Steel Hydraulic Hose Adapters

This Seal-Lok O-ring face seal tube fitting and adapter meets the standards for ISO 8434-3, SAE J1453, has a maximum operating pressure of 9,200 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating. In addition, it is a 45 Degrees elbow. Plus, it has a 1⅞ inch hex size. This Seal-Lok O-ring face seal tube fitting and adapter includes a seal.

This Seal-Lok O-ring face seal tube fitting and adapter meets the standards for ISO 8434-3, SAE J1453, has a maximum operating pressure of 9,200 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating. In addition, it is a 45 Degrees elbow. Plus, it has a 1⅞ inch hex size. This Seal-Lok O-ring face seal tube fitting and adapter includes a seal.

This pipe fitting meets the standards for ASTM B117/ISO 9227, and is made of stainless steel. In addition, it is a straight adapter.

This pipe fitting meets the standards for ASTM B117/ISO 9227, and is made of stainless steel. In addition, it is a straight adapter.

Use this O-ring facing seal swivel adapter for use in high pressure applications where pipes and tubes might move. This adapter is male and 37 degrees.

Use this O-ring facing seal swivel adapter for use in high pressure applications where pipes and tubes might move. This adapter is male and 37 degrees.

This thread run tee meets the standards for SAE 070428, has a length of 2.06 inch, and is made of steel. In addition, it is a tee, and 7/16"-20 x 7/16"-20 thread. Plus, it has a 9/16 inch hex size.

This thread run tee meets the standards for SAE 070428, has a length of 2.06 inch, and is made of steel. In addition, it is a tee, and 7/16"-20 x 7/16"-20 thread. Plus, it has a 9/16 inch hex size.

This CLO series tube fitting and adapter meets the standards for ASTM B117, ISO 8434-3, ISO 9227, SAE J1453, has a maximum operating pressure of 6,000 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion, over torque, vibration and is made of steel. In addition, it is a 90 Degrees elbow, with an imperial/metric system of measurement.

This CLO series tube fitting and adapter meets the standards for ASTM B117, ISO 8434-3, ISO 9227, SAE J1453, has a maximum operating pressure of 6,000 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion, over torque, vibration and is made of steel. In addition, it is a 90 Degrees elbow, with an imperial/metric system of measurement.

This pipe fitting meets the standards for SAE J530, SAE J531, has a length of one inch, a maximum operating pressure of 68 bar and is designed for the following applications: air lines, cooling lines, water lines. It has an operating temperature of -53 Degrees C to 121 Degrees C, and is made of brass. In addition, it has ¼,½ thread. Plus, it has a ⅞ inch hex size.

This pipe fitting meets the standards for SAE J530, SAE J531, has a length of one inch, a maximum operating pressure of 68 bar and is designed for the following applications: air lines, cooling lines, water lines. It has an operating temperature of -53 Degrees C to 121 Degrees C, and is made of brass. In addition, it has ¼,½ thread. Plus, it has a ⅞ inch hex size.

Attach hoses and tubes onto various fittings with this one-inch pipe clamp.

Attach hoses and tubes onto various fittings with this one-inch pipe clamp.

This long elbow meets the standards for SAE 071502, is designed for the following applications: automotive transfer lines, hydraulic systems of agricultural and earth moving machinery, machine tools. This long elbow includes a seal.

This long elbow meets the standards for SAE 071502, is designed for the following applications: automotive transfer lines, hydraulic systems of agricultural and earth moving machinery, machine tools. This long elbow includes a seal.

This long elbow meets the standards for SAE 071502, is designed for the following applications: automotive transfer lines, hydraulic systems of agricultural and earth moving machinery, machine tools. This long elbow includes a seal.

This long elbow meets the standards for SAE 071502, is designed for the following applications: automotive transfer lines, hydraulic systems of agricultural and earth moving machinery, machine tools. This long elbow includes a seal.

This Seal-Lok O-ring face seal tube fitting and adapter meets the standards for ISO 8434-3, SAE J1453, has a maximum operating pressure of 9,200 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating. In addition, it is a 90 Degrees elbow. This Seal-Lok O-ring face seal tube fitting and adapter includes a seal.

This Seal-Lok O-ring face seal tube fitting and adapter meets the standards for ISO 8434-3, SAE J1453, has a maximum operating pressure of 9,200 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating. In addition, it is a 90 Degrees elbow. This Seal-Lok O-ring face seal tube fitting and adapter includes a seal.

This Seal-Lok O-ring face seal tube fitting and adapter meets the standards for ISO 8434-3, SAE J1453, has a maximum operating pressure of 9,200 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating. In addition, it is a 90 Degrees elbow. This Seal-Lok O-ring face seal tube fitting and adapter includes a seal.

This Seal-Lok O-ring face seal tube fitting and adapter meets the standards for ISO 8434-3, SAE J1453, has a maximum operating pressure of 9,200 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating. In addition, it is a 90 Degrees elbow. This Seal-Lok O-ring face seal tube fitting and adapter includes a seal.

This hydraulic hose adapter meets the standards for ANSI B1.201, FED-STD-H28/7, has a length of 1.25 inch, a maximum operating pressure of 7,200 psi @ 70 Degrees F and is made of 316 stainless steel x 316 stainless steel. In addition, it has ⅛"-27,¼"-18 thread. Plus, it has an NPTF x NPTF connection type.

This hydraulic hose adapter meets the standards for ANSI B1.201, FED-STD-H28/7, has a length of 1.25 inch, a maximum operating pressure of 7,200 psi @ 70 Degrees F and is made of 316 stainless steel x 316 stainless steel. In addition, it has ⅛"-27,¼"-18 thread. Plus, it has an NPTF x NPTF connection type.

Connect to other threaded fittings, valves, or equipment with this straight pipe nipple. Hose fitting A is male with a 1"-11 1/2 thread size and a NPTF connection type. Hose fitting B is male with a 1/2"-14 thread size and a NPTF connection type. This fitting has an overall length of 2.09 inches and conforms to SAE standards.

Connect to other threaded fittings, valves, or equipment with this straight pipe nipple. Hose fitting A is male with a 1"-11 1/2 thread size and a NPTF connection type. Hose fitting B is male with a 1/2"-14 thread size and a NPTF connection type. This fitting has an overall length of 2.09 inches and conforms to SAE standards.

With female pipe thread on all three ends, this stainless steel pipe tee joins 1/4 inch MMO tube fitting with 1/4"-18 thread port thread NPTF in hydraulic fluid applications.

With female pipe thread on all three ends, this stainless steel pipe tee joins 1/4 inch MMO tube fitting with 1/4"-18 thread port thread NPTF in hydraulic fluid applications.

Stainless steel pipe expander/adapter, the male pipe thread end fits 1/4"-18 thread NPTF and the female pipe thread fits 3/8"-18 thread NPTF. The hex measures 7/8 inches and is designed and engineered for the hydraulic fluids environment.

Stainless steel pipe expander/adapter, the male pipe thread end fits 1/4"-18 thread NPTF and the female pipe thread fits 3/8"-18 thread NPTF. The hex measures 7/8 inches and is designed and engineered for the hydraulic fluids environment.