Product ITEM is unavailable. See products from the same category below.
Mounted Flap Wheels
Mounted flap wheels have an integrated spindle that installs directly into a die grinder or other rotary tool to smooth, polish, and debur surfaces. Flap wheels smooth using the side of the wheel rather than the face, making them a good choice for cleaning edges, inside pipes, and hard-to-reach areas. Overlapping flaps expose fresh abrasive as the abrasive wears away.
This 1/4-inch shank, 1-1/2 inch length x 2-inch diameter mandrel-mounted mini flap wheel is made with 60 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 25000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1-1/2 inch length x 2-inch diameter mandrel-mounted mini flap wheel is made with 60 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 25000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 2-inch length x 2-inch diameter mandrel-mounted mini flap wheel is made with 120 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 25000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 2-inch length x 2-inch diameter mandrel-mounted mini flap wheel is made with 120 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 25000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1-inch length x 3-inch diameter mandrel-mounted mini flap wheel is made with 80 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 9500 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1-inch length x 3-inch diameter mandrel-mounted mini flap wheel is made with 80 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 9500 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1-inch length x 2-inch diameter mandrel-mounted mini flap wheel is made with 180 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 25000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1-inch length x 2-inch diameter mandrel-mounted mini flap wheel is made with 180 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 25000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 2-inch length x 2-inch diameter mandrel-mounted mini flap wheel is made with 40 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 25000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 2-inch length x 2-inch diameter mandrel-mounted mini flap wheel is made with 40 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 25000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1-inch length x 3-inch diameter mandrel-mounted mini flap wheel is made with 60 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 9500 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1-inch length x 3-inch diameter mandrel-mounted mini flap wheel is made with 60 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 9500 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1-1/2 inch length x 2-1/2 inch diameter mandrel-mounted mini flap wheel is made with 120 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 20000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1-1/2 inch length x 2-1/2 inch diameter mandrel-mounted mini flap wheel is made with 120 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 20000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1-1/2 inch length x 3-inch diameter mandrel-mounted mini flap wheel is made with 40 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1-1/2 inch length x 3-inch diameter mandrel-mounted mini flap wheel is made with 40 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 2-inch length x 3-inch diameter finishing flap wheel is made with fine grit aluminum oxide abrasive coating and operates at a maximum RPM of 8600.
This 1/4-inch shank, 2-inch length x 3-inch diameter finishing flap wheel is made with fine grit aluminum oxide abrasive coating and operates at a maximum RPM of 8600.
This 1/4-inch shank, 3/4 inch length x 3-inch diameter wheel-mounted flap wheel is made with 80 grit coated aluminum oxide abrasive. This item is sold in units of ten.
This 1/4-inch shank, 3/4 inch length x 3-inch diameter wheel-mounted flap wheel is made with 80 grit coated aluminum oxide abrasive. This item is sold in units of ten.
This 1/4-inch shank, 2-inch length x 3-inch diameter mandrel-mounted mini flap wheel is made with 40 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 9500 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 2-inch length x 3-inch diameter mandrel-mounted mini flap wheel is made with 40 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 9500 and is suitable for use on all metals, plastics and wood.
Abrasive mop with spindle used on hand held machines. For working on profiled work pieces, inner surfaces, bottlenecks and hardly accessible areas. Especially suited for radial applications on metal, wood and plastic. Dimensions (dia. x width x mandrel size):3/8 x 3/8 x 1/8. Grit 80.
Abrasive mop with spindle used on hand held machines. For working on profiled work pieces, inner surfaces, bottlenecks and hardly accessible areas. Especially suited for radial applications on metal, wood and plastic. Dimensions (dia. x width x mandrel size):3/8 x 3/8 x 1/8. Grit 80.
This 1/4-inch shank, 1/2 inch length x 1-inch diameter mandrel-mounted mini flap wheel is made with 120 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 30000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1/2 inch length x 1-inch diameter mandrel-mounted mini flap wheel is made with 120 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 30000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1-inch length x 1-inch diameter mandrel-mounted mini flap wheel is made with 120 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 30000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1-inch length x 1-inch diameter mandrel-mounted mini flap wheel is made with 120 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 30000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1/2-inch length x 2-inch diameter mandrel-mounted mini flap wheel is made with 120 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 25000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 1/2-inch length x 2-inch diameter mandrel-mounted mini flap wheel is made with 120 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 25000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 3/4 inch length x 1-inch diameter mandrel-mounted mini flap wheel is made with 80 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 30000 and is suitable for use on all metals, plastics and wood.
This 1/4-inch shank, 3/4 inch length x 1-inch diameter mandrel-mounted mini flap wheel is made with 80 grit aluminum oxide abrasive coated cloth flaps on a spindle-mounted core. It operates at a maximum RPM of 30000 and is suitable for use on all metals, plastics and wood.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
