Solenoid Valves Less Coil

This solenoid valve body is for use with air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 4¾ inch height x 3¼ inch length, and is made of brass, with an EPM seal.

This solenoid valve body is for use with air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 4¾ inch height x 3¼ inch length, and is made of brass, with an EPM seal.

Solenoid valve, pipe size 1/2 inch, orifice diameter 5/8 inch, coefficient of volume 3.60, air flow 205 SCFM, maximum flow 36 GPM, OPD range water 0-100 PSI, safe working pressure water 300 PSI, 2 way normally closed, brass, forged body.

Solenoid valve, pipe size 1/2 inch, orifice diameter 5/8 inch, coefficient of volume 3.60, air flow 205 SCFM, maximum flow 36 GPM, OPD range water 0-100 PSI, safe working pressure water 300 PSI, 2 way normally closed, brass, forged body.

Solenoid valve, pipe size 1/4 inch, orifice diameter 1/8 inch, coefficient of volume 0.34, air flow 28.0 SCFM, maximum flow 4.2 GPM, OPD range water 0-150 PSI, safe working pressure water 500 PSI, 2 way normally closed, stainless steel, round body.

Solenoid valve, pipe size 1/4 inch, orifice diameter 1/8 inch, coefficient of volume 0.34, air flow 28.0 SCFM, maximum flow 4.2 GPM, OPD range water 0-150 PSI, safe working pressure water 500 PSI, 2 way normally closed, stainless steel, round body.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 3¾ inch height x 2 13/16 inch length, and is made of brass, with an NBR seal.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 3¾ inch height x 2 13/16 inch length, and is made of brass, with an NBR seal.

General purpose 180 degrees F solenoid valve, 2-way normally closed, brass, pipe size 3/4 inch, orifice size 3/4 inch, OPD range water 5-125 PSI, CV 5.50, safe working pressure water 300 PSI, air flow 280 (121) CFM.

General purpose 180 degrees F solenoid valve, 2-way normally closed, brass, pipe size 3/4 inch, orifice size 3/4 inch, OPD range water 5-125 PSI, CV 5.50, safe working pressure water 300 PSI, air flow 280 (121) CFM.

This solenoid valve body is for use with air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it measures 4 inch height x 1½ inch length, and is made of stainless steel, with an NBR seal.

This solenoid valve body is for use with air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it measures 4 inch height x 1½ inch length, and is made of stainless steel, with an NBR seal.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 2⅞ inch height x 1½ inch length, and is made of stainless steel, with an NBR seal.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 2⅞ inch height x 1½ inch length, and is made of stainless steel, with an NBR seal.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 4 21/32 inch height x 4 5/32 inch length, and is made of brass, with an NBR seal.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 4 21/32 inch height x 4 5/32 inch length, and is made of brass, with an NBR seal.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 2⅞ inch height x 1½ inch length, and is made of stainless steel, with an NBR seal.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 2⅞ inch height x 1½ inch length, and is made of stainless steel, with an NBR seal.

This solenoid valve body is for use with air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 3¾ inch height x 2 13/16 inch length, and is made of brass, with an EPM seal.

This solenoid valve body is for use with air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 3¾ inch height x 2 13/16 inch length, and is made of brass, with an EPM seal.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 2⅞ inch height x 1½ inch length, and is made of stainless steel, with an NBR seal.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 2⅞ inch height x 1½ inch length, and is made of stainless steel, with an NBR seal.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 2¾ inch height x 1 3/16 inch length, and is made of brass, with an NBR seal.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 2¾ inch height x 1 3/16 inch length, and is made of brass, with an NBR seal.

This solenoid valve body is for use with air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 3½ inch height x 2¾ inch length, and is made of brass, with an EPM seal.

This solenoid valve body is for use with air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 3½ inch height x 2¾ inch length, and is made of brass, with an EPM seal.

This solenoid valve body is for use with air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 5 5/16 inch height x 4 1/16 inch length, and is made of brass, with an EPM seal.

This solenoid valve body is for use with air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 5 5/16 inch height x 4 1/16 inch length, and is made of brass, with an EPM seal.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 5 3/16 inch height x 4 1/16 inch length, and is made of brass, with an NBR seal.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 5 3/16 inch height x 4 1/16 inch length, and is made of brass, with an NBR seal.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 2⅞ inch height x 1½ inch length, and is made of stainless steel, with an NBR seal.

This solenoid valve body is for use with dental equipment, humidifiers, instrumentation, vending machines, water treatment, welding equipment, air, light oil, steam, and water. It is compatible with the following brand(s): Dayton. In addition, it meets the standards for UL. It measures 2⅞ inch height x 1½ inch length, and is made of stainless steel, with an NBR seal.