Tarauds pour tuyaux et conduits

Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,437 po/une tige de 1 3/8 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et une longueur de 2 1/8 po. De plus, il a 4 cannelures et une tige droite.

Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,437 po/une tige de 1 3/8 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et une longueur de 2 1/8 po. De plus, il a 4 cannelures et une tige droite.

This M2 pipe tap is made of high speed steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60155 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60155 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.688 inch diameter, 1¾ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60255 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅛ inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.688 inch diameter, 1¾ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60255 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3⅛ inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.700 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60205 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 9/16 inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.700 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60205 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 9/16 inch length. Plus it has four flutes and a straight shank.

This pipe tap set includes four taper taps in thread sizes 1/8"-27, 1/4"-18, 3/8"-18, and 1/4"-14. These NPT taps are made from high speed steel and are for use in aluminum, mild steel, and stainless steel.

This pipe tap set includes four taper taps in thread sizes 1/8"-27, 1/4"-18, 3/8"-18, and 1/4"-14. These NPT taps are made from high speed steel and are for use in aluminum, mild steel, and stainless steel.

This M2 pipe tap is made of high speed steel and has a 0.312 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60105 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.312 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60105 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.

High speed steel, ground thread general purpose pipe tap. Nominal pipe size 1/4 inch-18, 4 flutes, thread length 1-1/16 inches, and overall length 2-7/16 inches.

High speed steel, ground thread general purpose pipe tap. Nominal pipe size 1/4 inch-18, 4 flutes, thread length 1-1/16 inches, and overall length 2-7/16 inches.

This pipe tap has a 1/4"-18 thread and has a shank diameter of 0.437 inches. The NPT threads are made of high-speed steel and it has an overall length of 2 7/16 inches.

This pipe tap has a 1/4"-18 thread and has a shank diameter of 0.437 inches. The NPT threads are made of high-speed steel and it has an overall length of 2 7/16 inches.

This hand tap is made of carbon steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 312-6015 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length. Plus it has four flutes and a straight shank.

This hand tap is made of carbon steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 312-6015 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length. Plus it has four flutes and a straight shank.

This pipe tap has a 3/8"-18 thread and has a shank diameter of 0.437 inches. The NPT threads are made of high-speed steel and it has an overall length of 2 9/16 inches.

This pipe tap has a 3/8"-18 thread and has a shank diameter of 0.437 inches. The NPT threads are made of high-speed steel and it has an overall length of 2 9/16 inches.

Pipe tap, high speed steel, interrupted, threading both ferrous and non ferrous materials where chip disposal is a problem, first few threads are full , the balance of the threads are interrupted to reduce drag while tapering pipe threading.

Pipe tap, high speed steel, interrupted, threading both ferrous and non ferrous materials where chip disposal is a problem, first few threads are full , the balance of the threads are interrupted to reduce drag while tapering pipe threading.

This M2 pipe tap is made of high speed steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60155 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60155 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.906 inch diameter, 1⅞ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-60305 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3¼ inch length. Plus it has five flutes, a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.906 inch diameter, 1⅞ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-60305 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3¼ inch length. Plus it has five flutes, a straight shank.

This pipe tap has a 1/2"-14 thread and has a shank diameter of 0.437 inches. The NPT threads are made of high-speed steel and it has an overall length of 3 1/8 inches.

This pipe tap has a 1/2"-14 thread and has a shank diameter of 0.437 inches. The NPT threads are made of high-speed steel and it has an overall length of 3 1/8 inches.

Ce robinet de tuyau conique a un filetage 1/2"-14 NPT et une taille de foret de 45/64". Ce taraud est fabriqué en acier allié au carbone et est destiné à être utilisé dans l'acier et les métaux non ferreux.

Ce robinet de tuyau conique a un filetage 1/2"-14 NPT et une taille de foret de 45/64". Ce taraud est fabriqué en acier allié au carbone et est destiné à être utilisé dans l'acier et les métaux non ferreux.