Fasteners
Pins
Taper Pins
Close

Filter Results By

Applied Filters

Clear All

Brand
APPROVED VENDOR

Search within these results

Shop By

Grainger Brands and Products (364)

In Stock Now (83)

Brand

APPROVED VENDOR APPROVED VENDOR (364)

Price

Under $10 Under $10 (20)
$10 - $15 $10 - $15 (25)
$15 - $20 $15 - $20 (18)
$20 - $25 $20 - $25 (18)
$25 - $30 $25 - $30 (25)
$30 - $35 $30 - $35 (34)
$35 - $40 (25)

$40 - $50 (37)

$50 - $60 (40)

$60 - $70 (39)

$70 - $80 (14)

$80 - $90 (15)

$90 - $100 (15)

$100 - $200 (31)

$200 - $300 (7)

$400 - $500 (1)
View more View less

System of Measurement

Inch Inch (263)
Metric Metric (94)

Pin Type

External Threaded with Nut External Threaded with Nut (57)
Standard Standard (300)

Material

Stainless Steel Stainless Steel (61)
Steel Steel (296)

Material Grade/Class

18-8 18-8 (61)
Not Graded Not Graded (295)

Large End Diameter

0.093 in 0.093 in (1)
0.125 in 0.125 in (2)
0.126 in 0.126 in (1)
0.142 in 0.142 in (6)
0.156 in 0.156 in (2)
0.157 in 0.157 in (9)
0.172 in 0.172 in (4)
0.173 in 0.173 in (11)
0.193 in 0.193 in (6)
0.194 in 0.194 in (12)
0.219 in 0.219 in (5)
0.22 in 0.22 in (11)
0.25 in 0.25 in (9)
0.251 in 0.251 in (22)
0.289 in 0.289 in (6)
0.29 in 0.29 in (22)
0.296 in 0.296 in (1)
0.341 in 0.341 in (7)
0.343 in 0.343 in (26)
0.409 in 0.409 in (3)
0.41 in 0.41 in (34)
0.492 in 0.492 in (7)
0.493 in 0.493 in (22)
0.5 in 0.5 in (1)
0.591 in 0.591 in (3)
0.592 in 0.592 in (12)
0.706 in 0.706 in (2)
0.707 in 0.707 in (13)
0.718 in 0.718 in (1)
1.28 mm 1.28 mm (1)
1.7 mm 1.7 mm (1)
2.2 mm 2.2 mm (1)
2.24 mm 2.24 mm (1)
2.4 mm 2.4 mm (1)
2.48 mm 2.48 mm (1)
2.6 mm 2.6 mm (1)
2.9 mm 2.9 mm (1)
3.1 mm 3.1 mm (1)
3.24 mm 3.24 mm (1)
3.28 mm 3.28 mm (1)
3.32 mm 3.32 mm (1)
3.4 mm 3.4 mm (1)
3.48 mm 3.48 mm (1)
3.6 mm 3.6 mm (1)
3.8 mm 3.8 mm (1)
4.2 mm 4.2 mm (2)
4.32 mm 4.32 mm (1)
4.4 mm 4.4 mm (1)
4.5 mm 4.5 mm (1)
4.6 mm 4.6 mm (1)
4.72 mm 4.72 mm (2)
5 mm 5 mm (1)
5.22 mm 5.22 mm (1)
5.42 mm 5.42 mm (2)
5.5 mm 5.5 mm (3)
5.62 mm 5.62 mm (2)
5.82 mm 5.82 mm (1)
6.02 mm 6.02 mm (1)
6.1 mm 6.1 mm (1)
6.22 mm 6.22 mm (1)
6.42 mm 6.42 mm (2)
6.5 mm 6.5 mm (2)
6.62 mm 6.62 mm (2)
6.82 mm 6.82 mm (1)
7 mm 7 mm (1)
7.02 mm 7.02 mm (1)
7.1 mm 7.1 mm (1)
7.21 mm 7.21 mm (1)
7.41 mm 7.41 mm (1)
7.62 mm 7.62 mm (1)
8.02 mm 8.02 mm (1)
8.24 mm 8.24 mm (1)
8.42 mm 8.42 mm (1)
8.44 mm 8.44 mm (1)
8.5 mm 8.5 mm (1)
8.64 mm 8.64 mm (2)
8.74 mm 8.74 mm (1)
8.82 mm 8.82 mm (1)
8.84 mm 8.84 mm (1)
9.04 mm 9.04 mm (2)
9.24 mm 9.24 mm (1)
9.44 mm 9.44 mm (1)
9.6 mm 9.6 mm (1)
9.64 mm 9.64 mm (1)
9.84 mm 9.84 mm (1)
10.04 mm 10.04 mm (1)
10.44 mm 10.44 mm (1)
10.66 mm 10.66 mm (1)
10.86 mm 10.86 mm (1)
11.06 mm 11.06 mm (1)
11.24 mm 11.24 mm (1)
11.26 mm 11.26 mm (1)
11.46 mm 11.46 mm (1)
11.66 mm 11.66 mm (1)
12.06 mm 12.06 mm (1)
12.86 mm 12.86 mm (1)
13.06 mm 13.06 mm (2)
13.26 mm 13.26 mm (2)
13.46 mm 13.46 mm (1)
13.66 mm 13.66 mm (1)
14.06 mm 14.06 mm (1)
14.46 mm 14.46 mm (1)
14.86 mm 14.86 mm (1)
15.06 mm 15.06 mm (1)
15.26 mm 15.26 mm (1)
17.3 mm 17.3 mm (1)
17.5 mm 17.5 mm (1)
17.7 mm 17.7 mm (1)
18.1 mm 18.1 mm (1)
18.5 mm 18.5 mm (1)

Small End Diameter

0.073 in 0.073 in (2)
0.089 in 0.089 in (1)
0.094 in 0.094 in (2)
0.104 in 0.104 in (2)
0.109 in 0.109 in (1)
0.11 in 0.11 in (3)
0.114 in 0.114 in (1)
0.12 in 0.12 in (4)
0.125 in 0.125 in (3)
0.13 in 0.13 in (4)
0.131 in 0.131 in (5)
0.135 in 0.135 in (1)
0.136 in 0.136 in (1)
0.138 in 0.138 in (1)
0.14 in 0.14 in (1)
0.141 in 0.141 in (2)
0.143 in 0.143 in (1)
0.146 in 0.146 in (3)
0.151 in 0.151 in (5)
0.156 in 0.156 in (2)
0.157 in 0.157 in (5)
0.162 in 0.162 in (1)
0.164 in 0.164 in (1)
0.165 in 0.165 in (1)
0.167 in 0.167 in (7)
0.172 in 0.172 in (2)
0.177 in 0.177 in (5)
0.183 in 0.183 in (1)
0.185 in 0.185 in (2)
0.188 in 0.188 in (6)
0.191 in 0.191 in (1)
0.193 in 0.193 in (1)
0.195 in 0.195 in (1)
0.196 in 0.196 in (2)
0.198 in 0.198 in (4)
0.203 in 0.203 in (3)
0.206 in 0.206 in (4)
0.208 in 0.208 in (3)
0.214 in 0.214 in (2)
0.216 in 0.216 in (2)
0.217 in 0.217 in (1)
0.218 in 0.218 in (1)
0.219 in 0.219 in (3)
0.222 in 0.222 in (2)
0.224 in 0.224 in (2)
0.225 in 0.225 in (1)
0.227 in 0.227 in (4)
0.229 in 0.229 in (2)
0.235 in 0.235 in (1)
0.237 in 0.237 in (3)
0.238 in 0.238 in (1)
0.242 in 0.242 in (2)
0.245 in 0.245 in (1)
0.247 in 0.247 in (4)
0.253 in 0.253 in (3)
0.258 in 0.258 in (3)
0.259 in 0.259 in (2)
0.263 in 0.263 in (1)
0.268 in 0.268 in (1)
0.27 in 0.27 in (1)
0.274 in 0.274 in (1)
0.28 in 0.28 in (2)
0.282 in 0.282 in (1)
0.284 in 0.284 in (3)
0.285 in 0.285 in (1)
0.289 in 0.289 in (2)
0.29 in 0.29 in (2)
0.296 in 0.296 in (1)
0.299 in 0.299 in (1)
0.301 in 0.301 in (2)
0.303 in 0.303 in (2)
0.305 in 0.305 in (2)
0.306 in 0.306 in (1)
0.31 in 0.31 in (1)
0.311 in 0.311 in (1)
0.313 in 0.313 in (1)
0.315 in 0.315 in (2)
0.32 in 0.32 in (1)
0.322 in 0.322 in (2)
0.324 in 0.324 in (1)
0.326 in 0.326 in (3)
0.331 in 0.331 in (1)
0.334 in 0.334 in (2)
0.336 in 0.336 in (2)
0.337 in 0.337 in (1)
0.341 in 0.341 in (1)
0.345 in 0.345 in (2)
0.347 in 0.347 in (4)
0.35 in 0.35 in (1)
0.352 in 0.352 in (1)
0.355 in 0.355 in (2)
0.357 in 0.357 in (3)
0.362 in 0.362 in (1)
0.365 in 0.365 in (3)
0.367 in 0.367 in (3)
0.368 in 0.368 in (1)
0.371 in 0.371 in (1)
0.373 in 0.373 in (1)
0.378 in 0.378 in (1)
0.386 in 0.386 in (2)
0.388 in 0.388 in (3)
0.398 in 0.398 in (2)
0.407 in 0.407 in (1)
0.409 in 0.409 in (2)
0.414 in 0.414 in (1)
0.417 in 0.417 in (1)
0.419 in 0.419 in (2)
0.428 in 0.428 in (2)
0.43 in 0.43 in (3)
0.435 in 0.435 in (2)
0.438 in 0.438 in (2)
0.44 in 0.44 in (3)
0.448 in 0.448 in (1)
0.456 in 0.456 in (1)
0.464 in 0.464 in (1)
0.466 in 0.466 in (1)
0.476 in 0.476 in (2)
0.487 in 0.487 in (2)
0.497 in 0.497 in (1)
0.506 in 0.506 in (1)
0.508 in 0.508 in (2)
0.516 in 0.516 in (1)
0.527 in 0.527 in (1)
0.529 in 0.529 in (1)
0.547 in 0.547 in (1)
0.555 in 0.555 in (1)
0.56 in 0.56 in (1)
0.571 in 0.571 in (1)
0.581 in 0.581 in (2)
0.591 in 0.591 in (1)
0.602 in 0.602 in (1)
0.612 in 0.612 in (1)
0.621 in 0.621 in (2)
0.623 in 0.623 in (3)
0.631 in 0.631 in (1)
0.642 in 0.642 in (1)
0.644 in 0.644 in (1)
0.659 in 0.659 in (1)
1 mm 1 mm (1)
1.5 mm 1.5 mm (1)
2 mm 2 mm (5)
2.5 mm 2.5 mm (2)
3 mm 3 mm (8)
4 mm 4 mm (12)
5 mm 5 mm (11)
6 mm 6 mm (13)
6.5 mm 6.5 mm (1)
7 mm 7 mm (4)
8 mm 8 mm (12)
10 mm 10 mm (10)
12 mm 12 mm (8)
13 mm 13 mm (1)
16 mm 16 mm (5)

Usable Length

1/16 in 1/16 in (1)
3/4 in 3/4 in (1)
1 in 1 in (5)
1 1/4 in 1 1/4 in (3)
1 1/2 in 1 1/2 in (5)
1 3/4 in 1 3/4 in (3)
2 in 2 in (6)
2 1/4 in 2 1/4 in (2)
2 1/2 in 2 1/2 in (7)
2 3/4 in 2 3/4 in (1)
3 in 3 in (7)
3 1/2 in 3 1/2 in (2)
4 in 4 in (6)
4 1/2 in 4 1/2 in (3)
5 in 5 in (3)
5 1/2 in 5 1/2 in (1)
6 in 6 in (3)
6 1/2 in 6 1/2 in (1)
7 in 7 in (1)
10 mm 10 mm (2)
12 mm 12 mm (2)
14 mm 14 mm (2)
16 mm 16 mm (2)
20 mm 20 mm (6)
24 mm 24 mm (4)
30 mm 30 mm (8)
35 mm 35 mm (1)
36 mm 36 mm (1)
40 mm 40 mm (6)
50 mm 50 mm (6)
60 mm 60 mm (9)
70 mm 70 mm (8)
80 mm 80 mm (8)
90 mm 90 mm (1)
100 mm 100 mm (10)
120 mm 120 mm (4)
140 mm 140 mm (3)
150 mm 150 mm (1)
160 mm 160 mm (3)

Standards

ANSI B18.8.2 ANSI B18.8.2 (2)
ANSI/ASME B18.8.2 ANSI/ASME B18.8.2 (4)
ASME B18.8.2 ASME B18.8.2 (158)
DIN 1B DIN 1B (73)
DIN 1B, ISO 2339B DIN 1B, ISO 2339B (14)
ISO 2339B ISO 2339B (7)
REACH Compliant, RoHS Compliant (4)
View more View less

Item

Pin Assortment, 100 pieces, 46 Sizes Pin Assortment, 100 pieces, 46 Sizes (1)
Pin Assortment, 120 pieces, 15 Sizes Pin Assortment, 120 pieces, 15 Sizes (1)
Taper Pin Taper Pin (362)

Large End Diameter

Done

Usable Length

Done

Small End Diameter

Done

Taper Pins

Taper pins insert into straight or tapered holes and wedge themselves into place using friction. They gradually decrease in size from the nominal diameter, moving from their head to their tips. The size of the smaller tip is directly related to the length of the pin, making it proportional in size. Some pins feature internal or external threading towards the larger end for attaching other fasteners or components.

https://catalogue.grainger.ca/?hybris=true

364 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

PIN ASSORTMENT, 100 PIECES, 46 SIZES, INCH, STANDARD FINISH, STEEL, UNGRADED, PLAIN FINISH

APPROVED VENDOR
PIN ASSORTMENT, 100 PIECES, 46 SIZES, INCH, STANDARD FINISH, STEEL, UNGRADED, PLAIN FINISH
Item # WWG2UHG7
Mfr. Model # TPKIT46100

EHC: EHC :

This pin assortment has 100 pieces and 46 sizes, is made of steel, and has a bright (uncoated) finish. Plus, it includes #3x3 inch, #4x2 inch, #4x2¼ inch, #4x3 inch, #5x2½ inch, #5x2¾ inch, #5x3 inch, #6x2¼ inch, #6x2¾ inch, #6x3 inch, 2 #0x1½ inch, 2 #0x1¼ inch, 2 #0x1¾ inch, 2 #0x¾ inch, 2 #1x2 inch, 2 #1x¾ inch, 2 #2x1¾ inch, 2 #2x2¼ inch, 2 #3x1 inch, 2 #3x2¼ inch, 2 #3x2¾ inch and more. It meets the standards for ANSI B18.8.2 and ANSI B18.8.2 material quality.

This pin assortment has 100 pieces and 46 sizes, is made of steel, and has a bright (uncoated) finish. Plus, it includes #3x3 inch, #4x2 inch, #4x2¼ inch, #4x3 inch, #5x2½ inch, #5x2¾ inch, #5x3 inch, #6x2¼ inch, #6x2¾ inch, #6x3 inch, 2 #0x1½ inch, 2 #0x1¼ inch, 2 #0x1¾ inch, 2 #0x¾ inch, 2 #1x2 inch, 2 #1x¾ inch, 2 #2x1¾ inch, 2 #2x2¼ inch, 2 #3x1 inch, 2 #3x2¼ inch, 2 #3x2¾ inch and more. It meets the standards for ANSI B18.8.2 and ANSI B18.8.2 material quality.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $217.85 / each

EHC: EHC :

Qty:

PIN ASSORTMENT, 120 PIECES, 15 SIZES, INCH, STANDARD FINISH, STEEL, UNGRADED, PLAIN FINISH

APPROVED VENDOR
PIN ASSORTMENT, 120 PIECES, 15 SIZES, INCH, STANDARD FINISH, STEEL, UNGRADED, PLAIN FINISH
Item # WWG2UHG8
Mfr. Model # TPKIT15120

EHC: EHC :

This pin assortment has 120 pieces and 15 sizes, is made of steel, and has a bright (uncoated) finish. Plus, it includes 8 #0x1 inch, 8 #0x1½ inch, 8 #1x1 inch, 8 #1x1½ inch, 8 #2/0x1 inch, 8 #2x1 inch, 8 #2x1½ inch, 8 #3/0x1 inch, 8 #3x1 inch, 8 #3x1½ inch, 8 #3x2 inch, 8 #4x1½ inch, 8 #4x2 inch, 8 #5x2 inch, 8 #6x2 inch, six-compartment plastic container. It meets the standards for ANSI B18.8.2 and ANSI B18.8.2 material quality.

This pin assortment has 120 pieces and 15 sizes, is made of steel, and has a bright (uncoated) finish. Plus, it includes 8 #0x1 inch, 8 #0x1½ inch, 8 #1x1 inch, 8 #1x1½ inch, 8 #2/0x1 inch, 8 #2x1 inch, 8 #2x1½ inch, 8 #3/0x1 inch, 8 #3x1 inch, 8 #3x1½ inch, 8 #3x2 inch, 8 #4x1½ inch, 8 #4x2 inch, 8 #5x2 inch, 8 #6x2 inch, six-compartment plastic container. It meets the standards for ANSI B18.8.2 and ANSI B18.8.2 material quality.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $189.35 / each

EHC: EHC :

Qty:

TAPER PIN, METRIC, STANDARD, 163MM SHANK L, 15.26MM LARGE END DIA, STEEL, 10 PK

APPROVED VENDOR
TAPER PIN, METRIC, STANDARD, 163MM SHANK L, 15.26MM LARGE END DIA, STEEL, 10 PK
Item # EBP38DT27
Mfr. Model # M39000.120.0160

EHC: EHC :

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 12 mm, a large end diameter of 15.26 mm plus a usable length of 160 mm and a standard pin type.

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 12 mm, a large end diameter of 15.26 mm plus a usable length of 160 mm and a standard pin type.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $272.11 / pkg. of 10

EHC: EHC :

Qty:

TAPER PIN, METRIC, STANDARD, 73MM SHANK L, 13.46MM LARGE END DIA, STEEL, 10 PK

APPROVED VENDOR
TAPER PIN, METRIC, STANDARD, 73MM SHANK L, 13.46MM LARGE END DIA, STEEL, 10 PK
Item # EBP38DT22
Mfr. Model # M39000.120.0070

EHC: EHC :

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 12 mm, a large end diameter of 13.46 mm plus a usable length of 70 mm and a standard pin type.

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 12 mm, a large end diameter of 13.46 mm plus a usable length of 70 mm and a standard pin type.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $69.47 / pkg. of 10

EHC: EHC :

Qty:

TAPER PIN, METRIC, STANDARD, 83MM SHANK L, 11.66MM LARGE END DIA, STEEL, 10 PK

APPROVED VENDOR
TAPER PIN, METRIC, STANDARD, 83MM SHANK L, 11.66MM LARGE END DIA, STEEL, 10 PK
Item # EBP38DT15
Mfr. Model # M39000.100.0080

EHC: EHC :

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 10 mm, a large end diameter of 11.66 mm plus a usable length of 80 mm and a standard pin type.

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 10 mm, a large end diameter of 11.66 mm plus a usable length of 80 mm and a standard pin type.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $61.11 / pkg. of 10

EHC: EHC :

Qty:

TAPER PIN, METRIC, STANDARD, 61MM SHANK L, 6.22MM LARGE END DIA, STEEL, 25 PK

APPROVED VENDOR
TAPER PIN, METRIC, STANDARD, 61MM SHANK L, 6.22MM LARGE END DIA, STEEL, 25 PK
Item # EBP38DR78
Mfr. Model # M39000.050.0060

EHC: EHC :

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 5 mm, a large end diameter of 6.22 mm plus a usable length of 60 mm and a standard pin type.

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 5 mm, a large end diameter of 6.22 mm plus a usable length of 60 mm and a standard pin type.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $41.86 / pkg. of 25

EHC: EHC :

Qty:

TAPER PIN, METRIC, STANDARD, 82MM SHANK L, 8.64MM LARGE END DIA, STEEL, 10 PK

APPROVED VENDOR
TAPER PIN, METRIC, STANDARD, 82MM SHANK L, 8.64MM LARGE END DIA, STEEL, 10 PK
Item # EBP38DR96
Mfr. Model # M39000.070.0080

EHC: EHC :

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 7 mm, a large end diameter of 8.64 mm plus a usable length of 80 mm and a standard pin type.

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 7 mm, a large end diameter of 8.64 mm plus a usable length of 80 mm and a standard pin type.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $40.04 / pkg. of 10

EHC: EHC :

Qty:

TAPER PIN, METRIC, STANDARD, 62MM SHANK L, 8.24MM LARGE END DIA, STEEL, 25 PK

APPROVED VENDOR
TAPER PIN, METRIC, STANDARD, 62MM SHANK L, 8.24MM LARGE END DIA, STEEL, 25 PK
Item # EBP38DR94
Mfr. Model # M39000.070.0060

EHC: EHC :

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 7 mm, a large end diameter of 8.24 mm plus a usable length of 60 mm and a standard pin type.

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 7 mm, a large end diameter of 8.24 mm plus a usable length of 60 mm and a standard pin type.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $92.25 / pkg. of 25

EHC: EHC :

Qty:

TAPER PIN, METRIC, STANDARD, 71MM SHANK L, 7.41MM LARGE END DIA, STEEL, 25 PK

APPROVED VENDOR
TAPER PIN, METRIC, STANDARD, 71MM SHANK L, 7.41MM LARGE END DIA, STEEL, 25 PK
Item # EBP38DR88
Mfr. Model # M39000.060.0070

EHC: EHC :

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 6 mm, a large end diameter of 7.41 mm plus a usable length of 70 mm and a standard pin type.

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 6 mm, a large end diameter of 7.41 mm plus a usable length of 70 mm and a standard pin type.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $63.28 / pkg. of 25

EHC: EHC :

Qty:

TAPER PIN, METRIC, STANDARD, 31MM SHANK L, 6.62MM LARGE END DIA, STEEL, 50 PK

APPROVED VENDOR
TAPER PIN, METRIC, STANDARD, 31MM SHANK L, 6.62MM LARGE END DIA, STEEL, 50 PK
Item # EBP38DR84
Mfr. Model # M39000.060.0030

EHC: EHC :

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 6 mm, a large end diameter of 6.62 mm plus a usable length of 30 mm and a standard pin type.

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 6 mm, a large end diameter of 6.62 mm plus a usable length of 30 mm and a standard pin type.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $62.67 / pkg. of 50

EHC: EHC :

Qty:

TAPER PIN, METRIC, STANDARD, 43MM SHANK L, 10.86MM LARGE END DIA, STEEL, 25 PK

APPROVED VENDOR
TAPER PIN, METRIC, STANDARD, 43MM SHANK L, 10.86MM LARGE END DIA, STEEL, 25 PK
Item # EBP38DT11
Mfr. Model # M39000.100.0040

EHC: EHC :

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 10 mm, a large end diameter of 10.86 mm plus a usable length of 40 mm and a standard pin type.

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 10 mm, a large end diameter of 10.86 mm plus a usable length of 40 mm and a standard pin type.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $86.43 / pkg. of 25

EHC: EHC :

Qty:

TAPER PIN, METRIC, STANDARD, 12MM SHANK L, 3.24MM LARGE END DIA, STEEL, 100 PK

APPROVED VENDOR
TAPER PIN, METRIC, STANDARD, 12MM SHANK L, 3.24MM LARGE END DIA, STEEL, 100 PK
Item # EBP38DR55
Mfr. Model # M39000.030.0012

EHC: EHC :

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 3 mm, a large end diameter of 3.24 mm plus a usable length of 12 mm and a standard pin type.

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 3 mm, a large end diameter of 3.24 mm plus a usable length of 12 mm and a standard pin type.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $50.06 / pkg. of 100

EHC: EHC :

Qty:

TAPER PIN, METRIC, STANDARD, 24MM SHANK L, 2.48MM LARGE END DIA, STEEL, 100 PK

APPROVED VENDOR
TAPER PIN, METRIC, STANDARD, 24MM SHANK L, 2.48MM LARGE END DIA, STEEL, 100 PK
Item # EBP38DR51
Mfr. Model # M39000.020.0024

EHC: EHC :

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 2 mm, a large end diameter of 2.48 mm plus a usable length of 24 mm and a standard pin type.

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 2 mm, a large end diameter of 2.48 mm plus a usable length of 24 mm and a standard pin type.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $246.90 / pkg. of 100

EHC: EHC :

Qty:

TAPER PIN, METRIC, STANDARD, 40MM SHANK L, 3.8MM LARGE END DIA, STEEL, 50 PK

APPROVED VENDOR
TAPER PIN, METRIC, STANDARD, 40MM SHANK L, 3.8MM LARGE END DIA, STEEL, 50 PK
Item # EBP38DR61
Mfr. Model # M39000.030.0040

EHC: EHC :

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B and ISO 2339B. It has a metric system of measurement. In addition, it has a small end diameter of 3 mm, a large end diameter of 3.8 mm plus a usable length of 40 mm and a standard pin type.

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B and ISO 2339B. It has a metric system of measurement. In addition, it has a small end diameter of 3 mm, a large end diameter of 3.8 mm plus a usable length of 40 mm and a standard pin type.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $52.56 / pkg. of 50

EHC: EHC :

Qty:

TAPER PIN, METRIC, STANDARD, 10MM SHANK L, 1.7MM LARGE END DIA, STEEL, 100 PK

APPROVED VENDOR
TAPER PIN, METRIC, STANDARD, 10MM SHANK L, 1.7MM LARGE END DIA, STEEL, 100 PK
Item # EBP38DR47
Mfr. Model # M39000.015.0010

EHC: EHC :

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 1.5 mm, a large end diameter of 1.7 mm plus a usable length of 10 mm and a standard pin type.

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 1.5 mm, a large end diameter of 1.7 mm plus a usable length of 10 mm and a standard pin type.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $81.03 / pkg. of 100

EHC: EHC :

Qty:

TAPER PIN, METRIC, STANDARD, 103MM SHANK L, 15.06MM LARGE END DIA, STEEL, 10 PK

APPROVED VENDOR
TAPER PIN, METRIC, STANDARD, 103MM SHANK L, 15.06MM LARGE END DIA, STEEL, 10 PK
Item # EBP38DT28
Mfr. Model # M39000.130.0100

EHC: EHC :

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 13 mm, a large end diameter of 15.06 mm plus a usable length of 100 mm and a standard pin type.

This taper pin is made of steel and has a bright (uncoated) finish. It meets the standards for DIN 1B. It has a metric system of measurement. In addition, it has a small end diameter of 13 mm, a large end diameter of 15.06 mm plus a usable length of 100 mm and a standard pin type.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $132.20 / pkg. of 10

EHC: EHC :

Qty:

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Applied Filters

Clear All

Search within these results

Taper Pins

364 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty

Filter Results By

Applied Filters Clear All

Search within these results

Taper Pins

364 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Applied Filters

Clear All