Product ITEM is unavailable. See products from the same category below.
Ratcheting Combination Wrenches
Ratcheting combination wrenches have a box end design on one end of the handle with a gear mechanism that allows the wrench to rotate freely in one direction without removing the wrench head from the fastener and repositioning the wrench. The box end fits around and grips the entire head of the fastener for more contact than an open end wrench and can apply more torque since the box end is less likely to slip off the fastener compared to an open end design. The opposite end of the wrench has an open end design that allows top and side access to the fastener while the box end can only access a fastener from the top.
This wrench has a length of 5½ inch, plus it weighs 0.19 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ASME. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 5½ inch, plus it weighs 0.19 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ASME. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black chrome finish, is not non-magnetic, and is tether capable.
This combination wrench has a length of 13¼ inch, plus it weighs 1.09 pounds and is not insulated. The handle has an ergonomic style/type. It meets the standards for ASME B107.100-2023. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a full polish chrome finish, is non-magnetic, and is not tether capable.
This combination wrench has a length of 13¼ inch, plus it weighs 1.09 pounds and is not insulated. The handle has an ergonomic style/type. It meets the standards for ASME B107.100-2023. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a full polish chrome finish, is non-magnetic, and is not tether capable.
This combination wrench has a length of 16¾ inch, plus it weighs 2.29 pounds and is not insulated. The handle has an ergonomic style/type. It meets the standards for ASME B107.100-2047. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a full polish chrome finish, is non-magnetic, and is not tether capable.
This combination wrench has a length of 16¾ inch, plus it weighs 2.29 pounds and is not insulated. The handle has an ergonomic style/type. It meets the standards for ASME B107.100-2047. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a full polish chrome finish, is non-magnetic, and is not tether capable.
This combination wrench has a length of 9⅛ inch, plus it weighs 0.34 pounds and is not insulated. The handle has an ergonomic style/type. It meets the standards for ASME B107.100-2037. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a full polish chrome finish, is non-magnetic, and is not tether capable.
This combination wrench has a length of 9⅛ inch, plus it weighs 0.34 pounds and is not insulated. The handle has an ergonomic style/type. It meets the standards for ASME B107.100-2037. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a full polish chrome finish, is non-magnetic, and is not tether capable.
This combination wrench has a length of 6⅞ inch, plus it weighs 0.16 pounds and is not insulated. The handle has an ergonomic style/type. It meets the standards for ASME B107.100-2033. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a full polish chrome finish, is non-magnetic, and is not tether capable.
This combination wrench has a length of 6⅞ inch, plus it weighs 0.16 pounds and is not insulated. The handle has an ergonomic style/type. It meets the standards for ASME B107.100-2033. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a full polish chrome finish, is non-magnetic, and is not tether capable.
This combination wrench has a length of 5⅞ inch, plus it weighs 0.12 pounds and is not insulated. The handle has an ergonomic style/type. It meets the standards for ASME B107.100-2032. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a full polish chrome finish, is non-magnetic, and is not tether capable.
This combination wrench has a length of 5⅞ inch, plus it weighs 0.12 pounds and is not insulated. The handle has an ergonomic style/type. It meets the standards for ASME B107.100-2032. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a full polish chrome finish, is non-magnetic, and is not tether capable.
This combination wrench has a length of 9½ inch, plus it weighs 0.4 pounds and is not insulated. The handle has an ergonomic style/type. It meets the standards for ASME B107.100-2038. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a full polish chrome finish, is non-magnetic, and is not tether capable.
This combination wrench has a length of 9½ inch, plus it weighs 0.4 pounds and is not insulated. The handle has an ergonomic style/type. It meets the standards for ASME B107.100-2038. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a full polish chrome finish, is non-magnetic, and is not tether capable.
This wrench has a length of 6 inch, plus it weighs 0.09 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ASME B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 6 inch, plus it weighs 0.09 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ASME B107.100-2010. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 9¾ inch, plus it weighs 0.47 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ASME. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 9¾ inch, plus it weighs 0.47 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ASME. In addition, it is made of alloy steel, has a metric measurement type, is corrosion-resistant, has a black chrome finish, is not non-magnetic, and is tether capable.
Proto(R) Ratcheting Wrench features a spline ratcheting end to turn multiple fasteners while helping increase the force applied to the fastener. Spline tools engage the flats of conventional nut fasteners to move the loads away from the corner of the fastener.
Proto(R) Ratcheting Wrench features a spline ratcheting end to turn multiple fasteners while helping increase the force applied to the fastener. Spline tools engage the flats of conventional nut fasteners to move the loads away from the corner of the fastener.
Proto(R) Ratcheting Wrench features a spline ratcheting end to turn multiple fasteners while helping increase the force applied to the fastener. Spline tools engage the flats of conventional nut fasteners to move the loads away from the corner of the fastener.
Proto(R) Ratcheting Wrench features a spline ratcheting end to turn multiple fasteners while helping increase the force applied to the fastener. Spline tools engage the flats of conventional nut fasteners to move the loads away from the corner of the fastener.
Proto(R) Ratcheting Wrench features a spline ratcheting end to turn multiple fasteners while helping increase the force applied to the fastener. Spline tools engage the flats of conventional nut fasteners to move the loads away from the corner of the fastener.
Proto(R) Ratcheting Wrench features a spline ratcheting end to turn multiple fasteners while helping increase the force applied to the fastener. Spline tools engage the flats of conventional nut fasteners to move the loads away from the corner of the fastener.
Proto(R) Ratcheting Wrench features a spline ratcheting end to turn multiple fasteners while helping increase the force applied to the fastener. Spline tools engage the flats of conventional nut fasteners to move the loads away from the corner of the fastener.
Proto(R) Ratcheting Wrench features a spline ratcheting end to turn multiple fasteners while helping increase the force applied to the fastener. Spline tools engage the flats of conventional nut fasteners to move the loads away from the corner of the fastener.
This combination wrench has a length of 15⅞ inch, plus it weighs 1.85 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ASME. In addition, it is made of forged steel, has a SAE measurement type, is corrosion-resistant, has a satin chrome finish, is not non-magnetic, and is tether capable.
This combination wrench has a length of 15⅞ inch, plus it weighs 1.85 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ASME. In addition, it is made of forged steel, has a SAE measurement type, is corrosion-resistant, has a satin chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 3½ inch, plus it weighs 0.08 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ASME. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black chrome finish, is not non-magnetic, and is tether capable.
This wrench has a length of 3½ inch, plus it weighs 0.08 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ASME. In addition, it is made of alloy steel, has a SAE measurement type, is corrosion-resistant, has a black chrome finish, is not non-magnetic, and is tether capable.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
