Product ITEM is unavailable. See products from the same category below.
Threadlockers for Metals
These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are colour-coded to represent their locking strength and other unique properties. They are anaerobic, which means they begin to cure in the absence of air, and in the presence of metal ions when threads are engaged. Threadlockers can be applied directly to fasteners with active metal ions such as plain steel, copper, iron, and brass. For inactive metals such as stainless steel, aluminum, and coated or plated metals, threadlockers require a primer to prepare the surface and accelerate curing. Primerless threadlockers work on both active and inactive metals without the need for a primer.
This high-strength threadlocker is red and comes in a 0.34 fluid ounce bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This high-strength threadlocker has a working time of four minutes, and has a threadlocking strength of high.
This high-strength threadlocker is red and comes in a 0.34 fluid ounce bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This high-strength threadlocker has a working time of four minutes, and has a threadlocking strength of high.
These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.
These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.
This low-strength threadlocker is purple and comes in a 1.69 fluid ounce bottle. It meets the standards for Mil-S-46163-A Type II Grade M. This low-strength threadlocker has a working time of 20 minutes, and has a threadlocking strength of low, and it meets mil spec.
This low-strength threadlocker is purple and comes in a 1.69 fluid ounce bottle. It meets the standards for Mil-S-46163-A Type II Grade M. This low-strength threadlocker has a working time of 20 minutes, and has a threadlocking strength of low, and it meets mil spec.
This high-strength threadlocker is red and comes in a 8.45 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This high-strength threadlocker has a working time of 8 minutes, and has a threadlocking strength of high, and is oil tolerant.
This high-strength threadlocker is red and comes in a 8.45 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This high-strength threadlocker has a working time of 8 minutes, and has a threadlocking strength of high, and is oil tolerant.
This medium-strength threadlocker is blue and comes in a 0.34 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This medium-strength threadlocker has a working time of five minutes, and has a threadlocking strength of medium.
This medium-strength threadlocker is blue and comes in a 0.34 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This medium-strength threadlocker has a working time of five minutes, and has a threadlocking strength of medium.
This high-strength threadlocker is red and comes in a 8.45 fluid ounce bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This high-strength threadlocker has a working time of 40 minutes, and has a threadlocking strength of high, and is high-temperature resistant.
This high-strength threadlocker is red and comes in a 8.45 fluid ounce bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This high-strength threadlocker has a working time of 40 minutes, and has a threadlocking strength of high, and is high-temperature resistant.
This high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This high-strength threadlocker has a working time of 15 minutes, and has a threadlocking strength of high, and is high-temperature resistant.
This high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This high-strength threadlocker has a working time of 15 minutes, and has a threadlocking strength of high, and is high-temperature resistant.
This thread locker is green in colour and comes in a 50 mL bottle. It meets the standards for ASTM D-5363, Mil-S-22473E Grade AA, and RoHs. This thread locker has a threadlocking strength of high, and is no-drip.
This thread locker is green in colour and comes in a 50 mL bottle. It meets the standards for ASTM D-5363, Mil-S-22473E Grade AA, and RoHs. This thread locker has a threadlocking strength of high, and is no-drip.
This thread locker is yellow and comes in a 50 mL bottle. It meets the standards for ASTM D5363, Mil-S-22473E Grade B, RoHs. This thread locker has a threadlocking strength of medium, and has a no-drip formula.
This thread locker is yellow and comes in a 50 mL bottle. It meets the standards for ASTM D5363, Mil-S-22473E Grade B, RoHs. This thread locker has a threadlocking strength of medium, and has a no-drip formula.
This primerless high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This primerless high-strength threadlocker has a working time of 10 minutes, and has a threadlocking strength of high, and is oil tolerant, primerless.
This primerless high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This primerless high-strength threadlocker has a working time of 10 minutes, and has a threadlocking strength of high, and is oil tolerant, primerless.
This low-strength threadlocker is purple and comes in a 1.69 fluid ounce bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This low-strength threadlocker has a working time of 20 minutes, and has a threadlocking strength of low, and is oil tolerant.
This low-strength threadlocker is purple and comes in a 1.69 fluid ounce bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This low-strength threadlocker has a working time of 20 minutes, and has a threadlocking strength of low, and is oil tolerant.
This high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This high-strength threadlocker has a working time of 8 minutes, and has a threadlocking strength of high, and is oil tolerant.
This high-strength threadlocker is red and comes in a 1.69 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This high-strength threadlocker has a working time of 8 minutes, and has a threadlocking strength of high, and is oil tolerant.
Ce frein-filets haute résistance est rouge et est livré dans une bouteille de 1,69oz liq. Il répond aux normes ASTM,MIL-S-46163-A et UL. Ce frein-filets de haute résistance nécessite un temps de travail de 5min et offre une force de blocage des filetages élevée. Il est également résistant aux huiles.
Ce frein-filets haute résistance est rouge et est livré dans une bouteille de 1,69oz liq. Il répond aux normes ASTM,MIL-S-46163-A et UL. Ce frein-filets de haute résistance nécessite un temps de travail de 5min et offre une force de blocage des filetages élevée. Il est également résistant aux huiles.
Ce frein-filets est bleu et est livré dans une bouteille de 50mL. Il répond aux normes RoHS. Ce frein-filets nécessite un temps de travail de 20min, offre une force de blocage des filetages moyenne et est anti-goutte.
Ce frein-filets est bleu et est livré dans une bouteille de 50mL. Il répond aux normes RoHS. Ce frein-filets nécessite un temps de travail de 20min, offre une force de blocage des filetages moyenne et est anti-goutte.
Ce frein-filets haute résistance est rouge et est livré dans une bouteille de 0,34oz liq. Il répond aux normes ASTM,MIL-S-46163-A. Ce frein-filets de haute résistance nécessite un temps de travail de 8min et offre une force de blocage des filetages élevée. Il est également résistant aux huiles.
Ce frein-filets haute résistance est rouge et est livré dans une bouteille de 0,34oz liq. Il répond aux normes ASTM,MIL-S-46163-A. Ce frein-filets de haute résistance nécessite un temps de travail de 8min et offre une force de blocage des filetages élevée. Il est également résistant aux huiles.
Ce composé de couleur noire est idéal pour une utilisation dans les trous profonds, les trous à angle élevé, les trous problématiques, les fouets et les trous horizontaux. Le paquet de 22 livres comprend la résine et le durcisseur. Le composé adhère au verre, à la maçonnerie, au métal, au plastique, au PVC, au caoutchouc et à l'uréthane. Il a un temps de séchage d'une minute et peut être appliqué à des températures comprises entre -29 et 82 ℃.
Ce composé de couleur noire est idéal pour une utilisation dans les trous profonds, les trous à angle élevé, les trous problématiques, les fouets et les trous horizontaux. Le paquet de 22 livres comprend la résine et le durcisseur. Le composé adhère au verre, à la maçonnerie, au métal, au plastique, au PVC, au caoutchouc et à l'uréthane. Il a un temps de séchage d'une minute et peut être appliqué à des températures comprises entre -29 et 82 ℃.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
