mm (1)

5.41 mm (2)

5.50 mm (1)

5.56 mm (1)

5.60 mm (2)

5.62 mm (2)

5.70 mm (2)

5.80 mm (2)

5.90 mm (2)

5.95 mm (1)

6.00 mm (3)

6.10 mm (2)

6.20 mm (1)

6.30 mm (2)

6.40 mm (2)

6.50 mm (2)

6.60 mm (2)

6.70 mm (2)

6.75 mm (1)

6.80 mm (3)

6.90 mm (1)

7.00 mm (2)

7.10 mm (2)

7.20 mm (2)

7.30 mm (2)

7.40 mm (2)

7.50 mm (2)

7.60 mm (2)

7.70 mm (2)

7.80 mm (2)

7.90 mm (2)

8.00 mm (3)

8.10 mm (2)

8.20 mm (2)

8.30 mm (2)

8.40 mm (2)

8.50 mm (4)

8.60 mm (2)

8.70 mm (2)

8.73 mm (1)

8.80 mm (2)

8.90 mm (2)

9.00 mm (2)

9.10 mm (2)

9.20 mm (2)

9.30 mm (2)

9.35 mm (1)

9.40 mm (2)

9.50 mm (2)

9.60 mm (1)

9.70 mm (2)

9.80 mm (2)

9.90 mm (2)

10.00 mm (3)

10.20 mm (3)

10.32 mm (1)

10.50 mm (4)

10.72 mm (1)

10.80 mm (2)

11.00 mm (4)

11.40 mm (1)

11.50 mm (3)

11.91 mm (1)

12.00 mm (6)

12.30 mm (1)

12.50 mm (4)

13.00 mm (5)

13.10 mm (1)

13.50 mm (2)

13.89 mm (1)

14.00 mm (2)

14.29 mm (1)

14.40 mm (1)

14.50 mm (4)

14.68 mm (2)

15.00 mm (3)

15.08 mm (2)

15.48 mm (3)

15.50 mm (3)

15.88 mm (1)

16.00 mm (3)

16.27 mm (2)

16.40 mm (1)

16.50 mm (2)

16.67 mm (1)

17.00 mm (2)

17.46 mm (1)

17.50 mm (3)

17.86 mm (1)

18.00 mm (2)

18.26 mm (4)

18.50 mm (4)

18.65 mm (4)

19.00 mm (2)

19.50 mm (3)

20.00 mm (4)

F (1)

G (2)

Q (2)

U (3)
View more View less

Decimal Equivalent

0.0591 0.0591 (2)
0.063 0.063 (2)
0.0669 0.0669 (2)
0.0709 0.0709 (2)
0.0748 0.0748 (2)
0.0781 0.0781 (2)
0.0787 (2)

0.0827 (2)

0.0866 (2)

0.0906 (2)

0.0945 (2)

0.096 (2)

0.098 (2)

0.0984 (2)

0.1015 (2)

0.1024 (2)

0.104 (2)

0.1063 (2)

0.1065 (1)

0.1094 (2)

0.1102 (2)

0.111 (2)

0.113 (2)

0.1142 (2)

0.116 (2)

0.1181 (4)

0.12 (2)

0.122 (2)

0.125 (1)

0.126 (3)

0.1285 (3)

0.1299 (2)

0.1339 (2)

0.1378 (2)

0.1406 (2)

0.1417 (2)

0.144 (2)

0.1457 (2)

0.147 (3)

0.1496 (3)

0.1535 (2)

0.1563 (1)

0.1575 (3)

0.159 (1)

0.161 (2)

0.1614 (2)

0.1654 (2)

0.166 (3)

0.1693 (2)

0.1719 (2)

0.1732 (2)

0.1772 (2)

0.1811 (1)

0.182 (3)

0.185 (2)

0.1875 (1)

0.189 (3)

0.191 (2)

0.1929 (2)

0.1969 (2)

0.2008 (2)

0.201 (1)

0.2031 (2)

0.2047 (1)

0.2087 (1)

0.2126 (1)

0.213 (2)

0.2165 (2)

0.2205 (2)

0.221 (2)

0.2244 (2)

0.2283 (2)

0.2323 (2)

0.2344 (2)

0.2362 (3)

0.2402 (2)

0.2441 (1)

0.248 (2)

0.252 (2)

0.2559 (2)

0.257 (1)

0.2598 (2)

0.261 (2)

0.2638 (2)

0.2656 (2)

0.2677 (3)

0.2717 (1)

0.2756 (2)

0.2795 (2)

0.2835 (2)

0.2874 (2)

0.2913 (2)

0.2953 (2)

0.2969 (2)

0.2992 (2)

0.3031 (2)

0.3071 (2)

0.311 (2)

0.315 (3)

0.3189 (2)

0.3228 (2)

0.3268 (2)

0.3281 (2)

0.3307 (2)

0.332 (2)

0.3346 (4)

0.3386 (2)

0.3425 (2)

0.3465 (2)

0.3504 (2)

0.3543 (2)

0.3583 (2)

0.3594 (2)

0.3622 (2)

0.3661 (2)

0.368 (3)

0.3701 (2)

0.374 (2)

0.378 (1)

0.3819 (2)

0.3858 (2)

0.3898 (2)

0.3906 (2)

0.3937 (3)

0.4016 (3)

0.4134 (4)

0.4252 (2)

0.4331 (4)

0.4375 (1)

0.4488 (1)

0.4528 (3)

0.4531 (2)

0.4688 (1)

0.4724 (6)

0.4844 (3)

0.4921 (4)

0.5 (1)

0.5118 (5)

0.5156 (2)

0.5315 (2)

0.5469 (2)

0.5512 (2)

0.5669 (1)

0.5709 (4)

0.5781 (2)

0.5906 (3)

0.5938 (2)

0.6094 (2)

0.6102 (2)

0.625 (1)

0.6299 (3)

0.6406 (2)

0.6457 (1)

0.6496 (2)

0.6563 (4)

0.6693 (2)

0.6875 (2)

0.689 (3)

0.7031 (1)

0.7087 (2)

0.7188 (1)

0.7283 (2)

0.7344 (1)

0.748 (2)

0.75 (2)

0.7677 (2)

0.7874 (3)

0.1200 in (4)

0.1250 in (1)

0.1285 in (3)

0.1360 in (2)

0.1440 in (3)

0.1470 in (1)

0.1590 in (1)

0.1610 in (2)

0.1660 in (2)

0.1820 in (1)

0.1910 in (1)

0.2010 in (2)

0.2031 in (1)

0.2130 in (2)

0.2188 in (1)

0.2210 in (1)

0.2211 in (1)

0.2344 in (1)

0.2656 in (1)

0.3438 in (1)

0.3680 in (1)

0.4063 in (1)

0.4219 in (1)

0.4688 in (1)

0.4844 in (1)

0.4961 in (1)

0.5469 in (1)

0.5625 in (1)

0.5781 in (2)

0.5938 in (2)

0.6094 in (3)

0.6102 in (1)

0.6250 in (1)

0.6406 in (2)

0.6563 in (1)

0.6875 in (1)

0.7031 in (1)

0.7188 in (4)

0.7283 in (2)

0.7344 in (4)

0.7677 in (1)

0.7874 in (1)
View more View less

Finish - Machining

AlCrN AlCrN (64)
TiAlN TiAlN (353)

Drill Bit Point Angle

132 Degrees 132 Degrees (1)
140 Degrees 140 Degrees (416)

Drill Bit Point Type

Conical Point Conical Point (309)
TDS Point TDS Point (108)

Flute Type

Helical Helical (370)
Spiral Spiral (47)

Maximum Drilling Depth

57/64 in 57/64 in (2)
29/32 in 29/32 in (1)
1 1/8 in 1 1/8 in (3)
1 9/64 in 1 9/64 in (1)
1 19/64 in 1 19/64 in (4)
1 3/8 in 1 3/8 in (7)
1 39/64 in (5)

1 11/16 in (3)

1 7/8 in (5)

1 59/64 in (2)

2 13/64 in (2)

2 15/64 in (1)

2 23/64 in (3)

2 25/64 in (1)

2 15/32 in (3)

2 43/64 in (2)

2 25/32 in (2)

2 51/64 in (3)

3 1/64 in (2)

3 7/64 in (1)

3 37/64 in (1)

3 31/32 in (4)

4 7/16 in (4)

4 7/8 in (1)

9 mm (5)

14 mm (5)

15 mm (5)

17 mm (14)

22 mm (5)

23 mm (15)

23.00 mm (7)

25 mm (15)

29 mm (13)

29.00 mm (2)

33 mm (11)

33.00 mm (7)

35 mm (12)

35.00 mm (3)

41 mm (10)

41.00 mm (4)

43 mm (21)

43.00 mm (1)

48 mm (13)

48.00 mm (7)

49 mm (25)

49.00 mm (1)

56 mm (15)

56.00 mm (2)

57 mm (11)

60 mm (10)

61 mm (10)

63 mm (11)

63.00 mm (1)

68 mm (24)

68.00 mm (1)

71 mm (8)

77 mm (7)

77.00 mm (1)

79 mm (10)

91 mm (6)

91.00 mm (3)

101 mm (6)

101.00 mm (5)

113 mm (5)

113.00 mm (2)

124 mm (5)

124.00 mm (8)

160 mm (1)

165 mm (1)
View more View less

Flute Length

1 1/16 in 1 1/16 in (3)
1 3/8 in 1 3/8 in (4)
1 9/16 in 1 9/16 in (4)
1 11/16 in 1 11/16 in (7)
1 7/8 in 1 7/8 in (5)
2 1/16 in 2 1/16 in (3)
2 3/16 in (5)

2 3/8 in (2)

2 5/8 in (1)

2 3/4 in (2)

2 13/16 in (1)

3 in (3)

3 1/8 in (2)

3 1/4 in (3)

3 5/8 in (5)

3 11/16 in (1)

3 15/16 in (2)

4 1/4 in (1)

4 3/4 in (4)

5 1/4 in (3)

5 5/16 in (1)

5 13/16 in (1)

12.00 mm (5)

18.00 mm (10)

22.00 mm (14)

26.00 mm (5)

28.00 mm (22)

30.00 mm (15)

36.00 mm (15)

40 mm (1)

40.00 mm (17)

44.00 mm (15)

49.00 mm (14)

53.00 mm (22)

56.00 mm (20)

61.00 mm (26)

67.00 mm (11)

71 mm (1)

71.00 mm (16)

72.00 mm (10)

77.00 mm (10)

80.00 mm (25)

83 mm (4)

83.00 mm (8)

93 mm (3)

93.00 mm (5)

94.00 mm (10)

101 mm (2)

101.00 mm (6)

108.00 mm (9)

121.00 mm (11)

135.00 mm (7)

148.00 mm (13)

181 mm (1)

193.00 mm (1)
View more View less

Shank Dia.

15/64 in 15/64 in (28)
5/16 in 5/16 in (5)
25/64 in 25/64 in (4)
15/32 in 15/32 in (3)
35/64 in 35/64 in (4)
5/8 in 5/8 in (7)
45/64 in (9)

25/32 in (3)

4 mm (49)

6 mm (74)

6.00 mm (30)

8 mm (42)

8.00 mm (1)

10 mm (49)

10.00 mm (2)

12 mm (25)

12.00 mm (2)

14 mm (17)

14.00 mm (3)

16 mm (17)

16.00 mm (6)

18 mm (13)

18.00 mm (2)

20 mm (13)

20.00 mm (9)
View more View less

Overall Length

2 19/32 in 2 19/32 in (3)
2 29/32 in 2 29/32 in (4)
3 1/16 in 3 1/16 in (4)
3 7/32 in 3 7/32 in (7)
3 13/32 in 3 13/32 in (5)
3 9/16 in 3 9/16 in (3)
3 11/16 in (5)

4 1/32 in (2)

4 1/8 in (1)

4 5/16 in (1)

4 5/8 in (2)

4 25/32 in (2)

4 7/8 in (3)

5 7/32 in (3)

5 17/32 in (1)

5 5/8 in (5)

6 in (2)

6 3/32 in (1)

6 23/32 in (4)

7 1/4 in (3)

7 9/32 in (1)

7 27/32 in (1)

58.00 mm (29)

66.00 mm (42)

74.00 mm (15)

78.00 mm (18)

82.00 mm (15)

87.00 mm (14)

91.00 mm (22)

94.00 mm (20)

103.00 mm (26)

105.00 mm (11)

110.00 mm (10)

118 mm (1)

118.00 mm (16)

122.00 mm (25)

124.00 mm (10)

133 mm (4)

133.00 mm (8)

141.00 mm (10)

143 mm (3)

143.00 mm (5)

153 mm (2)

153.00 mm (6)

155.00 mm (9)

171.00 mm (11)

185.00 mm (7)

200.00 mm (13)

234 mm (1)

246.00 mm (1)
View more View less

Primary Material Application

Aluminum, Cast Iron, Nickel, Stainless Steel, Steel, Titanium Aluminum, Cast Iron, Nickel, Stainless Steel, Steel, Titanium (304)
Cast Iron Cast Iron (64)
Cast Iron, High-Temp Alloys, Non-Ferrous Materials, Stainless Steel, Steel Cast Iron, High-Temp Alloys, Non-Ferrous Materials, Stainless Steel, Steel (1)
Cast Iron, Stainless Steel, Steel Cast Iron, Stainless Steel, Steel (1)
Stainless Steel, Steel Stainless Steel, Steel (20)
Steel Steel (27)

Standards

ANSI, DIN 6535, DIN 6537, ISO ANSI, DIN 6535, DIN 6537, ISO (185)
ANSI, DIN 6535, ISO ANSI, DIN 6535, ISO (166)
DIN 6535 DIN 6535 (1)
DIN 6535, DIN 6537, ISO DIN 6535, DIN 6537, ISO (18)
DIN 6535, DIN6537 DIN 6535, DIN6537 (10)
DIN 6535, ISO DIN 6535, ISO (37)

Coolant-Through Solid Carbide Jobber-Length Drill Bits

These solid carbide jobber-length drill bits have holes that carry coolant from the drilling machine down to their tip. The coolant lubricates and cools down the drill bit to improve drilling precision and prevent wear to its cutting edges. Carbide drill bits provide excellent hardness, wear resistance, and heat resistance. They are harder than high-speed steel, cobalt, or powdered-metal drill bits and require a rigid setup such as a fixed-spindle machine. The bits create precise holes with a smooth finish and often eliminate the need for reaming the hole after drilling. Jobber-length drill bits provide a good balance of strength and accuracy when drilling into a variety of materials.

https://catalogue.grainger.ca/?hybris=true

417 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

JOBBER LENGTH DRILL BIT, 11MM DRILL BIT SIZE, 118MM OVERALL L, CARBIDE, ALCRN FINISH

WIDIA
JOBBER LENGTH DRILL BIT, 11MM DRILL BIT SIZE, 118MM OVERALL L, CARBIDE, ALCRN FINISH
Item # WIDTDS412A11000
Mfr. Model # TDS412A11000

EHC: EHC :

This WK15PD jobber length drill bit is made of carbide and has a 12 mm diameter, 45mm long shank. It is designed for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS412 series jobber length drill bit has an AlCrN finish, and has metric measurements. It is coolant through with a 118mm length. Plus it has two 71mm spiral flutes, a straight shank, and 140 Degrees conical point.

This WK15PD jobber length drill bit is made of carbide and has a 12 mm diameter, 45mm long shank. It is designed for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS412 series jobber length drill bit has an AlCrN finish, and has metric measurements. It is coolant through with a 118mm length. Plus it has two 71mm spiral flutes, a straight shank, and 140 Degrees conical point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $350.48 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 20 MM OVERALL L, CARBIDE, SIZE 19

WIDIA
JOBBER LENGTH DRILL BIT, 20 MM OVERALL L, CARBIDE, SIZE 19
Item # WIDTDS413A19500
Mfr. Model # TDS413A19500

EHC: EHC :

This WK15PD jobber length drill bit is made of carbide and has a 20mm diameter, 50mm long shank. It is for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS413 series jobber length drill bit has an AlCrN finish, and has metric measurements. It is coolant through with a 200mm length. Plus it has two 148mm helical flutes, a straight shank, and 140 Degrees TDS point drill point.

This WK15PD jobber length drill bit is made of carbide and has a 20mm diameter, 50mm long shank. It is for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS413 series jobber length drill bit has an AlCrN finish, and has metric measurements. It is coolant through with a 200mm length. Plus it has two 148mm helical flutes, a straight shank, and 140 Degrees TDS point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $1,962.93 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 20 MM OVERALL L, SIZE 18

WIDIA
JOBBER LENGTH DRILL BIT, 20 MM OVERALL L, SIZE 18
Item # WIDTDS413A18500
Mfr. Model # TDS413A18500

EHC: EHC :

This WK15PD drill bit is made of carbide and has a 20mm diameter, 50mm long shank. It is designed for use with cast iron, and meets the standards for DIN 6535 and ISO. This TDS413A series jobber length drill bit has an AlCrN finish, and has metric measurements. It is coolant through with a 200mm length. Plus it has two 148mm helical flutes, a straight shank, and 140 Degrees TDS point drill point.

This WK15PD drill bit is made of carbide and has a 20mm diameter, 50mm long shank. It is designed for use with cast iron, and meets the standards for DIN 6535 and ISO. This TDS413A series jobber length drill bit has an AlCrN finish, and has metric measurements. It is coolant through with a 200mm length. Plus it has two 148mm helical flutes, a straight shank, and 140 Degrees TDS point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $1,822.26 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, ⅝ IN DRILL BIT SIZE, 6 23/32 IN L, CARBIDE, ALCRN FINISH

WIDIA
JOBBER LENGTH DRILL BIT, ⅝ IN DRILL BIT SIZE, 6 23/32 IN L, CARBIDE, ALCRN FINISH
Item # WIDTDS413A15875
Mfr. Model # TDS413A15875

EHC: EHC :

This WK15PD jobber length drill bit is made of carbide and has a ⅝ inch diameter, 1⅞ inch long shank. It is for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS413 series jobber length drill bit has an AlCrN finish, and has fractional inch measurements. It is coolant through with a 6 23/32 inch length. Plus it has two 4¾ inch spiral flutes, a straight shank, and 140 Degrees TDS point drill point.

This WK15PD jobber length drill bit is made of carbide and has a ⅝ inch diameter, 1⅞ inch long shank. It is for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS413 series jobber length drill bit has an AlCrN finish, and has fractional inch measurements. It is coolant through with a 6 23/32 inch length. Plus it has two 4¾ inch spiral flutes, a straight shank, and 140 Degrees TDS point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $1,186.01 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 47/64 IN DRILL BIT SIZE, 6 IN L

WIDIA
JOBBER LENGTH DRILL BIT, 47/64 IN DRILL BIT SIZE, 6 IN L
Item # WIDTDS402A18654
Mfr. Model # TDS402A18654

EHC: EHC :

This WP20PD jobber length drill bit is made of carbide and has a 0.7874 inch diameter, 50mm long shank. It is for use with steel, and meets the standards for DIN and ISO. This TDS402 series jobber length drill bit has a TiAlN finish, and has fractional inch measurements. It is coolant through with a 6.0236 inch length. Plus it has two 3.9764 inch helical flutes, a straight shank, and 140 Degrees TDS point drill point.

This WP20PD jobber length drill bit is made of carbide and has a 0.7874 inch diameter, 50mm long shank. It is for use with steel, and meets the standards for DIN and ISO. This TDS402 series jobber length drill bit has a TiAlN finish, and has fractional inch measurements. It is coolant through with a 6.0236 inch length. Plus it has two 3.9764 inch helical flutes, a straight shank, and 140 Degrees TDS point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $1,138.37 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, #31 DRILL BIT SIZE, 3-1/16 IN L, CARBIDE, TIALN FINISH

WIDIA
JOBBER LENGTH DRILL BIT, #31 DRILL BIT SIZE, 3-1/16 IN L, CARBIDE, TIALN FINISH
Item # WIDTDS403A03048
Mfr. Model # TDS403A03048

EHC: EHC :

This WP20PD drill bit is made of carbide and has a 6mm diameter, 1.4173 inch long shank. It is for use with steel, and meets the standards for DIN 6535 and ISO. This TDS403A series jobber length drill bit has a TiAlN finish, and has metric measurements. It is coolant through with a 3.0709 inch length. Plus it has two 1.5748 inch helical flutes, a straight shank, and 140 Degrees TDS point drill point.

This WP20PD drill bit is made of carbide and has a 6mm diameter, 1.4173 inch long shank. It is for use with steel, and meets the standards for DIN 6535 and ISO. This TDS403A series jobber length drill bit has a TiAlN finish, and has metric measurements. It is coolant through with a 3.0709 inch length. Plus it has two 1.5748 inch helical flutes, a straight shank, and 140 Degrees TDS point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $306.27 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 31/64 IN DRILL BIT SIZE, 6 3/32 IN LENGTH, CARBIDE

WIDIA
JOBBER LENGTH DRILL BIT, 31/64 IN DRILL BIT SIZE, 6 3/32 IN LENGTH, CARBIDE
Item # WIDTDS403A12304
Mfr. Model # TDS403A12304

EHC: EHC :

This WP20PD drill bit is made of carbide and has a 14mm diameter, 1¾ inch long shank. It is for use with steel, and meets the standards for DIN 6535 and ISO. This TDS403A series jobber length drill bit has a TiAlN finish, and has metric measurements. It is coolant through with a 6 3/32 inch length. Plus it has two 4¼ inch spiral flutes, a straight shank, and 140 Degrees TDS point drill point.

This WP20PD drill bit is made of carbide and has a 14mm diameter, 1¾ inch long shank. It is for use with steel, and meets the standards for DIN 6535 and ISO. This TDS403A series jobber length drill bit has a TiAlN finish, and has metric measurements. It is coolant through with a 6 3/32 inch length. Plus it has two 4¼ inch spiral flutes, a straight shank, and 140 Degrees TDS point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $889.50 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 39/64 IN DRILL BIT SIZE, 5 7/32 IN L

WIDIA
JOBBER LENGTH DRILL BIT, 39/64 IN DRILL BIT SIZE, 5 7/32 IN L
Item # WIDTDS412A15479
Mfr. Model # TDS412A15479

EHC: EHC :

This WK15PD jobber length drill bit is made of carbide and has a 16 mm diameter, 1⅞ inch long shank. It is for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS412A series jobber length drill bit has an AlCrN finish, and has metric measurements. It is coolant through with a 5 7/32 inch length. Plus it has two 3¼ inch spiral flutes, a straight shank, and 140 Degrees TDS point drill point.

This WK15PD jobber length drill bit is made of carbide and has a 16 mm diameter, 1⅞ inch long shank. It is for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS412A series jobber length drill bit has an AlCrN finish, and has metric measurements. It is coolant through with a 5 7/32 inch length. Plus it has two 3¼ inch spiral flutes, a straight shank, and 140 Degrees TDS point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $749.90 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 41/64 IN DRILL BIT SIZE, 5⅝ IN LENGTH, CARBIDE

WIDIA
JOBBER LENGTH DRILL BIT, 41/64 IN DRILL BIT SIZE, 5⅝ IN LENGTH, CARBIDE
Item # WIDTDS412A16271
Mfr. Model # TDS412A16271

EHC: EHC :

This WK15PD jobber length drill bit is made of carbide and has a 18 mm diameter, 1.8898 inch long shank. It is for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS412A series jobber length drill bit has an AlCrN finish, and has metric measurements. It is coolant through with a 5.6299 inch length. Plus it has two 93 mm helical flutes, a straight shank, and 140 Degrees TDS point drill point.

This WK15PD jobber length drill bit is made of carbide and has a 18 mm diameter, 1.8898 inch long shank. It is for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS412A series jobber length drill bit has an AlCrN finish, and has metric measurements. It is coolant through with a 5.6299 inch length. Plus it has two 93 mm helical flutes, a straight shank, and 140 Degrees TDS point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $874.31 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, #27 DRILL BIT SIZE, 2 19/32 IN LENGTH, CARBIDE

WIDIA
JOBBER LENGTH DRILL BIT, #27 DRILL BIT SIZE, 2 19/32 IN LENGTH, CARBIDE
Item # WIDTDS412A03658
Mfr. Model # TDS412A03658

EHC: EHC :

This WK15PD jobber length drill bit is made of carbide and has a 6mm diameter, 1.4173 inch long shank. It is for use with cast iron, and meets the standards for DIN and ISO. This TDS412 series jobber length drill bit has an AlCrN finish, and has wire measurements. It is coolant through with a 2.5984 inch length. Plus it has two 1.1024 inch helical flutes, a straight shank, and 140 Degrees TDS point drill point.

This WK15PD jobber length drill bit is made of carbide and has a 6mm diameter, 1.4173 inch long shank. It is for use with cast iron, and meets the standards for DIN and ISO. This TDS412 series jobber length drill bit has an AlCrN finish, and has wire measurements. It is coolant through with a 2.5984 inch length. Plus it has two 1.1024 inch helical flutes, a straight shank, and 140 Degrees TDS point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $191.09 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, #20 DRILL BIT SIZE, 2 29/32 IN L

WIDIA
JOBBER LENGTH DRILL BIT, #20 DRILL BIT SIZE, 2 29/32 IN L
Item # WIDTDS412A04090
Mfr. Model # TDS412A04090

EHC: EHC :

This WK15PD jobber length drill bit is made of carbide and has a 6mm diameter, 1.4173 inch long shank. It is for use with cast iron, and meets the standards for DIN and ISO. This TDS412 series jobber length drill bit has an AlCrN finish, and has wire measurements. It is coolant through with a 74mm length. Plus it has two 36mm helical flutes, a straight shank, and 140 Degrees TDS point drill point.

This WK15PD jobber length drill bit is made of carbide and has a 6mm diameter, 1.4173 inch long shank. It is for use with cast iron, and meets the standards for DIN and ISO. This TDS412 series jobber length drill bit has an AlCrN finish, and has wire measurements. It is coolant through with a 74mm length. Plus it has two 36mm helical flutes, a straight shank, and 140 Degrees TDS point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $198.02 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 1MM DRILL BIT SIZE, 103MM OVERALL L, CARBIDE, TIALN FINISH

WIDIA
JOBBER LENGTH DRILL BIT, 1MM DRILL BIT SIZE, 103MM OVERALL L, CARBIDE, TIALN FINISH
Item # WIDTDS402A10000
Mfr. Model # TDS402A10000

EHC: EHC :

This WP20PD jobber length drill bit is made of carbide and has a 10 mm diameter, 40mm long shank. It is for use with steel, and meets ANSI, DIN, and ISO standards. This TDS402 series jobber length drill bit has a TiAlN finish, and has metric measurements. It is coolant through with a 103mm length. Plus it has two 61mm spiral flutes, a straight shank, and 140 Degrees TDS point drill point.

This WP20PD jobber length drill bit is made of carbide and has a 10 mm diameter, 40mm long shank. It is for use with steel, and meets ANSI, DIN, and ISO standards. This TDS402 series jobber length drill bit has a TiAlN finish, and has metric measurements. It is coolant through with a 103mm length. Plus it has two 61mm spiral flutes, a straight shank, and 140 Degrees TDS point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $267.11 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 20MM OVERALL L, CARBIDE, TIALN FINISH

WIDIA
JOBBER LENGTH DRILL BIT, 20MM OVERALL L, CARBIDE, TIALN FINISH
Item # WIDTDS403A18500
Mfr. Model # TDS403A18500

EHC: EHC :

This WP20PD jobber length drill bit is made of carbide and has a 20mm diameter, 50mm long shank. It is for use with steel, and meets ANSI, DIN, and ISO standards. This TDS403 series jobber length drill bit has a TiAlN finish, and has metric measurements. It is coolant through with a 200mm length. Plus it has two 148mm helical flutes, a straight shank, and 140 Degrees TDS point drill point.

This WP20PD jobber length drill bit is made of carbide and has a 20mm diameter, 50mm long shank. It is for use with steel, and meets ANSI, DIN, and ISO standards. This TDS403 series jobber length drill bit has a TiAlN finish, and has metric measurements. It is coolant through with a 200mm length. Plus it has two 148mm helical flutes, a straight shank, and 140 Degrees TDS point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $1,822.26 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 13MM DRILL BIT SIZE, 124MM OVERALL L, CARBIDE, ALCRN FINISH

WIDIA
JOBBER LENGTH DRILL BIT, 13MM DRILL BIT SIZE, 124MM OVERALL L, CARBIDE, ALCRN FINISH
Item # WIDTDS412A13000
Mfr. Model # TDS412A13000

EHC: EHC :

This WK15PD jobber length drill bit is made of carbide and has a 14 mm diameter, 45mm long shank. It is for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS412 series jobber length drill bit has an AlCrN finish, and has metric measurements. It is coolant through with a 124mm length. Plus it has two 77mm spiral flutes, a straight shank, and 140 Degrees TDS point drill point.

This WK15PD jobber length drill bit is made of carbide and has a 14 mm diameter, 45mm long shank. It is for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS412 series jobber length drill bit has an AlCrN finish, and has metric measurements. It is coolant through with a 124mm length. Plus it has two 77mm spiral flutes, a straight shank, and 140 Degrees TDS point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $549.21 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 8MM DRILL BIT SIZE, 91MM OVERALL L

WIDIA
JOBBER LENGTH DRILL BIT, 8MM DRILL BIT SIZE, 91MM OVERALL L
Item # WIDTDS412A08000
Mfr. Model # TDS412A08000

EHC: EHC :

This WK15PD jobber length drill bit is made of carbide and has a 8 mm diameter, 36mm long shank. It is for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS412 series jobber length drill bit has an AlCrN finish, and has metric measurements. It is coolant through with a 91mm length. Plus it has two 53mm spiral flutes, a straight shank, and 140 Degrees TDS point drill point.

This WK15PD jobber length drill bit is made of carbide and has a 8 mm diameter, 36mm long shank. It is for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS412 series jobber length drill bit has an AlCrN finish, and has metric measurements. It is coolant through with a 91mm length. Plus it has two 53mm spiral flutes, a straight shank, and 140 Degrees TDS point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $241.46 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, Q DRILL BIT SIZE, 4 1/32 IN LENGTH, CARBIDE

WIDIA
JOBBER LENGTH DRILL BIT, Q DRILL BIT SIZE, 4 1/32 IN LENGTH, CARBIDE
Item # WIDTDS412A08433
Mfr. Model # TDS412A08433

EHC: EHC :

This WK15PD jobber length drill bit is made of carbide and has a 25/64 inch diameter, 1 9/16 inch long shank. It is for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS412 series jobber length drill bit has an AlCrN finish, and has letter measurements. It is coolant through with a 4 1/32 inch length. Plus it has two 2⅜ inch spiral flutes, a straight shank, and 140 Degrees TDS point drill point.

This WK15PD jobber length drill bit is made of carbide and has a 25/64 inch diameter, 1 9/16 inch long shank. It is for use with cast iron, and meets ANSI, DIN, and ISO standards. This TDS412 series jobber length drill bit has an AlCrN finish, and has letter measurements. It is coolant through with a 4 1/32 inch length. Plus it has two 2⅜ inch spiral flutes, a straight shank, and 140 Degrees TDS point drill point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $264.96 / each

EHC: EHC :

Qty:

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Applied Filters

Clear All

Search within these results

Coolant-Through Solid Carbide Jobber-Length Drill Bits

417 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty

Filter Results By

Applied Filters Clear All

Search within these results

Coolant-Through Solid Carbide Jobber-Length Drill Bits

417 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Applied Filters

Clear All