Bulk Air Hoses

Use for suction or fluid transfer. The E-Z Form(TM) hose is 2 9/16 inches and red in colour. It is composed of black nitrile with multi-ply textile and wire helix, which gives the hose strength and a high temperature rating. The hose is designed for temperatures between -29 Degrees C - 93 Degrees C.

Use for suction or fluid transfer. The E-Z Form(TM) hose is 2 9/16 inches and red in colour. It is composed of black nitrile with multi-ply textile and wire helix, which gives the hose strength and a high temperature rating. The hose is designed for temperatures between -29 Degrees C - 93 Degrees C.

The E-Z Form(TM) hose can withstand temperature extremes between -29 Degrees C - 93 Degrees C. It has a high temperature and strength rating, and is made of black nitrile with multi-ply textile and wire helix. The hose is 3 inches and red in colour.

The E-Z Form(TM) hose can withstand temperature extremes between -29 Degrees C - 93 Degrees C. It has a high temperature and strength rating, and is made of black nitrile with multi-ply textile and wire helix. The hose is 3 inches and red in colour.

Pop on a Jiffy Hose anywhere you need hosing. It measures 0.375 x 0.375 inches. The hose is red and for use with air tools, water, mild chemicals and various petroleum products. No clamps or special tools are needed for the Jiffy Hose. It is MSHA-approved and is oil-resistant as well as being silicone-free.

Pop on a Jiffy Hose anywhere you need hosing. It measures 0.375 x 0.375 inches. The hose is red and for use with air tools, water, mild chemicals and various petroleum products. No clamps or special tools are needed for the Jiffy Hose. It is MSHA-approved and is oil-resistant as well as being silicone-free.

This black rubber air hose can withstand 225 PSI. It measures 20 x 3/8 x 3/4 inches. Made of EPDM rubber, the air line has a male thread 1/2 NPT. It meets standards DOT FMVSS No. 106 and SAE J1402. This air line comes with a swivel fitting for the tractor-end connection.

This black rubber air hose can withstand 225 PSI. It measures 20 x 3/8 x 3/4 inches. Made of EPDM rubber, the air line has a male thread 1/2 NPT. It meets standards DOT FMVSS No. 106 and SAE J1402. This air line comes with a swivel fitting for the tractor-end connection.

Need an air hose? Something to convey water, mild chemicals, and various petroleum products? Try the jiffy push-on hose. It measures 0.500 x 0.750 inches and is sold per foot. The hose is blue and for use with air tools, water, mild chemicals and various petroleum products. It is oil-resistant. No clamps or special tools are needed for the jiffy hose. It is MSHA-approved and silicone-free.

Need an air hose? Something to convey water, mild chemicals, and various petroleum products? Try the jiffy push-on hose. It measures 0.500 x 0.750 inches and is sold per foot. The hose is blue and for use with air tools, water, mild chemicals and various petroleum products. It is oil-resistant. No clamps or special tools are needed for the jiffy hose. It is MSHA-approved and silicone-free.

Consider a fresh hose for your air line system. This hose adheres to standards DOT FMVSS No. 106 and SAE J1402. This red rubber EPDM air line has a blue grip and a working pressure of 225 PSI. It has a male thread of 1/2 NPT and includes a swivel fitting for the tractor-end connection. The hose measures 15 x 3/8 x 3/4 inches.

Consider a fresh hose for your air line system. This hose adheres to standards DOT FMVSS No. 106 and SAE J1402. This red rubber EPDM air line has a blue grip and a working pressure of 225 PSI. It has a male thread of 1/2 NPT and includes a swivel fitting for the tractor-end connection. The hose measures 15 x 3/8 x 3/4 inches.

300 PSI explorer air hose, reference no. 105-16-2, inside diameter 1 in., outside diameter 1-15/32 in.es, maximum WP PSI 300, weight 0.57 foot-lbs.

300 PSI explorer air hose, reference no. 105-16-2, inside diameter 1 in., outside diameter 1-15/32 in.es, maximum WP PSI 300, weight 0.57 foot-lbs.

This push-on hose meets the standards for RMA Class B, has a length of 50 feet, a maximum operating pressure of 300 psi @ 70 Degrees F and is red, has an operating temperature of -40 Degrees to 180 Degrees F and is made of nitrile. In addition, it has ½ inch inside diameter. This push-on hose is for use on air, automatic transmission fluid, diesel fuel, ethylene glycol, fuel oil, gasoline, hydraulic fluid, kerosene, lubricat, and more.

This push-on hose meets the standards for RMA Class B, has a length of 50 feet, a maximum operating pressure of 300 psi @ 70 Degrees F and is red, has an operating temperature of -40 Degrees to 180 Degrees F and is made of nitrile. In addition, it has ½ inch inside diameter. This push-on hose is for use on air, automatic transmission fluid, diesel fuel, ethylene glycol, fuel oil, gasoline, hydraulic fluid, kerosene, lubricat, and more.

This push-on hose meets the standards for RMA Class B, has a length of 50 feet, a maximum operating pressure of 225 psi @ 70 Degrees F and is red, has an operating temperature of -40 Degrees to 180 Degrees F and is made of nitrile. In addition, it has 1¼ inch inside diameter. This push-on hose is for use on air, automatic transmission fluid, diesel fuel, ethylene glycol, fuel oil, gasoline, hydraulic fluid, kerosene, lubricat, and more.

This push-on hose meets the standards for RMA Class B, has a length of 50 feet, a maximum operating pressure of 225 psi @ 70 Degrees F and is red, has an operating temperature of -40 Degrees to 180 Degrees F and is made of nitrile. In addition, it has 1¼ inch inside diameter. This push-on hose is for use on air, automatic transmission fluid, diesel fuel, ethylene glycol, fuel oil, gasoline, hydraulic fluid, kerosene, lubricat, and more.

This push-on hose meets the standards for RMA Class B, has a length of 50 feet, a maximum operating pressure of 300 psi @ 70 Degrees F and is red, has an operating temperature of -40 Degrees to 180 Degrees F and is made of nitrile. In addition, it has ⅜ inch inside diameter. This push-on hose is for use on air, automatic transmission fluid, diesel fuel, ethylene glycol, fuel oil, gasoline, hydraulic fluid, kerosene, lubricat, and more.

This push-on hose meets the standards for RMA Class B, has a length of 50 feet, a maximum operating pressure of 300 psi @ 70 Degrees F and is red, has an operating temperature of -40 Degrees to 180 Degrees F and is made of nitrile. In addition, it has ⅜ inch inside diameter. This push-on hose is for use on air, automatic transmission fluid, diesel fuel, ethylene glycol, fuel oil, gasoline, hydraulic fluid, kerosene, lubricat, and more.

This easy couple hose has a length of 50 feet, a maximum operating pressure of 300 psi @ 70 Degrees F and is black, has an operating temperature of -40 Degrees to 212 Degrees F and is made of neoprene. In addition, it has 1⅜ inch outside diameter, ⅝ inch inside diameter. This easy couple hose is for use on air, automatic transmission fluid, diesel fuel, ethylene glycol, fuel oil, gasoline, hydraulic fluid, and more.

This easy couple hose has a length of 50 feet, a maximum operating pressure of 300 psi @ 70 Degrees F and is black, has an operating temperature of -40 Degrees to 212 Degrees F and is made of neoprene. In addition, it has 1⅜ inch outside diameter, ⅝ inch inside diameter. This easy couple hose is for use on air, automatic transmission fluid, diesel fuel, ethylene glycol, fuel oil, gasoline, hydraulic fluid, and more.

This air hose has a length of 500 feet, a maximum operating pressure of 200 psi @ 70 Degrees F, is red, has an operating temperature of -20.2 Degrees to 210.2 Degrees F and is made of nitrile synthetic rubber. In addition, it has 1 7/16 inch outside diameter, 1 inch inside diameter.

This air hose has a length of 500 feet, a maximum operating pressure of 200 psi @ 70 Degrees F, is red, has an operating temperature of -20.2 Degrees to 210.2 Degrees F and is made of nitrile synthetic rubber. In addition, it has 1 7/16 inch outside diameter, 1 inch inside diameter.