Anchors for concrete, block, and brick install into masonry surfaces and provide a threaded connection point to secure items into place. Wedge anchors, sleeve anchors, and female threaded anchors install into pilot holes in the mounting surface and create permanent anchoring points. Removable bolt anchors can reuse the same bolt with the same pilot hole for semi-permanent or temporary installations. Screw anchors and quick drive anchors are installed into pilot holes in the mounting surface and can be removed. Anchors for wet concrete embed into concrete when it is poured and lock into place as the concrete cures. Anchors for hollow block and brick and light-duty plug-style anchors create mounting points for low-load applications or applications with thinner mounting surfaces such as cinder blocks.
These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 2 3/4 x 3/16 inches and the drill bit is 4 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 1 3/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds.
These Tapcon screw anchors have a hex head drive and are for exterior insulation systems and masonry. The anchor is 2 3/4 x 3/16 inches and the drill bit is 4 1/2 x 5/32 inches. These screws have a one-inch minimum embedment and a 1 3/4-inch maximum work thickness, with an ultimate shear of 400 to 730 pounds and an ultimate tension of 220 to 340 pounds.
This sleeve anchor is made of steel and has a zinc-plated finish. It meets the standards for CSI Divisions 03 16 00, CSI Divisions 04 05 19.16, CSI Divisions 05 05 19 industry standards. This sleeve anchor is designed for use with concrete and masonry.
This sleeve anchor is made of steel and has a zinc-plated finish. It meets the standards for CSI Divisions 03 16 00, CSI Divisions 04 05 19.16, CSI Divisions 05 05 19 industry standards. This sleeve anchor is designed for use with concrete and masonry.
This flat head sleeve anchor features anti-rotation tabs and a ribbed leg design. It has a diameter of 3/8 inches and is three inches long. It's made for use in deck mounting, awnings, bracelets, steel channels, wood beams, door frames, and window frames.
This flat head sleeve anchor features anti-rotation tabs and a ribbed leg design. It has a diameter of 3/8 inches and is three inches long. It's made for use in deck mounting, awnings, bracelets, steel channels, wood beams, door frames, and window frames.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
