Ball valves control the flow of chemically compatible media within a system. The ball within the valve body turns to an open and closed position by manual, electric, or pneumatic actuation. Manual-operated ball valves, also known as quarter-turn valves, open and close with a handle to control media flow. The handle visually indicates whether the valve is open or closed, depending on its position relative to the valve body. Electric-actuated ball valves open and close with an electric motor and close faster than pneumatic-actuated valves. Pneumatic-actuated ball valves open and close with compressed air, and they have a higher closing force than electric-operated valves for use in systems moving viscous liquids. Parts and accessories for ball valves replace worn components to ensure valves are in good working order.
This ball valve has a two-piece body made of 316 stainless steel and an NPT connection. Its maximum pressure is 2,000 CWP, and the maximum steam pressure is 150 SWP. The ball valve has a temperature range of -20℉ to 450℉ and a body seal made of PTFE. The valve's ball and stem are made of 316 stainless steel. This valve's pipe size is 3/4 inches, and its overall length is 2 31/32 inches. This valve's seat is made of RPTFE.
This ball valve has a two-piece body made of 316 stainless steel and an NPT connection. Its maximum pressure is 2,000 CWP, and the maximum steam pressure is 150 SWP. The ball valve has a temperature range of -20℉ to 450℉ and a body seal made of PTFE. The valve's ball and stem are made of 316 stainless steel. This valve's pipe size is 3/4 inches, and its overall length is 2 31/32 inches. This valve's seat is made of RPTFE.
This ball valve has a two-piece body made of 316 stainless steel. It has an NPT connection and a maximum pressure of 2,000 CWP. Its maximum steam pressure is 150 SWP. The ball valve has a temperature range of -20℉ to 450℉, and the body seal is made of PTFE. The seat is made of RPTFE. The valve's ball and stem are made of 316 stainless steel. This valve's pipe size is 3/8 inch, and its overall length is 2 3/64 inches. This CSA-approved valve has a blowout-proof stem.
This ball valve has a two-piece body made of 316 stainless steel. It has an NPT connection and a maximum pressure of 2,000 CWP. Its maximum steam pressure is 150 SWP. The ball valve has a temperature range of -20℉ to 450℉, and the body seal is made of PTFE. The seat is made of RPTFE. The valve's ball and stem are made of 316 stainless steel. This valve's pipe size is 3/8 inch, and its overall length is 2 3/64 inches. This CSA-approved valve has a blowout-proof stem.
This uni-body ball valve has an NPT connection and a temperature range of -50℉ to 450℉. The valve's body is made of CF8M Stainless Steel, and its stem is blowout-proof. The valve's maximum steam pressure is 150 SWP, and its maximum pressure is 2,000 CWP. This ball valve has a pipe size of 3/8 of an inch and an overall length of 2 7/32 inches. Its ball and stem are made of 316 stainless steel, and its seat is made of RPTFE. It has a reduced port and a body made of 316 stainless steel.
This uni-body ball valve has an NPT connection and a temperature range of -50℉ to 450℉. The valve's body is made of CF8M Stainless Steel, and its stem is blowout-proof. The valve's maximum steam pressure is 150 SWP, and its maximum pressure is 2,000 CWP. This ball valve has a pipe size of 3/8 of an inch and an overall length of 2 7/32 inches. Its ball and stem are made of 316 stainless steel, and its seat is made of RPTFE. It has a reduced port and a body made of 316 stainless steel.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
