Aluminum Pipe Fittings

This ASTM/ANSI/ASME-certified, class 150, two-inch hex head plug has an MNPT connection type. It is used in air, natural gas, oil, potable water, and steam-based applications and is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI.

This ASTM/ANSI/ASME-certified, class 150, two-inch hex head plug has an MNPT connection type. It is used in air, natural gas, oil, potable water, and steam-based applications and is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI.

This ANSI/ASME-certified, class 1000, 1/8-inch, hex drive plug has an NPTF male connection type. It is used in general-purpose pipe connection applications. This product's working temperature ranges between -60 Degrees F and 400 Degrees F. Its maximum operating pressure is 1000 PSI and is made of brass (nickel-plated) for good corrosion resistance.

This ANSI/ASME-certified, class 1000, 1/8-inch, hex drive plug has an NPTF male connection type. It is used in general-purpose pipe connection applications. This product's working temperature ranges between -60 Degrees F and 400 Degrees F. Its maximum operating pressure is 1000 PSI and is made of brass (nickel-plated) for good corrosion resistance.

This ASTM/ANSI/ASME-certified, class 150, 1/4-inch hex socket plug has an MNPT connection type. It is used in low-pressure applications and is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

This ASTM/ANSI/ASME-certified, class 150, 1/4-inch hex socket plug has an MNPT connection type. It is used in low-pressure applications and is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

This ISO 7.1-certified, class 150, 1/2-inch round cap has an FBSPT connection type. It is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of 0 Degrees F to 360 Degrees F.

This ISO 7.1-certified, class 150, 1/2-inch round cap has an FBSPT connection type. It is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of 0 Degrees F to 360 Degrees F.

This ISO 7.1-certified, class 150, 1/8-inch cap has an FBSPT connection type. It is made of 304 stainless steel for good corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

This ISO 7.1-certified, class 150, 1/8-inch cap has an FBSPT connection type. It is made of 304 stainless steel for good corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

This ISO 7.1-certified, class 150, 3/4-inch square head plug has an MBSPT fitting connection type. It is made of 304 stainless steel for good corrosion resistance. It has 150 PSI maximum operating pressure with overall length of 1 1/16 inches. The male thread of this pipe fitting has a pre-applied PTFE thread sealant for extra leak protection.

This ISO 7.1-certified, class 150, 3/4-inch square head plug has an MBSPT fitting connection type. It is made of 304 stainless steel for good corrosion resistance. It has 150 PSI maximum operating pressure with overall length of 1 1/16 inches. The male thread of this pipe fitting has a pre-applied PTFE thread sealant for extra leak protection.

This ISO 7.1-certified, class 150, 1/4-inch cap has an FBSPT connection type. It is used in air, natural gas, oil, potable water, and steam-based applications and is made of 304 stainless steel for good corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

This ISO 7.1-certified, class 150, 1/4-inch cap has an FBSPT connection type. It is used in air, natural gas, oil, potable water, and steam-based applications and is made of 304 stainless steel for good corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

This ISO 7.1-certified, class 150, 1/8-inch square head plug has an MBSPT connection type. It is made of 304 stainless steel for good corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of 0 Degrees F to 360 Degrees F.

This ISO 7.1-certified, class 150, 1/8-inch square head plug has an MBSPT connection type. It is made of 304 stainless steel for good corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of 0 Degrees F to 360 Degrees F.

This ISO 7.1-certified, 3/4-inch square head plug has an MBSPT connection type. It is made of 304 stainless steel for good corrosion resistance. This product has temperature range between -30 Degrees F to 320 Degrees F.

This ISO 7.1-certified, 3/4-inch square head plug has an MBSPT connection type. It is made of 304 stainless steel for good corrosion resistance. This product has temperature range between -30 Degrees F to 320 Degrees F.

This ASTM/ANSI/ASME-certified, class 150, 1 1/2-inch square head plug has an MNPT connection type. The male thread of this pipe fitting has a pre-applied PTFE thread sealant for extra leak protection. It is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of 0 Degrees F to 360 Degrees F.

This ASTM/ANSI/ASME-certified, class 150, 1 1/2-inch square head plug has an MNPT connection type. The male thread of this pipe fitting has a pre-applied PTFE thread sealant for extra leak protection. It is made of 316 stainless steel for excellent corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of 0 Degrees F to 360 Degrees F.

This ISO 7.1-certified, class 150, 3/4-inch cap has an FBSPT connection type. It is made of 304 stainless steel for good corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

This ISO 7.1-certified, class 150, 3/4-inch cap has an FBSPT connection type. It is made of 304 stainless steel for good corrosion resistance. This product has a maximum operating pressure of 150 PSI with a temperature range of -30 Degrees F to 320 Degrees F.

This ASTM/ANSI/ASME-certified, Class 150, 3/4-inch close nipple is made of aluminum and has a male NPT x male NPT connection type with seamless construction. It is used in low-to-medium pressure applications. It has a maximum operating pressure of 125 PSI.

This ASTM/ANSI/ASME-certified, Class 150, 3/4-inch close nipple is made of aluminum and has a male NPT x male NPT connection type with seamless construction. It is used in low-to-medium pressure applications. It has a maximum operating pressure of 125 PSI.

This ASTM/ANSI/ASME-certified, Class 150, 2 1/2-inch close nipple is made of aluminum and has a male NPT x male NPT connection type with seamless construction. It is used in low-to-medium pressure applications. It has a maximum operating pressure of 125 PSI.

This ASTM/ANSI/ASME-certified, Class 150, 2 1/2-inch close nipple is made of aluminum and has a male NPT x male NPT connection type with seamless construction. It is used in low-to-medium pressure applications. It has a maximum operating pressure of 125 PSI.

This ASTM/ANSI/ASME-certified, Class 150, 1/2-inch pipe nipple with sealant is made of aluminum and has a male NPT x male NPT connection type with seamless construction. It has an overall length of two-inches and is used in low-to-medium pressure applications. It has a maximum operating pressure of 125 PSI.

This ASTM/ANSI/ASME-certified, Class 150, 1/2-inch pipe nipple with sealant is made of aluminum and has a male NPT x male NPT connection type with seamless construction. It has an overall length of two-inches and is used in low-to-medium pressure applications. It has a maximum operating pressure of 125 PSI.

This ASTM/ANSI/ASME-certified, Class 150, 3/4-inch pipe nipple with sealant is made of aluminum and has a male NPT x male NPT connection type with seamless construction. It has an overall length of four-inches and is used in low-to-medium pressure applications. It has a maximum operating pressure of 125 PSI.

This ASTM/ANSI/ASME-certified, Class 150, 3/4-inch pipe nipple with sealant is made of aluminum and has a male NPT x male NPT connection type with seamless construction. It has an overall length of four-inches and is used in low-to-medium pressure applications. It has a maximum operating pressure of 125 PSI.

This ASTM/ANSI/ASME-certified, Class 150, 2 1/2-inch pipe nipple with sealant is made of aluminum and has a male NPT x male NPT connection type with seamless construction. It has an overall length of four-inches and is used in low-to-medium pressure applications. It has a maximum operating pressure of 125 PSI.

This ASTM/ANSI/ASME-certified, Class 150, 2 1/2-inch pipe nipple with sealant is made of aluminum and has a male NPT x male NPT connection type with seamless construction. It has an overall length of four-inches and is used in low-to-medium pressure applications. It has a maximum operating pressure of 125 PSI.