Product ITEM is unavailable. See products from the same category below.
Diamond Saw Blades
Diamond saw blades have diamond grit on the cutting edge to cut through concrete, tile, and brittle metal, such as cast iron, in construction and road work applications. Wet-cutting blades require a water source used to keep the blade cool, extending blade life and reducing airborne dust and contaminants.
This universal turbo/segmented diamond saw blade has a nine inches diameter and a ⅝ to ⅞ inch round arbour. It has a maximum speed of 6790 revolutions per minute that cuts asphalt, concrete, and stone. The wet/dry general-purpose concrete blade is suitable for use with handheld concrete saws and walk-behind concrete saws.
This universal turbo/segmented diamond saw blade has a nine inches diameter and a ⅝ to ⅞ inch round arbour. It has a maximum speed of 6790 revolutions per minute that cuts asphalt, concrete, and stone. The wet/dry general-purpose concrete blade is suitable for use with handheld concrete saws and walk-behind concrete saws.
This SteelHead diamond cut-off saw blade is made of steel and is 14 inches in diameter. It has one inch or 20 millimetre round arbour and a maximum speed of 5500 revolutions per minute that cuts metal/stainless steel of 0.125 inch width. The blade has dry cutting and a segmented rim. It is for use with abrasive chop saws and cut-off saws.
This SteelHead diamond cut-off saw blade is made of steel and is 14 inches in diameter. It has one inch or 20 millimetre round arbour and a maximum speed of 5500 revolutions per minute that cuts metal/stainless steel of 0.125 inch width. The blade has dry cutting and a segmented rim. It is for use with abrasive chop saws and cut-off saws.
This SteelHead diamond cut-off saw blade is made of steel and has a seven inches diameter. It has a ⅝ to ⅞ inch round arbour and a maximum speed of 8730 revolutions per minute that cuts steel of 0.06 inch width. The blade has dry cutting and a segmented rim. It is for use with abrasive chop saws and cut-off saws.
This SteelHead diamond cut-off saw blade is made of steel and has a seven inches diameter. It has a ⅝ to ⅞ inch round arbour and a maximum speed of 8730 revolutions per minute that cuts steel of 0.06 inch width. The blade has dry cutting and a segmented rim. It is for use with abrasive chop saws and cut-off saws.
This diamond saw blade is made of steel and has a four-inch diameter. It has a ⅝ to ⅞ inch round arbour and a speed of 15000 RPM that cuts green concrete, asphalt, and ductile iron of 0.09 inch width. The blade has wet/dry cutting and a premium turbo rim. It is for use with handheld concrete saws, masonry saws, and walk-behind concrete saws.
This diamond saw blade is made of steel and has a four-inch diameter. It has a ⅝ to ⅞ inch round arbour and a speed of 15000 RPM that cuts green concrete, asphalt, and ductile iron of 0.09 inch width. The blade has wet/dry cutting and a premium turbo rim. It is for use with handheld concrete saws, masonry saws, and walk-behind concrete saws.
This universal turbo/segmented steel diamond saw blade has a 4½ inches diameter and a ⅝ to ⅞ inch or 20 millimetre round arbour. It has a maximum speed of 13300 revolutions per minute that cuts green concrete, asphalt, and ductile iron. The wet/dry blade is suitable for use with angle grinders/circular saws.
This universal turbo/segmented steel diamond saw blade has a 4½ inches diameter and a ⅝ to ⅞ inch or 20 millimetre round arbour. It has a maximum speed of 13300 revolutions per minute that cuts green concrete, asphalt, and ductile iron. The wet/dry blade is suitable for use with angle grinders/circular saws.
This segmented ductile iron diamond saw blade is 14 inches in diameter and fits one inch or 20 millimetre round arbour. It has a maximum speed of 5500 revolutions per minute that cuts concrete. The wet/dry ferrous metal blade is suitable for use with handheld concrete saws and table saws.
This segmented ductile iron diamond saw blade is 14 inches in diameter and fits one inch or 20 millimetre round arbour. It has a maximum speed of 5500 revolutions per minute that cuts concrete. The wet/dry ferrous metal blade is suitable for use with handheld concrete saws and table saws.
This segmented diamond saw blade is made of steel and is 14 inches in diameter. It has a ⅝ to ⅞ inch or 20 millimetre round arbour and a maximum speed of 15000 revolutions per minute. The wet/dry tuck-point blade cuts mortar, green concrete, asphalt, and a ductile iron blade. It is for use with angle grinders.
This segmented diamond saw blade is made of steel and is 14 inches in diameter. It has a ⅝ to ⅞ inch or 20 millimetre round arbour and a maximum speed of 15000 revolutions per minute. The wet/dry tuck-point blade cuts mortar, green concrete, asphalt, and a ductile iron blade. It is for use with angle grinders.
This universal segmented steel diamond saw blade has four-inch diameter and a ⅝ to ⅞ inch or 20 millimetre round arbour. It has a maximum speed of 15000 revolutions per minute that cuts all-purpose. The wet/dry green concrete, asphalt, ductile iron, and is suitable for use with angle grinders/circular saws.
This universal segmented steel diamond saw blade has four-inch diameter and a ⅝ to ⅞ inch or 20 millimetre round arbour. It has a maximum speed of 15000 revolutions per minute that cuts all-purpose. The wet/dry green concrete, asphalt, ductile iron, and is suitable for use with angle grinders/circular saws.
This segmented ductile iron diamond saw blade has a 12-inch diameter and fits one inch or 20 millimetre round arbour. It has a maximum speed of 6300 revolutions per minute that cuts concrete. The wet/dry ferrous metal blade is suitable for use with handheld concrete saws and table saws.
This segmented ductile iron diamond saw blade has a 12-inch diameter and fits one inch or 20 millimetre round arbour. It has a maximum speed of 6300 revolutions per minute that cuts concrete. The wet/dry ferrous metal blade is suitable for use with handheld concrete saws and table saws.
This SteelHead diamond cut-off saw blade is made of steel and has a five inches diameter. It has a ⅝ to ⅞ inch round arbour and a maximum speed of 12000 revolutions per minute that cuts steel of 0.05 inch width. The blade has dry cutting and a segmented rim. It is for use with abrasive chop saws and cut-off saws.
This SteelHead diamond cut-off saw blade is made of steel and has a five inches diameter. It has a ⅝ to ⅞ inch round arbour and a maximum speed of 12000 revolutions per minute that cuts steel of 0.05 inch width. The blade has dry cutting and a segmented rim. It is for use with abrasive chop saws and cut-off saws.
This universal turbo/segmented diamond saw blade is 14 inches in diameter and fits one inch or 20 millimetre round arbour. It has a maximum speed of 5500 revolutions per minute that cuts asphalt, concrete, and stone. The wet/dry general-purpose concrete blade is suitable for use with handheld concrete saws and walk-behind concrete saws.
This universal turbo/segmented diamond saw blade is 14 inches in diameter and fits one inch or 20 millimetre round arbour. It has a maximum speed of 5500 revolutions per minute that cuts asphalt, concrete, and stone. The wet/dry general-purpose concrete blade is suitable for use with handheld concrete saws and walk-behind concrete saws.
For use with concrete, this segmented blade has a 12-inch abrasive wheel diameter, with an arbour size of 1 inch. The abrasive material is diamond and sustains a maximum RPM of 6,300.
For use with concrete, this segmented blade has a 12-inch abrasive wheel diameter, with an arbour size of 1 inch. The abrasive material is diamond and sustains a maximum RPM of 6,300.
This universal turbo/segmented steel diamond saw blade has a seven inches diameter and a ⅝ to ⅞ inch round arbour. It has a maximum speed of 13300 revolutions per minute that cuts reinforced concrete, concrete, brick, block, green concrete, asphalt, stone, and granite. The wet/dry blade is suitable for use with angle grinders/circular saws.
This universal turbo/segmented steel diamond saw blade has a seven inches diameter and a ⅝ to ⅞ inch round arbour. It has a maximum speed of 13300 revolutions per minute that cuts reinforced concrete, concrete, brick, block, green concrete, asphalt, stone, and granite. The wet/dry blade is suitable for use with angle grinders/circular saws.
This SteelHead diamond cut-off saw blade is made of steel and has a 12-inch diameter. It has one inch or 20 millimetre round arbour and a maximum speed of 6300 revolutions per minute that cuts metal/stainless steel of 0.125 inch width. The blade has dry cutting and a segmented rim. It is for use with abrasive chop saws and cut-off saws.
This SteelHead diamond cut-off saw blade is made of steel and has a 12-inch diameter. It has one inch or 20 millimetre round arbour and a maximum speed of 6300 revolutions per minute that cuts metal/stainless steel of 0.125 inch width. The blade has dry cutting and a segmented rim. It is for use with abrasive chop saws and cut-off saws.
For use with concrete, this segmented blade has a 12-inch abrasive wheel diameter, with an arbour size of 1 inch. The abrasive material is diamond and sustains a maximum RPM of 6,300.
For use with concrete, this segmented blade has a 12-inch abrasive wheel diameter, with an arbour size of 1 inch. The abrasive material is diamond and sustains a maximum RPM of 6,300.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
