Wheel DiameterThis is the distance from one edge of the wheel's face to the opposite edge of the face across the widest part of the wheel.
Wheels with larger diameters require less force to start them rolling and to roll them over obstacles such as uneven surfaces, thresholds, debris, and soft surfaces.
Flush & CombinationFlush edges do not have a lip and make it easier to slide items on or off the cart. Combination surfaces have one or more flush edges and one or more lipped edges to prevent items from sliding off the cart.
Distance Between ShelvesDistance between shelves is the clearance between individual shelves on the cart. It represents the maximum height of objects that each shelf can carry and is measured in inches, rounded to the nearest eighth of an inch.
Product ITEM is unavailable. See products from the same category below.
General Purpose Metal Shelf & Utility Carts
General purpose metal shelf and utility carts are more rugged and can hold heavier loads than plastic shelf and utility carts. The carts are used to organize, transport, and store items, and they have open metal shelves that allow items to be efficiently loaded and unloaded onto or off of them. Also known as service carts or open stock trucks, metal-shelf utility carts are used in a wide variety of settings, including loading docks, stock rooms, maintenance and repair shops, warehouses, and manufacturing plants.
This shelf stock cart has a capacity of 1,200 pounds, 600 pounds per shelf. It is made of 14-gauge powder-coated steel. The overall measurements of the cart are 36 x 18 inches with a distance between shelves of 26 3/4 inches. The sturdy tubular push handle height is 37 5/8 inches, and the top shelf height is 37 5/8 inches.
This shelf stock cart has a capacity of 1,200 pounds, 600 pounds per shelf. It is made of 14-gauge powder-coated steel. The overall measurements of the cart are 36 x 18 inches with a distance between shelves of 26 3/4 inches. The sturdy tubular push handle height is 37 5/8 inches, and the top shelf height is 37 5/8 inches.
Rolling stock carts. Available with 2 or 5 shelves. 1-1?2 in. x 1?8 in. angle. Iron uprights for added strength. Sturdy tubular push handle. 1-1?2 in. shelf lips up on all shelves prevent lost parts during transport. 14-gauge steel shelves. Ships full ass
Rolling stock carts. Available with 2 or 5 shelves. 1-1?2 in. x 1?8 in. angle. Iron uprights for added strength. Sturdy tubular push handle. 1-1?2 in. shelf lips up on all shelves prevent lost parts during transport. 14-gauge steel shelves. Ships full ass
Rolling stock carts. Available with 2 or 5 shelves. 1-1?2 in. x 1?8 in. angle. Iron uprights for added strength. Sturdy tubular push handle. 1-1?2 in. shelf lips up on all shelves prevent lost parts during transport. 14-gauge steel shelves. Ships full ass
Rolling stock carts. Available with 2 or 5 shelves. 1-1?2 in. x 1?8 in. angle. Iron uprights for added strength. Sturdy tubular push handle. 1-1?2 in. shelf lips up on all shelves prevent lost parts during transport. 14-gauge steel shelves. Ships full ass
This utility cart with lipped metal shelves measures 24 1/2 inch width x 41 1/2 inch height x 39 inch length, and is grey with a powder-coated finish/coating. It is made out of 14-gauge steel. In addition, it has two shelves, zero drawers, a 2,000-pound load capacity, and a flat handle.
This utility cart with lipped metal shelves measures 24 1/2 inch width x 41 1/2 inch height x 39 inch length, and is grey with a powder-coated finish/coating. It is made out of 14-gauge steel. In addition, it has two shelves, zero drawers, a 2,000-pound load capacity, and a flat handle.
This utility cart with lipped metal shelves measures 30 1/2 inch width x 38 1/2 inch height x 66 1/2 inch length, and is grey with a powder-coated finish/coating. It includes tubular push handle and is made out of 14-gauge steel. In addition, it has two shelves, zero drawers, a 1,200-pound load capacity, and a flat handle.
This utility cart with lipped metal shelves measures 30 1/2 inch width x 38 1/2 inch height x 66 1/2 inch length, and is grey with a powder-coated finish/coating. It includes tubular push handle and is made out of 14-gauge steel. In addition, it has two shelves, zero drawers, a 1,200-pound load capacity, and a flat handle.
Load up this sturdy 14-gauge powder-coated steel utility cart. Its capacity per shelf is 2,500 pounds. The cart measures 72 x 36 inches overall and comes with a tubular push handle. The distance between shelves is 26 1/2 inches, while the push handle height is 39 1/2 inches. The top shelf height is 39 1/2 inches.
Load up this sturdy 14-gauge powder-coated steel utility cart. Its capacity per shelf is 2,500 pounds. The cart measures 72 x 36 inches overall and comes with a tubular push handle. The distance between shelves is 26 1/2 inches, while the push handle height is 39 1/2 inches. The top shelf height is 39 1/2 inches.
This welded grey utility cart includes a tubular push handle, is assembled, and has two shelves. Its maximum load capacity is 5,000 pounds and its capacity per shelf is 2,500 pounds. It measures 24 length x 48 width x 39 1/2 inches height, is grey, and its distance between shelves is 16 1/2 inches. It is made of steel with a caster core made of phenolic and has a textured powder coat finish. It has a cord length of 60 inches and 12-gauge.
This welded grey utility cart includes a tubular push handle, is assembled, and has two shelves. Its maximum load capacity is 5,000 pounds and its capacity per shelf is 2,500 pounds. It measures 24 length x 48 width x 39 1/2 inches height, is grey, and its distance between shelves is 16 1/2 inches. It is made of steel with a caster core made of phenolic and has a textured powder coat finish. It has a cord length of 60 inches and 12-gauge.
This utility cart with lipped metal shelves measures 30 1/2 inch width x 68 inch height x 66 1/2 inch length, and is grey with a powder-coated finish/coating. It includes floor lock and is made out of 14-gauge steel. In addition, it has two shelves, zero drawers, a 2,400-pound load capacity, and a flat handle.
This utility cart with lipped metal shelves measures 30 1/2 inch width x 68 inch height x 66 1/2 inch length, and is grey with a powder-coated finish/coating. It includes floor lock and is made out of 14-gauge steel. In addition, it has two shelves, zero drawers, a 2,400-pound load capacity, and a flat handle.
This utility cart with flush metal shelves measures 30 1/4 inch width x 38 1/2 inch height x 52 inch length, and is grey with a powder-coated finish/coating. It includes formed steel handle and is made out of 14-gauge steel. In addition, it has two shelves, zero drawers, a 4,000-pound load capacity, and a flat handle.
This utility cart with flush metal shelves measures 30 1/4 inch width x 38 1/2 inch height x 52 inch length, and is grey with a powder-coated finish/coating. It includes formed steel handle and is made out of 14-gauge steel. In addition, it has two shelves, zero drawers, a 4,000-pound load capacity, and a flat handle.
This utility cart with lipped metal shelves measures 24 1/2 inch width x 35 inch height x 42 inch length, and is grey with a powder-coated finish/coating. It is made out of 14-gauge steel. In addition, it has two shelves, zero drawers, a 1,200-pound load capacity, and a flat handle.
This utility cart with lipped metal shelves measures 24 1/2 inch width x 35 inch height x 42 inch length, and is grey with a powder-coated finish/coating. It is made out of 14-gauge steel. In addition, it has two shelves, zero drawers, a 1,200-pound load capacity, and a flat handle.
This utility cart with lipped and flush metal shelves measures 24 1/2 inch width x 30 inch height x 42 1/2 inch length, and is grey with a powder-coated finish/coating. It is made out of 14-gauge steel. In addition, it has two shelves, zero drawers, a 1,200-pound load capacity, and a flat handle.
This utility cart with lipped and flush metal shelves measures 24 1/2 inch width x 30 inch height x 42 1/2 inch length, and is grey with a powder-coated finish/coating. It is made out of 14-gauge steel. In addition, it has two shelves, zero drawers, a 1,200-pound load capacity, and a flat handle.
This utility cart with lipped and flush metal shelves measures 24 1/4 inch width x 40 7/8 inch height x 42 1/4 inch length, and is grey with a powder-coated finish/coating. It is made out of 14-gauge steel. In addition, it has two shelves, zero drawers, a 1,200-pound load capacity plus an ergonomic handle.
This utility cart with lipped and flush metal shelves measures 24 1/4 inch width x 40 7/8 inch height x 42 1/4 inch length, and is grey with a powder-coated finish/coating. It is made out of 14-gauge steel. In addition, it has two shelves, zero drawers, a 1,200-pound load capacity plus an ergonomic handle.
This corrosion-resistant utility cart with single-side flush metal shelves measures 22 1/2 inch width x 34 inch height x 42 1/2 inch length, and is grey with a polished finish/coating. It is made out of 20-gauge stainless steel. In addition, it has three shelves, zero drawers, a 600-pound load capacity, and a flat handle.
This corrosion-resistant utility cart with single-side flush metal shelves measures 22 1/2 inch width x 34 inch height x 42 1/2 inch length, and is grey with a polished finish/coating. It is made out of 20-gauge stainless steel. In addition, it has three shelves, zero drawers, a 600-pound load capacity, and a flat handle.
This utility cart with lipped metal shelves measures 24 1/4 inch width x 60 inch height x 42 1/4 inch length, and is grey with a powder-coated finish/coating. It is made out of 14-gauge steel. In addition, it has four shelves, zero drawers, a 3,000-pound load capacity, and a flat handle.
This utility cart with lipped metal shelves measures 24 1/4 inch width x 60 inch height x 42 1/4 inch length, and is grey with a powder-coated finish/coating. It is made out of 14-gauge steel. In addition, it has four shelves, zero drawers, a 3,000-pound load capacity, and a flat handle.
This stock cart measures 18 1/4 inch width x 37 5/8 inch height x 42 1/4 inch length, and is grey with a powder-coated finish/coating. It includes tubular push handle and is made out of 14-gauge steel. In addition, it has two shelves, a 1,200-pound load capacity, a standard handle.
This stock cart measures 18 1/4 inch width x 37 5/8 inch height x 42 1/4 inch length, and is grey with a powder-coated finish/coating. It includes tubular push handle and is made out of 14-gauge steel. In addition, it has two shelves, a 1,200-pound load capacity, a standard handle.
This welded utility cart has a capacity of 1,200 pounds and is made of 1 1/2 x 1/8-inch angle iron construction. There is room for fingers on the handle. Shelf clearance is 16 3/4 inches. The 14 gauge steel is made of powder-coated steel. This cart ships fully assembled. Its measurements are 30 x 18 x 37 1/2 inches and each shelf can hold 600 pounds. The distance between shelves is 16 3/4 inches, while the tubular push handle height is 37 1/2 inches, and the top shelf height is 37 1/2 inches.
This welded utility cart has a capacity of 1,200 pounds and is made of 1 1/2 x 1/8-inch angle iron construction. There is room for fingers on the handle. Shelf clearance is 16 3/4 inches. The 14 gauge steel is made of powder-coated steel. This cart ships fully assembled. Its measurements are 30 x 18 x 37 1/2 inches and each shelf can hold 600 pounds. The distance between shelves is 16 3/4 inches, while the tubular push handle height is 37 1/2 inches, and the top shelf height is 37 1/2 inches.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
