Product ITEM is unavailable. See products from the same category below.
Diamond Saw Blades
Diamond saw blades have diamond grit on the cutting edge to cut through concrete, tile, and brittle metal, such as cast iron, in construction and road work applications. Wet-cutting blades require a water source used to keep the blade cool, extending blade life and reducing airborne dust and contaminants.
This XP diamond saw blade has a 4½ inches diameter with a 0.06 inch plate thickness and a maximum speed of 13300 revolutions per minute. It has a turbo rim, grade, and a ⅞ inch round arbour. The wet/dry cutting blade cuts masonry up to 1¼ inches depth and is suitable for use with angle grinders/masonry saws.
This XP diamond saw blade has a 4½ inches diameter with a 0.06 inch plate thickness and a maximum speed of 13300 revolutions per minute. It has a turbo rim, grade, and a ⅞ inch round arbour. The wet/dry cutting blade cuts masonry up to 1¼ inches depth and is suitable for use with angle grinders/masonry saws.
This XP diamond saw blade has a seven inches diameter with a 0.06 inch plate thickness and a maximum speed of 8700 revolutions per minute. It has a segmented rim, good grade, and a ⅝ inch round arbour. The wet cutting ceramic tile blade cuts masonry up to 2¼ inches depth and is suitable for use with angle grinders/masonry saws.
This XP diamond saw blade has a seven inches diameter with a 0.06 inch plate thickness and a maximum speed of 8700 revolutions per minute. It has a segmented rim, good grade, and a ⅝ inch round arbour. The wet cutting ceramic tile blade cuts masonry up to 2¼ inches depth and is suitable for use with angle grinders/masonry saws.
This XP Tuckpoint diamond saw blade has a four-inch diameter with a 0.25 inch plate thickness and a maximum speed of 15200 revolutions per minute. It has a segmented rim, good grade, and a ⅝ inch round arbour with a diamond knockout. The dry cutting blade cuts masonry of one inch depth and is suitable for use with angle grinders/masonry saws.
This XP Tuckpoint diamond saw blade has a four-inch diameter with a 0.25 inch plate thickness and a maximum speed of 15200 revolutions per minute. It has a segmented rim, good grade, and a ⅝ inch round arbour with a diamond knockout. The dry cutting blade cuts masonry of one inch depth and is suitable for use with angle grinders/masonry saws.
This Extreme Diamond Edge diamond saw blade made of steel is 14 inches in diameter with a 0.11 inch plate thickness and a maximum speed of 4300 revolutions per minute. It has a segmented rim, good grade, and one inch round arbour. The dry cutting blade cut ferrous metals up to five inches depth and is suitable for use with chop saws.
This Extreme Diamond Edge diamond saw blade made of steel is 14 inches in diameter with a 0.11 inch plate thickness and a maximum speed of 4300 revolutions per minute. It has a segmented rim, good grade, and one inch round arbour. The dry cutting blade cut ferrous metals up to five inches depth and is suitable for use with chop saws.
This diamond saw blade has a seven inches diameter with a 0.09 inch plate thickness and a maximum speed of 8700 revolutions per minute. It has a segmented rim, good grade, and a ⅞ inch round arbour with a diamond knockout. The dry cutting blade cuts masonry up to 2¼ inches depth and is suitable for use with angle grinders saws.
This diamond saw blade has a seven inches diameter with a 0.09 inch plate thickness and a maximum speed of 8700 revolutions per minute. It has a segmented rim, good grade, and a ⅞ inch round arbour with a diamond knockout. The dry cutting blade cuts masonry up to 2¼ inches depth and is suitable for use with angle grinders saws.
This XP diamond saw blade is 10 inches in diameter with a 0.08 inch plate thickness and a maximum speed of 6000 revolutions per minute. It has a continuous rim and a ⅝ inch round arbour. The wet cutting porcelain tile blade cuts masonry up to four inches depth and is suitable for use with tile saws.
This XP diamond saw blade is 10 inches in diameter with a 0.08 inch plate thickness and a maximum speed of 6000 revolutions per minute. It has a continuous rim and a ⅝ inch round arbour. The wet cutting porcelain tile blade cuts masonry up to four inches depth and is suitable for use with tile saws.
This diamond saw blade is 10 inches in diameter with a 0.06 inch plate thickness and a maximum speed of 6000 revolutions per minute. It has a continuous rim and a ⅝ inch round arbour. The wet cutting blade cuts masonry up to 3¾ inches depth and is suitable for use with stone saws/tile saws.
This diamond saw blade is 10 inches in diameter with a 0.06 inch plate thickness and a maximum speed of 6000 revolutions per minute. It has a continuous rim and a ⅝ inch round arbour. The wet cutting blade cuts masonry up to 3¾ inches depth and is suitable for use with stone saws/tile saws.
This diamond saw blade has a four-inch diameter with a 0.06 inch plate thickness and a maximum speed of 15200 revolutions per minute. It has a turbo/segmented rim, best grade, and a ⅞ inch round arbour. The wet/dry cutting blade cuts masonry up to one inch depth and is suitable for use with angle grinders/masonry saws.
This diamond saw blade has a four-inch diameter with a 0.06 inch plate thickness and a maximum speed of 15200 revolutions per minute. It has a turbo/segmented rim, best grade, and a ⅞ inch round arbour. The wet/dry cutting blade cuts masonry up to one inch depth and is suitable for use with angle grinders/masonry saws.
This diamond saw blade is made of steel and measures 0.08 inch thickness and 4½ inches diameter. It has a ⅞ inch round arbour and a maximum speed of 13300 revolutions per minute. The dry cutting blade has a segmented rim that cuts masonry with a maximum cutting depth of 1¼ inches. It is for use with angle grinders.
This diamond saw blade is made of steel and measures 0.08 inch thickness and 4½ inches diameter. It has a ⅞ inch round arbour and a maximum speed of 13300 revolutions per minute. The dry cutting blade has a segmented rim that cuts masonry with a maximum cutting depth of 1¼ inches. It is for use with angle grinders.
This diamond saw blade has a 4½ inches diameter with a 0.06 inch plate thickness and a maximum speed of 13300 revolutions per minute. It has a segmented rim, best grade, and a ⅝ inch round arbour. The dry/wet cutting blade cuts masonry up to 1¼ inches depth and is suitable for use with angle grinders/masonry saws.
This diamond saw blade has a 4½ inches diameter with a 0.06 inch plate thickness and a maximum speed of 13300 revolutions per minute. It has a segmented rim, best grade, and a ⅝ inch round arbour. The dry/wet cutting blade cuts masonry up to 1¼ inches depth and is suitable for use with angle grinders/masonry saws.
This XP diamond saw blade has a seven inches diameter with a 0.06 inch plate thickness and a maximum speed of 8700 revolutions per minute. It has a turbo rim, grade, and a ⅝ inch round arbour with a diamond knockout. The wet/dry cutting blade cuts masonry of two inches depth and is suitable for use with angle grinders/masonry saws.
This XP diamond saw blade has a seven inches diameter with a 0.06 inch plate thickness and a maximum speed of 8700 revolutions per minute. It has a turbo rim, grade, and a ⅝ inch round arbour with a diamond knockout. The wet/dry cutting blade cuts masonry of two inches depth and is suitable for use with angle grinders/masonry saws.
This XP diamond saw blade has a four-inch diameter with a 0.06 inch plate thickness and a maximum speed of 15200 revolutions per minute. It has a turbo rim, grade, and a ⅝ inch round arbour. The wet/dry cutting blade cuts masonry of one inch depth and is suitable for use with chop saws.
This XP diamond saw blade has a four-inch diameter with a 0.06 inch plate thickness and a maximum speed of 15200 revolutions per minute. It has a turbo rim, grade, and a ⅝ inch round arbour. The wet/dry cutting blade cuts masonry of one inch depth and is suitable for use with chop saws.
This XP diamond saw blade is 10 inches in diameter with a 0.11 inch plate thickness and a maximum speed of 6000 revolutions per minute. It has a continuous rim, good grade, and a ⅝ inch round arbour. The wet cutting ceramic tile blade cuts masonry up to four inches depth and is suitable for use with chop saws.
This XP diamond saw blade is 10 inches in diameter with a 0.11 inch plate thickness and a maximum speed of 6000 revolutions per minute. It has a continuous rim, good grade, and a ⅝ inch round arbour. The wet cutting ceramic tile blade cuts masonry up to four inches depth and is suitable for use with chop saws.
This XP diamond saw blade has a four-inch diameter with a 0.08 inch plate thickness and a maximum speed of 15200 revolutions per minute. It has a continuous rim, good grade, and a ⅝ or ⅞ inch round arbour. The dry/wet cutting blade cuts masonry up to one inch depth and is suitable for use with angle grinders/masonry saws.
This XP diamond saw blade has a four-inch diameter with a 0.08 inch plate thickness and a maximum speed of 15200 revolutions per minute. It has a continuous rim, good grade, and a ⅝ or ⅞ inch round arbour. The dry/wet cutting blade cuts masonry up to one inch depth and is suitable for use with angle grinders/masonry saws.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
