!
Browser upgrade recommended: Improve your Grainger.ca experience by upgrading your browser to Edge or Chrome. Learn more about our supported browsers.
Back to Top

Filter Results By

Applied Filters
Clear All

Shop By
Brand
Price
For Air Type
Drive Type
Includes Drive Package
Assembly
For High-Static Pressure Applications
High-Efficiency Motor
Wheel Diameter
Exhaust Airflow @ 0.500 in SP
Maximum Static Pressure ?
Nameplate Voltage
Phase
Motor Horsepower
Motor Enclosure
Wheel Material
Housing Material
Mounting Location
Number of Speeds
Maximum Inlet Air Temperature
Standards
Overall Height
Overall Width
Overall Depth
Exhaust Airflow @ 0.000 in SP

Centrifugal Upblast Exhaust Fans

Centrifugal upblast exhaust fans run quieter than axial fans making them better suited for occupied spaces. Exhausted air is directed up and away from the fan mounting surface to reduce the buildup of contaminants on the structure. Their design helps them to overcome higher static pressures and move lower volumes of air than axial fans.

https://catalogue.grainger.ca/?hybris=true

70 Results Found

In stock at branch(0)
Results per page :  16 | 32 | 48
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, BELT DRIVE, 13¼ IN WHEEL, ¼ TO ½ HP
  • Item # GFN4YY15
  • Mfr. Model # 4YY15
  • EHC: EHC :
  • This centrifugal upblast roof exhaust fan includes NEMA 1 junction box, and is made of aluminum. It features air handling quality bearings meet L10-100,000 hour minimum and measures 26⅞ inch height, and it is not speed controllable. This centrifugal upblast roof exhaust fan is designed for use with: industrial and commercial buildings, restaurants, schools. In addition, it is roof mountable, 2,256 cfm air flow, and 24⅞ inch diameter, and ½ horsepower maximum.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # 1873
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, DIRECT DRIVE, DRIVE PACK, 11 IN WHEEL, 1,049 CFM, ODP
  • Item # GFN5DVP6
  • Mfr. Model # 5DVP6
  • EHC: EHC :
  • This centrifugal upblast roof exhaust fan includes NEMA 1 junction box, and is made of aluminum. It features aluminum backward inclined and measures 21 inch width, 15⅛ inch height, 17 inch depth. This centrifugal upblast roof exhaust fan is designed for use with: industrial and commercial buildings, schools. In addition, it has one phase, 60 Hz, is roof mountable, has three speeds, is direct drive, 964 cfm @ 0.125 in SP air flow, and 21 inch diameter, and ⅛ horsepower.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # 1874
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, DIRECT DRIVE, DRIVE PACK, 8¼ IN WHEEL, 369 CFM
  • Item # GFN5DVN8
  • Mfr. Model # 5DVN8
  • EHC: EHC :
  • This centrifugal upblast roof exhaust fan includes NEMA 1 junction box, and is made of aluminum. It features aluminum backward inclined and measures 18⅜ inch width, 15¼ inch height, 15¼ inch depth. This centrifugal upblast roof exhaust fan is designed for use with: industrial and commercial buildings, schools. In addition, it has one phase, 60 Hz, is roof mountable, has three speeds, is direct drive, 325 cfm @ 0.125 in SP air flow, and 18⅜ inch diameter, and 1/30 horsepower.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # 1874
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, BELT DRIVE, DRIVE PACK, 11 IN WHEEL, 1,260 CFM, ODP
  • Item # GFN20FT09
  • Mfr. Model # 20FT09
  • EHC: EHC :
  • This centrifugal upblast roof exhaust fan includes NEMA 1 junction box, and is made of aluminum. It features air handling quality bearings meet L10-100,000 hour minimum and measures 24⅞ inch width, 30 inch height, 29 inch depth. This centrifugal upblast roof exhaust fan is designed for use with: industrial and commercial buildings, restaurants, schools. In addition, it has one phase, 60 Hz, is roof mountable, 1,209 cfm @ 0.125 in SP air flow, and 24⅞ inch diameter, and ¼ horsepower.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, BELT DRIVE, DRIVE PACK, 24½ IN WHEEL, 8,431 CFM
  • Item # GFN56JP11
  • Mfr. Model # 56JP11
  • EHC: EHC :
  • This centrifugal upblast roof exhaust fan includes NEMA 1 junction box, is made of aluminum, and it measures 42¾ inch width, 35⅝ inch height, and it is not speed controllable. This centrifugal upblast roof exhaust fan is designed for use with: industrial and commercial buildings, restaurants, schools. In addition, it has three phases, is roof/wall mountable, has one speed, it is belt driven, and 42¾ inch diameter, and 2 horsepower.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, BELT DRIVE, 14¾ IN WHEEL, ¼ TO 1 HP
  • Item # GFN56JN91
  • Mfr. Model # 56JN91
  • EHC: EHC :
  • This centrifugal upblast roof exhaust fan is made of aluminum. It measures 31½ inch height. This centrifugal upblast roof exhaust fan is designed for use with the following applications: industrial and commercial buildings, restaurants, schools. In addition it is roof/wall mountable, it is belt driven, 2,085 cfm air flow, and 1 horsepower maximum.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, BELT DRIVE, DRIVE PACK, 14¾ IN WHEEL, 2,889 CFM
  • Item # GFN60KT20
  • Mfr. Model # 60KT20
  • EHC: EHC :
  • This centrifugal upblast roof exhaust fan includes NEMA 1 junction box located inch motor enclosure, and is made of aluminum. It features air handling quality bearings meet L10-100,000 hour minimum and measures 28⅞ inch width, 31½ inch height. This exhaust fan is designed for use with: industrial/commercial buildings, restaurants, schools. In addition, it is one-phase, 60 Hz, is roof/wall mountable, 2,826 cfm @ 0.125 in SP air flow, and 28⅞ inch diameter, and ¾ horsepower.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, DIRECT DRIVE, DRIVE PACK, 11 IN WHEEL, 1,468 CFM, ODP
  • Item # GFN4HZ41
  • Mfr. Model # 4HZ41
  • EHC: EHC :
  • This exhaust fan includes NEMA 1 junction box, and is made of aluminum. It features air handling quality bearings meet L10-100,000 hour minimum and measures 24⅞ inch width, 30 inch height, 23¾ inch depth. This exhaust fan is designed for use with: industrial/commercial buildings, restaurants, schools. In addition, it is one-phase, 60 Hz, is roof mountable, has one speed, is direct drive, 1,422 cfm @ 0.125 in SP air flow, and 24⅞ inch diameter, and ¼ horsepower.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # 1874
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, DIRECT DRIVE, DRIVE PACK, 13¼ IN WHEEL, 2,366 CFM
  • Item # GFN4HZ45
  • Mfr. Model # 4HZ45
  • EHC: EHC :
  • This exhaust fan includes NEMA 1 junction box, and is made of aluminum. It features air handling quality bearings meet L10-100,000 hour minimum and measures 24⅞ inch width, 30 inch height, 25½ inch depth. This exhaust fan is designed for use with: industrial/commercial buildings, restaurants, schools. In addition, it is one-phase, 60 Hz, is roof mountable, has one speed, is direct drive, 2,305 cfm @ 0.125 in SP air flow, and 24⅞ inch diameter, and ¾ horsepower.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # 1874
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, BELT DRIVE, 14¾ IN WHEEL, ¼ TO 1 HP
  • Item # GFN1DYK4
  • Mfr. Model # 1DYK4
  • EHC: EHC :
  • This centrifugal upblast roof exhaust fan includes NEMA 1 junction box, and is made of polyester coating, steel. It measures 28⅞ inch width, 36¼ inch height, 31¾ inch depth, and it is not speed controllable. This centrifugal upblast roof exhaust fan is roof mountable, has one speed, it is belt driven, has regreasable pillow block bearings, and 28⅞ inch diameter.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, BELT DRIVE, 21¼ IN WHEEL, ¼ TO 2 HP
  • Item # GFN1DYK7
  • Mfr. Model # 1DYK7
  • EHC: EHC :
  • This centrifugal upblast roof exhaust fan includes clean out port, heat baffle, hinged base, NEMA 1 junction box, and is made of steel. It is grey, features clean out port provides easy wheel access, heat baffle provides longer motor life and measures 35⅜ inch width, 40¼ inch height, 35¾ inch depth. This centrifugal upblast roof exhaust fan is designed for use with: kitchens. In addition, it is roof mountable, 6,806 cfm air flow, and 35⅜ inch diameter, and 2 max horsepower.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, BELT DRIVE, DRIVE PACK, 24½ IN WHEEL, 9,519 CFM
  • Item # GFN56JP12
  • Mfr. Model # 56JP12
  • EHC: EHC :
  • This centrifugal upblast roof exhaust fan includes NEMA 1 junction box, is made of aluminum, and it measures 42¾ inch width, 35⅝ inch height, and it is not speed controllable. This centrifugal upblast roof exhaust fan is designed for use with: industrial and commercial buildings, restaurants, schools. In addition, it has three phases, is roof/wall mountable, has one speed, it is belt driven, and 42¾ inch diameter, and 3 horsepower.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, BELT DRIVE, 30½ IN WHEEL, ⅓ TO 5 HP
  • Item # GFN56JN96
  • Mfr. Model # 56JN96
  • EHC: EHC :
  • This centrifugal upblast roof exhaust fan is made of aluminum. It measures 37¾ inch height. This centrifugal upblast roof exhaust fan is designed for use with the following applications: industrial and commercial buildings, restaurants, schools. In addition it is roof/wall mountable, it is belt driven, 11,191 cfm air flow, and 5 horsepower maximum.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, BELT DRIVE, 24½ IN WHEEL, ½ TO 3 HP
  • Item # GFN56JP13
  • Mfr. Model # 56JP13
  • EHC: EHC :
  • This centrifugal upblast roof exhaust fan is made of aluminum. It measures 35¾ inch height. This centrifugal upblast roof exhaust fan is designed for use with the following applications: industrial and commercial buildings, restaurants, schools. In addition it is roof/wall mountable, it is belt driven, 6,891 cfm air flow, and 3 horsepower maximum.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, DIRECT DRIVE, DRIVE PACK, 16½ IN WHEEL, 3,277 CFM
  • Item # GFN56MW72
  • Mfr. Model # 56MW72
  • EHC: EHC :
  • This centrifugal upblast roof exhaust fan is made of aluminum. It measures 31½ inch height, and it is not speed controllable. This centrifugal upblast roof exhaust fan is designed for use with: industrial and commercial buildings, restaurants, schools. In addition, it has three phases, is roof/wall mountable, has one speed, is direct drive, 3,161 cfm @ 0.125 in SP air flow, 14.8 sones @ 0.250 in SP and 5 ft, 15.2 sones @ 0.125 in SP and 5 ft, sones @ 0.500 in SP and 5 ft, and ¾ horsepower.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DAYTON
  • CENTRIFUGAL UPBLAST ROOF EXHAUST FAN, BELT DRIVE, DRIVE PACK, 30½ IN WHEEL, 14,727 CFM
  • Item # GFN56MW69
  • Mfr. Model # 56MW69
  • EHC: EHC :
  • This exhaust fan includes NEMA 1 junction box, is made of aluminum, and it measures 50 inch width, 37¾ inch height. This exhaust fan is designed for use with: industrial/commercial buildings, restaurants, schools. In addition, it is three-phase, is roof/wall mountable, has one speed, it is belt driven, 14,497 cfm @ 0.125 in SP air flow, 32 sones @ 0.125 in SP and 5 ft, 32 sones @ 0.250 in SP and 5 ft, sones @ 0.500 in SP and 5 ft, 50 inch diameter, and 5 horsepower.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Results per page :  16 | 32 | 48

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list