Product ITEM is unavailable. See products from the same category below.
Tarauds à entrée hélicoïdale à haute performance pour l'acier et l'acier inoxydable
Ces tarauds à pointe hélicoïdale haute performance offrent une plus grande précision et une meilleure exactitude que les tarauds à pointe hélicoïdale à usage général lorsqu’ils sont utilisés pour fileter des trous dans l’acier ou l’acier inoxydable. Les tarauds à pointes hélicoïdales haute performance sont plus durs et plus résistants à l’usure que les tarauds à pointes hélicoïdales à usage général. Les tarauds ont des goujures droites avec une pointe hélicoïdale qui pousse les copeaux devant le taraud lorsqu’il se déplace dans un trou et sort de l’autre côté, forçant ainsi les copeaux en dehors du trou. Ils créent des filetages internes dans les trous débouchants et s’installent dans un porte-outils sur une machine telle qu’un tour ou une machine à commande numérique.
High performance tap, high speed steel gun tap, steam oxide surface treatment for extended wear, gun taps shoot chips ahead reducing clogging in the flute, ideal for threading a wide variety of ductile materials.
High performance tap, high speed steel gun tap, steam oxide surface treatment for extended wear, gun taps shoot chips ahead reducing clogging in the flute, ideal for threading a wide variety of ductile materials.
Metric Gun(TM) tap. Use for through hole tapping in a wide variety of materials. Chips are pushed ahead of the cutting action to reduce clogging. High speed steel construction. Plug chamfer 3 to 5 pitches. Tap size and pitch (mm): M2 x 0.4.
Metric Gun(TM) tap. Use for through hole tapping in a wide variety of materials. Chips are pushed ahead of the cutting action to reduce clogging. High speed steel construction. Plug chamfer 3 to 5 pitches. Tap size and pitch (mm): M2 x 0.4.
High speed steel gun tap. The Gun Tap shoots the chips ahead of the cutting action, thus reducing loading and clogging in the flutes. Ideal for threading a wide variety of ductile materials, copper, and copper alloys. Brass and non-metallics.
High speed steel gun tap. The Gun Tap shoots the chips ahead of the cutting action, thus reducing loading and clogging in the flutes. Ideal for threading a wide variety of ductile materials, copper, and copper alloys. Brass and non-metallics.
This spiral point tap is made of high speed steel and has a 0.255 inch diameter, 1½ inch long shank. It is designed for use with steel, and meets ANSI standards. This 5301/2301 series spiral point tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 0.255 inch diameter, 1½ inch long shank. It is designed for use with steel, and meets ANSI standards. This 5301/2301 series spiral point tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2½ inch length. Plus it has two flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 0.194 inch diameter, 1½ inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 5301/2301 series spiral point tap has a bright (uncoated) finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 0.194 inch diameter, 1½ inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 5301/2301 series spiral point tap has a bright (uncoated) finish, and has pipe measurements. It is non-coolant through, has right hand direction with a 2⅜ inch length. Plus it has two flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 0.480 inch diameter, 2 inch long shank. It is for use with aluminum, brass, bronze, copper, and meets ANSI standards. This 5301/2301 series spiral point tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3 13/16 inch length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 0.480 inch diameter, 2 inch long shank. It is for use with aluminum, brass, bronze, copper, and meets ANSI standards. This 5301/2301 series spiral point tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3 13/16 inch length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 0.480 inch diameter, 2 inch long shank. It is for use with steel, and meets the standards for USCTI. This 5301F series spiral point tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-13/16 inch length. Plus it has three flutes and a straight shank.
This spiral point tap is made of high speed steel and has a 0.480 inch diameter, 2 inch long shank. It is for use with steel, and meets the standards for USCTI. This 5301F series spiral point tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3-13/16 inch length. Plus it has three flutes and a straight shank.
This spiral point tap is made of vanadium high speed steel and has a 3.57mm diameter, 1.3100 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 5351/2351 series spiral point tap has a TiN finish, and has metric measurements. It is non-coolant through, has right hand direction with a 49 mm length. Plus it has two flutes and a straight shank.
This spiral point tap is made of vanadium high speed steel and has a 3.57mm diameter, 1.3100 inch long shank. It is designed for use with steel, and meets the standards for ANSI. This 5351/2351 series spiral point tap has a TiN finish, and has metric measurements. It is non-coolant through, has right hand direction with a 49 mm length. Plus it has two flutes and a straight shank.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
