Product ITEM is unavailable. See products from the same category below.
Retaining-Ring Pliers & Sets
Retaining-ring pliers install and remove snap rings that fit into a bore or onto a shaft and hold components in place. Also known as circlip pliers, their tips provide a firm grip on the rings to prevent them from flying off. Each pair of pliers adjusts its jaws to accommodate rings within a set diameter range. Retaining-ring pliers are commonly used to place rings on actuators, gear assemblies, motor shafts, and other machinery.
18 piece retaining ring pliers set. Includes 1 internal and 1 external pliers. Covers: internal 3/8 to 2 inch: external 1/4 to 2 inch 16 tips: (4) 90 degrees x .038 inch, (4) 45 degrees x 0.047 inch, (4) 0 degrees x 0.047 inch and (4) 0 degrees x 0.070 inch
18 piece retaining ring pliers set. Includes 1 internal and 1 external pliers. Covers: internal 3/8 to 2 inch: external 1/4 to 2 inch 16 tips: (4) 90 degrees x .038 inch, (4) 45 degrees x 0.047 inch, (4) 0 degrees x 0.047 inch and (4) 0 degrees x 0.070 inch
12 piece convertible retaining ring pliers kit in a blow molded case. Contains 0, 45 and 90 degrees retaining ring pliers in each of the following tip sizes: 0.038, 0.047, 0.070 and 0.090 inch. Covers internal sizes 3/8 to 3 inches and external sizes 1/4 to 3-11/32 inches.
12 piece convertible retaining ring pliers kit in a blow molded case. Contains 0, 45 and 90 degrees retaining ring pliers in each of the following tip sizes: 0.038, 0.047, 0.070 and 0.090 inch. Covers internal sizes 3/8 to 3 inches and external sizes 1/4 to 3-11/32 inches.
This retaining ring pliers has a length of 6 inch, plus it weighs 0.19 pounds. The handle is red. It features precision ground tips and meets the standards for ASME B107.500-2010. In addition, it is non-sparking, with a standard cushion grip.
This retaining ring pliers has a length of 6 inch, plus it weighs 0.19 pounds. The handle is red. It features precision ground tips and meets the standards for ASME B107.500-2010. In addition, it is non-sparking, with a standard cushion grip.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 90 degrees. Tip size 0.038 inch. Length 5-11/16 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 90 degrees. Tip size 0.038 inch. Length 5-11/16 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 0 degrees. Tip size 0.038 inch. Length 5-7/8 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 0 degrees. Tip size 0.038 inch. Length 5-7/8 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 0 degrees. Tip size 0.070 inch. Length 7-1/2 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 0 degrees. Tip size 0.070 inch. Length 7-1/2 inches.
This Proto series retaining ring plier set has a length of 6 inch, 7¼ inch. The handle is red. It features no screws to tighten. In addition, it is non-sparking, with a standard cushion grip. This retaining ring plier set includes two retaining ring convertible pliers 6 inch, two retaining ring convertible pliers 7¼ inch.
This Proto series retaining ring plier set has a length of 6 inch, 7¼ inch. The handle is red. It features no screws to tighten. In addition, it is non-sparking, with a standard cushion grip. This retaining ring plier set includes two retaining ring convertible pliers 6 inch, two retaining ring convertible pliers 7¼ inch.
This retaining ring pliers has a length of 6 inch, plus it weighs 0.19 pounds. The handle is red. It features precision ground tips and meets the standards for ASME B107.500-2010. In addition, it is non-sparking, with a standard cushion grip.
This retaining ring pliers has a length of 6 inch, plus it weighs 0.19 pounds. The handle is red. It features precision ground tips and meets the standards for ASME B107.500-2010. In addition, it is non-sparking, with a standard cushion grip.
This retaining ring pliers has a length of 7¼ inch, plus it weighs 0.33 pounds. The handle is red. It features precision ground tips and meets the standards for ASME B107.500-2010. In addition, it is non-sparking, with a standard cushion grip.
This retaining ring pliers has a length of 7¼ inch, plus it weighs 0.33 pounds. The handle is red. It features precision ground tips and meets the standards for ASME B107.500-2010. In addition, it is non-sparking, with a standard cushion grip.
This retaining ring pliers has a length of 7¼ inch, plus it weighs 0.33 pounds. The handle is red. It features precision ground tips and meets the standards for ASME B107.500-2010. In addition, it is non-sparking, with a standard cushion grip.
This retaining ring pliers has a length of 7¼ inch, plus it weighs 0.33 pounds. The handle is red. It features precision ground tips and meets the standards for ASME B107.500-2010. In addition, it is non-sparking, with a standard cushion grip.
6-1/8 inch external retaining ring pliers. Tip angle 0 degrees. Tip size 0.038 inch. Shaft diameter 1/4 to 1 inch. Use with external retaining rings. Fixed tips are precision formed and induction hardened for accurate fit and long wear.
6-1/8 inch external retaining ring pliers. Tip angle 0 degrees. Tip size 0.038 inch. Shaft diameter 1/4 to 1 inch. Use with external retaining rings. Fixed tips are precision formed and induction hardened for accurate fit and long wear.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 45 degrees. Tip size 0.047 inch. Length 5-3/4 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 45 degrees. Tip size 0.047 inch. Length 5-3/4 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 0 degrees. Tip size 0.047 inch. Length 5-7/8 inches.
Convertible snap ring pliers convert from internal to external or vice versa. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Tip angle 0 degrees. Tip size 0.047 inch. Length 5-7/8 inches.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
