Carbon Steel Stick Welding Electrodes

This LA 6010, all-position, mild-steel electrode is used for producing very high quality welds and features a cellulosic DC+ covering to produce a forceful, deep-penetrating arc and a thin, friable, easily removed slag. It measures 14 inches in length with an 1/8-inch diameter, and meets CSA W48, Class E4310 standards. Available in a five-kilogram package.

This LA 6010, all-position, mild-steel electrode is used for producing very high quality welds and features a cellulosic DC+ covering to produce a forceful, deep-penetrating arc and a thin, friable, easily removed slag. It measures 14 inches in length with an 1/8-inch diameter, and meets CSA W48, Class E4310 standards. Available in a five-kilogram package.

These electrodes are used for welding mild steel. They are cellulosic DC+ and yields welds that possess mechanical properties. They measure 12 x 3/32 inches, and the cellulose in the coating produces a deep, forceful penetrating arc. They come in a package weighing 2.5 kilograms.

These electrodes are used for welding mild steel. They are cellulosic DC+ and yields welds that possess mechanical properties. They measure 12 x 3/32 inches, and the cellulose in the coating produces a deep, forceful penetrating arc. They come in a package weighing 2.5 kilograms.

This LA 7014 mild-steel electrode is a rutile based, all-position, high-speed welding electrode operating on AC or DC current. It is used for all-purpose welding applications on a variety of steels including low-to-medium carbon steels. It is 14 inches in length with an 1/8-inch diameter, and meets CSA, Class E4914 standards. Available in a five-kilogram package.

This LA 7014 mild-steel electrode is a rutile based, all-position, high-speed welding electrode operating on AC or DC current. It is used for all-purpose welding applications on a variety of steels including low-to-medium carbon steels. It is 14 inches in length with an 1/8-inch diameter, and meets CSA, Class E4914 standards. Available in a five-kilogram package.

This LA 7024 rutile AC/DC-, heavily coated, mild-steel electrode is used for flat position welding and is ideally suited for high-speed fillet weld applications. It is 12 inches in length with a 3/32-inch diameter, and meets CSA, Class E4924 standards. Available in a 2.5-kilogram package.

This LA 7024 rutile AC/DC-, heavily coated, mild-steel electrode is used for flat position welding and is ideally suited for high-speed fillet weld applications. It is 12 inches in length with a 3/32-inch diameter, and meets CSA, Class E4924 standards. Available in a 2.5-kilogram package.

This LA 7024, rutile AC/DC-, heavily coated, mild-steel electrode is used for flat position welding and is ideally suited for high-speed fillet weld applications. It is 18 inches in length with a 5/32-inch diameter, and meets CSA, Class E4924 standards. Available in a 4.5-kilogram package.

This LA 7024, rutile AC/DC-, heavily coated, mild-steel electrode is used for flat position welding and is ideally suited for high-speed fillet weld applications. It is 18 inches in length with a 5/32-inch diameter, and meets CSA, Class E4924 standards. Available in a 4.5-kilogram package.

This LA 11018-M electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 5/32 inches, and weighs 11 pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E11018-M-H4, Class E7618-M, CSA W48.

This LA 11018-M electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 5/32 inches, and weighs 11 pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E11018-M-H4, Class E7618-M, CSA W48.

This MNR Tri-Cast, DC + AC, specialty welding electrode is made with cast iron, copper, and nickel for a unique combination of softness, ductility, and a minimum tensile strength of 55,000 PSI. It is 12 inches in length with a 3/32-inch diameter, and available in a five-kilogram package.

This MNR Tri-Cast, DC + AC, specialty welding electrode is made with cast iron, copper, and nickel for a unique combination of softness, ductility, and a minimum tensile strength of 55,000 PSI. It is 12 inches in length with a 3/32-inch diameter, and available in a five-kilogram package.

This LA 6013, all-position, general-purpose, mild-steel electrode features a rutile AC/DC -/+ design for an extremely versatile and user-friendly performance. Its fast freeze slag characteristics make it ideally suited for welding sheet metal out of position (vertical down). It measures 14 inches in length with a 5/32-inch diameter, and meets CSA W48, Class E4313 standards. Available in a five-kilogram package.

This LA 6013, all-position, general-purpose, mild-steel electrode features a rutile AC/DC -/+ design for an extremely versatile and user-friendly performance. Its fast freeze slag characteristics make it ideally suited for welding sheet metal out of position (vertical down). It measures 14 inches in length with a 5/32-inch diameter, and meets CSA W48, Class E4313 standards. Available in a five-kilogram package.

Use this MNR Universal mild-steel electrode for all-round repairs and general fabrication. It has a fast-freezing slag system for maximum positional operability and is ideal for high-speed welding on thin-gauge, clean, or new steel components. It is DC +/- AC, 14 inches long with an 1/8-inch diameter, and has a minimum tensile strength of 75,000 PSI. Available in a 0.45-kilogram package.

Use this MNR Universal mild-steel electrode for all-round repairs and general fabrication. It has a fast-freezing slag system for maximum positional operability and is ideal for high-speed welding on thin-gauge, clean, or new steel components. It is DC +/- AC, 14 inches long with an 1/8-inch diameter, and has a minimum tensile strength of 75,000 PSI. Available in a 0.45-kilogram package.

This MNR Cast 99, DC + AC, specialty welding electrode is made of 99% nickel and cast iron with a 100% non-conductive flux coating for very soft machinable welds in deep recesses or close access areas. It is 12 inches long with a 3/32-inch diameter, and has a minimum tensile strength of 40,000 PSI. Available in a five-kilogram package.

This MNR Cast 99, DC + AC, specialty welding electrode is made of 99% nickel and cast iron with a 100% non-conductive flux coating for very soft machinable welds in deep recesses or close access areas. It is 12 inches long with a 3/32-inch diameter, and has a minimum tensile strength of 40,000 PSI. Available in a five-kilogram package.

These electrodes are used for welding mild steel. They are cellulosic AC/DC+ and are suited for maintenance work where dirty or rusty materials are found. They measure 14 x 3/16 inches, and the cellulose in the coating produces a stable, forceful penetrating arc. They come in a package weighing five kilograms.

These electrodes are used for welding mild steel. They are cellulosic AC/DC+ and are suited for maintenance work where dirty or rusty materials are found. They measure 14 x 3/16 inches, and the cellulose in the coating produces a stable, forceful penetrating arc. They come in a package weighing five kilograms.

This LA 18 low-hydrogen, basic DC+/AC electrode features a special low-moisture pick-up (LMP) coating. It is 14 inches in length with an 1/8-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.

This LA 18 low-hydrogen, basic DC+/AC electrode features a special low-moisture pick-up (LMP) coating. It is 14 inches in length with an 1/8-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.

This LA 8018-C3 electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 5/32 inches, and weighs 5½ pounds. It can be used for stick welding, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E5518-C3, Class E8018-C3-H4, CSA W48.

This LA 8018-C3 electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 5/32 inches, and weighs 5½ pounds. It can be used for stick welding, in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E5518-C3, Class E8018-C3-H4, CSA W48.

This LA 9018-M electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 11 pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E6218-M, Class E9018-M-H4, CSA W48.

This LA 9018-M electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 11 pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E6218-M, Class E9018-M-H4, CSA W48.

This user-friendly LA EXCELARC 18 all-position, low hydrogen, basic AC/DC+ electrode is used to weld "difficult-to-weld" steels requiring Charpy impacts down to -30 Degrees C (-20 Degrees F), combined with a low hydrogen weld deposit. Suitable applications include structural steel fabrication, mining, forestry, maintenance, and repair. It is 12 inches in length with a 3/32-inch diameter, and meets CSA, Class E4918-H8 standards. Available in a 2.5-kilogram package.

This user-friendly LA EXCELARC 18 all-position, low hydrogen, basic AC/DC+ electrode is used to weld "difficult-to-weld" steels requiring Charpy impacts down to -30 Degrees C (-20 Degrees F), combined with a low hydrogen weld deposit. Suitable applications include structural steel fabrication, mining, forestry, maintenance, and repair. It is 12 inches in length with a 3/32-inch diameter, and meets CSA, Class E4918-H8 standards. Available in a 2.5-kilogram package.

This LA 8018-C3 electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 5½ pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E5518-C3, Class E8018-C3-H4, CSA W48.

This LA 8018-C3 electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 5½ pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E5518-C3, Class E8018-C3-H4, CSA W48.