Vannes à bille manuelles

Ce robinet à tournant sphérique est fabriqué en acier au carbone et possède un type de connexion femelle-femelle. La pression de service maximale du robinet pour l'eau, l'huile et le gaz. Il a 1 500 lb/po2 et une taille de tuyau de 1 1/4 pouce. Le robinet a un passage intégral et une structure en deux pièces.

Ce robinet à tournant sphérique est fabriqué en acier au carbone et possède un type de connexion femelle-femelle. La pression de service maximale du robinet pour l'eau, l'huile et le gaz. Il a 1 500 lb/po2 et une taille de tuyau de 1 1/4 pouce. Le robinet a un passage intégral et une structure en deux pièces.

Ce robinet à tournant sphérique a une connexion femelle-femelle et un passage intégral. La pression maximale du robinet à tournant sphérique est de 600 lb/po2 WOG et sa pression de vapeur maximale est de 150 lb/po2. Ce robinet à tournant sphérique est fabriqué en laiton et sa taille de tuyau est de 1 1/2 pouce.

Ce robinet à tournant sphérique a une connexion femelle-femelle et un passage intégral. La pression maximale du robinet à tournant sphérique est de 600 lb/po2 WOG et sa pression de vapeur maximale est de 150 lb/po2. Ce robinet à tournant sphérique est fabriqué en laiton et sa taille de tuyau est de 1 1/2 pouce.

Ce robinet à tournant sphérique a un tuyau femelle et une connexion femelle-femelle. Il est utilisé pour le gaz naturel et le propane et a une pression de service maximale de cinq lb/po2. Il a une taille de tuyau de 3/4 de pouce et ses plages de température sont de -40℉ à 125℉ et de -40℃ à 52℃. Ce robinet à tournant sphérique est fait de laiton forgé et est approuvé CSA.

Ce robinet à tournant sphérique a un tuyau femelle et une connexion femelle-femelle. Il est utilisé pour le gaz naturel et le propane et a une pression de service maximale de cinq lb/po2. Il a une taille de tuyau de 3/4 de pouce et ses plages de température sont de -40℉ à 125℉ et de -40℃ à 52℃. Ce robinet à tournant sphérique est fait de laiton forgé et est approuvé CSA.

This ball valve is made of carbon steel and has a female-to-female connection. The valve's maximum working pressure for water, oil, and gas is 3,000 PSI, and it has a full port. The valve has a pipe size of 3/4 inch and a two-piece structure.

This ball valve is made of carbon steel and has a female-to-female connection. The valve's maximum working pressure for water, oil, and gas is 3,000 PSI, and it has a full port. The valve has a pipe size of 3/4 inch and a two-piece structure.

This ball valve has a full port and a two-piece structure. The valve's connection is female-to-female, and its maximum pressure is 2,000 PSI for water, oil, and gas. The valve has a pipe size of 3/4 inch and is made of 316 stainless steel.

This ball valve has a full port and a two-piece structure. The valve's connection is female-to-female, and its maximum pressure is 2,000 PSI for water, oil, and gas. The valve has a pipe size of 3/4 inch and is made of 316 stainless steel.

This ball valve is made of carbon steel and has a female-to-female connection. The valve has a maximum working pressure of 1,500 PSI for water, oil, and gas. It has a full port, its pipe size is 1 1/2 inches, and it has a two-piece structure.

This ball valve is made of carbon steel and has a female-to-female connection. The valve has a maximum working pressure of 1,500 PSI for water, oil, and gas. It has a full port, its pipe size is 1 1/2 inches, and it has a two-piece structure.

This three-way ball valve is made of forged brass, and it has a female pipe that ends three ways. The maximum working pressure is 400 PSI for water, oil, and gas. The ball valve's NPT size is 1 1/2 inches.

This three-way ball valve is made of forged brass, and it has a female pipe that ends three ways. The maximum working pressure is 400 PSI for water, oil, and gas. The ball valve's NPT size is 1 1/2 inches.

This ball valve is made of carbon steel and has a female-to-female connection. The valve has a maximum working pressure of 2,000 PSI for water, oil, and gas. It has a full port, its pipe size is one inch, and it has a two-piece structure.

This ball valve is made of carbon steel and has a female-to-female connection. The valve has a maximum working pressure of 2,000 PSI for water, oil, and gas. It has a full port, its pipe size is one inch, and it has a two-piece structure.

This three-way ball valve is made of forged brass and has a female pipe that ends three ways. The maximum working pressure for this ball valve is 400 PSI for water, oil, and gas. The ball valve's NPT size is 1/2-inch.

This three-way ball valve is made of forged brass and has a female pipe that ends three ways. The maximum working pressure for this ball valve is 400 PSI for water, oil, and gas. The ball valve's NPT size is 1/2-inch.

This ball valve has a full port and a two-piece structure. The valve's connection is female-to-female, and its maximum pressure is 1,500 PSI for water, oil, and gas. The valve is made of 316 stainless steel and has a pipe size of 1 1/2 inches.

This ball valve has a full port and a two-piece structure. The valve's connection is female-to-female, and its maximum pressure is 1,500 PSI for water, oil, and gas. The valve is made of 316 stainless steel and has a pipe size of 1 1/2 inches.

This ball valve has a female-to-female connection and a full port. It has a maximum pressure is 400 PSI WOG and a maximum steam pressure of 150 PSI. It is made out of brass and has a pipe size of four inches. It has a stainless steel handle and a temperature range of 400℉.

This ball valve has a female-to-female connection and a full port. It has a maximum pressure is 400 PSI WOG and a maximum steam pressure of 150 PSI. It is made out of brass and has a pipe size of four inches. It has a stainless steel handle and a temperature range of 400℉.

This ball valve is made of carbon steel and has a female-to-female connection. The valve's maximum working pressure for water, oil, and gas is 2,000 PSI. The valve has a standard port, a pipe size of one inch, and a one-piece structure.

This ball valve is made of carbon steel and has a female-to-female connection. The valve's maximum working pressure for water, oil, and gas is 2,000 PSI. The valve has a standard port, a pipe size of one inch, and a one-piece structure.

This ball valve has a female pipe and a female-to-female connection. The maximum working pressure for this ball valve is 600 PSI for water, oil, and gas. The maximum steam pressure is 150 PSI WSP. The ball valve's NPT size is 1/4-inch, and its temperature range is -40℉ to 150℉. The ball valve is made of forged brass.

This ball valve has a female pipe and a female-to-female connection. The maximum working pressure for this ball valve is 600 PSI for water, oil, and gas. The maximum steam pressure is 150 PSI WSP. The ball valve's NPT size is 1/4-inch, and its temperature range is -40℉ to 150℉. The ball valve is made of forged brass.

This ball valve is made of forged brass and has a female-to-female connection type. It has a full port and a maximum saturated steam pressure of 150 PSI WSP. The ball valve has a locking lever handle and a maximum pressure of 600 PSI WOG. The valve's pipe size is 1/2-inch.

This ball valve is made of forged brass and has a female-to-female connection type. It has a full port and a maximum saturated steam pressure of 150 PSI WSP. The ball valve has a locking lever handle and a maximum pressure of 600 PSI WOG. The valve's pipe size is 1/2-inch.

This ball valve has a female pipe and a female-to-female connection. The valve is used for natural and propane gas and has a maximum working pressure of five PSI. Its pipe size is 1/2-inch, and its temperature ranges are -40℉ to 125℉ and -40C to 52C. This ball valve is made of forged brass and is CSA-approved.

This ball valve has a female pipe and a female-to-female connection. The valve is used for natural and propane gas and has a maximum working pressure of five PSI. Its pipe size is 1/2-inch, and its temperature ranges are -40℉ to 125℉ and -40C to 52C. This ball valve is made of forged brass and is CSA-approved.

This ball valve has a standard port and a one-piece structure. It has a female-to-female connection and a maximum pressure of 2,000 PSI for water, oil, and gas. The valve is made of 316 stainless steel and has a pipe size of 1/2-inch.

This ball valve has a standard port and a one-piece structure. It has a female-to-female connection and a maximum pressure of 2,000 PSI for water, oil, and gas. The valve is made of 316 stainless steel and has a pipe size of 1/2-inch.