Product ITEM is unavailable. See products from the same category below.
Tarauds pour tuyaux et conduits
Les tarauds pour tuyaux et conduits sont proposés dans des normes et des tailles de filetage qui sont utilisées sur les pièces des systèmes de tuyaux et conduits, car elles permettent aux pièces assemblées de former un joint étanche à la pression. Ces tarauds permettent de créer ou de réparer des filetages internes dans les tuyaux, les conduits et les raccords afin qu’ils puissent s’accoupler avec des pièces dotées de filetages externes correspondants. Ils sont tournés à l’aide d’une clé de taraudage pour les applications de taraudage manuel ou installés dans un porte-outil sur une machine pour les applications de taraudage mécanique.
Ce taraud pour tuyau 2320 en acier rapide a un diamètre de 0,312 po/une tige de 1 3/8 po de long. Il est destiné à être utilisé avec de l'acier. Il a un fini TIN et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite, est mesure 2 1/8 po de long et a 4 cannelures.
Ce taraud pour tuyau 2320 en acier rapide a un diamètre de 0,312 po/une tige de 1 3/8 po de long. Il est destiné à être utilisé avec de l'acier. Il a un fini TIN et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite, est mesure 2 1/8 po de long et a 4 cannelures.
Ce taraud pour tuyau 5319 est fabriqué en acier rapide et a un diamètre de 0,906 po/une tige de 1 7/8 po de long. Pour l’aluminium, le laiton, le bronze et le cuivre: répond aux normes ANSI/USCTI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et est 3 1/4 po de long. De plus, il a 5 cannelures.
Ce taraud pour tuyau 5319 est fabriqué en acier rapide et a un diamètre de 0,906 po/une tige de 1 7/8 po de long. Pour l’aluminium, le laiton, le bronze et le cuivre: répond aux normes ANSI/USCTI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et est 3 1/4 po de long. De plus, il a 5 cannelures.
This pipe tap is made of high speed steel and has a 0.700 inch diameter, 1¾ inch long shank. It meets the standards for ANSI. This pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 9/16 inch length. Plus it has five flutes, a straight shank.
This pipe tap is made of high speed steel and has a 0.700 inch diameter, 1¾ inch long shank. It meets the standards for ANSI. This pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 9/16 inch length. Plus it has five flutes, a straight shank.
This 5323 pipe tap is made of high speed steel and has a 0.688 inch diameter, 1 15/32 inch long shank. It is for use with steel, and meets the standards for USCTI and American National Standard straight Pipe, USCTI. This 5323 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅛ inch length, plus it has four flutes.
This 5323 pipe tap is made of high speed steel and has a 0.688 inch diameter, 1 15/32 inch long shank. It is for use with steel, and meets the standards for USCTI and American National Standard straight Pipe, USCTI. This 5323 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅛ inch length, plus it has four flutes.
This 2320 pipe tap is made of high speed steel and has a 0.906 inch diameter, 1⅞ inch long shank. It is for use with steel, and meets the standards for USCTI and American Standard Dryseal Pipe Thread, USCTI. This 2320/5320 series pipe tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3¼ inch length. Plus it has five flutes.
This 2320 pipe tap is made of high speed steel and has a 0.906 inch diameter, 1⅞ inch long shank. It is for use with steel, and meets the standards for USCTI and American Standard Dryseal Pipe Thread, USCTI. This 2320/5320 series pipe tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3¼ inch length. Plus it has five flutes.
This 5320 pipe tap is made of vanadium high speed steel and has a 0.700 inch diameter, 1½ inch long shank. It is for use with aluminum, brass, bronze, copper, and meets ANSI and USCTI standards. This 2320/5320 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 9/16 inch length, plus it has four flutes.
This 5320 pipe tap is made of vanadium high speed steel and has a 0.700 inch diameter, 1½ inch long shank. It is for use with aluminum, brass, bronze, copper, and meets ANSI and USCTI standards. This 2320/5320 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 9/16 inch length, plus it has four flutes.
This 5323 pipe tap is made of high speed steel and has a 0.700 inch diameter, 1½ inch long shank. It is for use with steel, and meets the standards for USCTI and American National Dryseal Standard straight Pipe, USCTI. This 5323 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 9/16 inch length, plus it has four flutes.
This 5323 pipe tap is made of high speed steel and has a 0.700 inch diameter, 1½ inch long shank. It is for use with steel, and meets the standards for USCTI and American National Dryseal Standard straight Pipe, USCTI. This 5323 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 9/16 inch length, plus it has four flutes.
This 5320 pipe tap is made of vanadium high speed steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is for use with aluminum, brass, bronze, copper, and meets ANSI and USCTI standards. This 2320/5320 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length, plus it has four flutes.
This 5320 pipe tap is made of vanadium high speed steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is for use with aluminum, brass, bronze, copper, and meets ANSI and USCTI standards. This 2320/5320 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length, plus it has four flutes.
This 5323 pipe tap is made of high speed steel and has a 0.437 inch diameter, 1⅜ inch long shank. It is for use with steel, and meets the standards for USCTI and American National Dryseal Standard straight Pipe, USCTI. This 5323 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length, plus it has four flutes.
This 5323 pipe tap is made of high speed steel and has a 0.437 inch diameter, 1⅜ inch long shank. It is for use with steel, and meets the standards for USCTI and American National Dryseal Standard straight Pipe, USCTI. This 5323 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length, plus it has four flutes.
This 5329PTF pipe tap is made of high speed steel and has a 0.688 inch diameter shank. It is for use with aluminum, brass, bronze, copper, hardened steel, steel, and meets the standards for USCTI and American Standard Dryseal Pipe Form and USCTI. This 5329PTF series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3⅛ inch length, plus it has four flutes.
This 5329PTF pipe tap is made of high speed steel and has a 0.688 inch diameter shank. It is for use with aluminum, brass, bronze, copper, hardened steel, steel, and meets the standards for USCTI and American Standard Dryseal Pipe Form and USCTI. This 5329PTF series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 3⅛ inch length, plus it has four flutes.
This 2320 pipe tap is made of high speed steel and has a 0.688 inch diameter, 1 15/32 inch long shank. It is for use with steel, and meets the standards for USCTI and American Standard Dryseal Pipe Thread, USCTI. This 2320/5320 series pipe tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅛ inch length, plus it has four flutes.
This 2320 pipe tap is made of high speed steel and has a 0.688 inch diameter, 1 15/32 inch long shank. It is for use with steel, and meets the standards for USCTI and American Standard Dryseal Pipe Thread, USCTI. This 2320/5320 series pipe tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅛ inch length, plus it has four flutes.
This 5320 pipe tap is made of vanadium high speed steel and has a 0.688 inch diameter, 1 15/32 inch long shank. It is for use with aluminum, brass, bronze, copper, and meets ANSI and USCTI standards. This 2320/5320 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅛ inch length, plus it has four flutes.
This 5320 pipe tap is made of vanadium high speed steel and has a 0.688 inch diameter, 1 15/32 inch long shank. It is for use with aluminum, brass, bronze, copper, and meets ANSI and USCTI standards. This 2320/5320 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅛ inch length, plus it has four flutes.
This 2320 pipe tap is made of high speed steel and has a 0.700 inch diameter, 1 5/16 inch long shank. It is for use with steel, and meets the standards for USCTI and American Standard Dryseal Pipe Thread, USCTI. This 2320/5320 series pipe tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length, plus it has four flutes.
This 2320 pipe tap is made of high speed steel and has a 0.700 inch diameter, 1 5/16 inch long shank. It is for use with steel, and meets the standards for USCTI and American Standard Dryseal Pipe Thread, USCTI. This 2320/5320 series pipe tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length, plus it has four flutes.
This 5319 pipe tap is made of high speed steel and has a 1.500 inch diameter, 1¼ inch long shank. It is designed for use with aluminum, brass, bronze, copper, and meets ANSI and USCTI standards. This 5319 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4¼ inch length. Plus it has seven flutes.
This 5319 pipe tap is made of high speed steel and has a 1.500 inch diameter, 1¼ inch long shank. It is designed for use with aluminum, brass, bronze, copper, and meets ANSI and USCTI standards. This 5319 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4¼ inch length. Plus it has seven flutes.
This 5319 pipe tap is made of high speed steel and has a 1⅛ inch diameter, 2 inch long shank. It is designed for use with aluminum, brass, bronze, copper, and meets the standards for ANSI, USCTI. This 5319 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3¾ inch length. Plus it has five flutes.
This 5319 pipe tap is made of high speed steel and has a 1⅛ inch diameter, 2 inch long shank. It is designed for use with aluminum, brass, bronze, copper, and meets the standards for ANSI, USCTI. This 5319 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3¾ inch length. Plus it has five flutes.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
