Product ITEM is unavailable. See products from the same category below.
Terminal Blocks
Terminal blocks mount on DIN rails, channels, or panels to distribute power or ground to one or more components within an enclosure. Also known as connection terminals, they help keep wiring circuits tidy inside confined spaces such as electrical panels to make them easily identifiable and accessible for troubleshooting. Their input and output terminals are connected by a busbar within their insulated frame and have mechanical clamps that compress the conductors to hold and splice them. Terminal blocks allow for quick termination and disconnection of wires with the use of a screwdriver.
This terminal block has one pole, and an operating temperature of -40 Degrees F. It measures 0.2 inch W x 1.88 inch L x 1.88 inch depth. This terminal block meets the standards for ATEX, CSA, DNV, EAC, GL, IECEx, LR, UL, VDE. It is grey, and has 26 AWG minimum wire size to 12 AWG maximum wire size.
This terminal block has one pole, and an operating temperature of -40 Degrees F. It measures 0.2 inch W x 1.88 inch L x 1.88 inch depth. This terminal block meets the standards for ATEX, CSA, DNV, EAC, GL, IECEx, LR, UL, VDE. It is grey, and has 26 AWG minimum wire size to 12 AWG maximum wire size.
This electrical terminal block has independent hot feed connections. It has six poles and its terminal links and screws are made of nickel-plated brass. It has numbers eight to 32-thread binding head screws. The insulator base is made from moisture repellent moulded plastic with protective insulator barrier strips. It measures 1.31 x 0.67 inches.
This electrical terminal block has independent hot feed connections. It has six poles and its terminal links and screws are made of nickel-plated brass. It has numbers eight to 32-thread binding head screws. The insulator base is made from moisture repellent moulded plastic with protective insulator barrier strips. It measures 1.31 x 0.67 inches.
This terminal block has one pole, and an operating temperature of -40 Degrees F. It measures 0.2 inch W x 1.88 inch L x 1.88 inch depth. This terminal block meets the standards for ATEX, CSA, CURus, DNV, GL, IECEx, LR, UL, VDE. It is green/yellow, and has 26 AWG minimum wire size to 12 AWG maximum wire size.
This terminal block has one pole, and an operating temperature of -40 Degrees F. It measures 0.2 inch W x 1.88 inch L x 1.88 inch depth. This terminal block meets the standards for ATEX, CSA, CURus, DNV, GL, IECEx, LR, UL, VDE. It is green/yellow, and has 26 AWG minimum wire size to 12 AWG maximum wire size.
This moisture-repellent, moulded plastic electrical terminal block has #10-32 thread stud terminals with hex nuts, lock washers and flat washers. It has four poles and measures 3.18 length x 5/8 width x 27/32 inches height. This unit has two eyelets for mounting screws measuring 3/16 inches. The screws are not included.
This moisture-repellent, moulded plastic electrical terminal block has #10-32 thread stud terminals with hex nuts, lock washers and flat washers. It has four poles and measures 3.18 length x 5/8 width x 27/32 inches height. This unit has two eyelets for mounting screws measuring 3/16 inches. The screws are not included.
This moisture-repellent, moulded plastic electrical terminal block has numbers eight-32 binding head screws and terminal links made of nickel-plated brass. It has four poles and measures 1.31 x 0.67 inches.
This moisture-repellent, moulded plastic electrical terminal block has numbers eight-32 binding head screws and terminal links made of nickel-plated brass. It has four poles and measures 1.31 x 0.67 inches.
This terminal block has one pole, and an operating temperature of -40 Degrees F. It measures 1.72 inch W x 1.82 inch L x 0.35 inch depth. This terminal block meets the standards for CE, CSA, RoHS, UL. It is natural, and has 22 AWG minimum wire size to 8 AWG maximum wire size.
This terminal block has one pole, and an operating temperature of -40 Degrees F. It measures 1.72 inch W x 1.82 inch L x 0.35 inch depth. This terminal block meets the standards for CE, CSA, RoHS, UL. It is natural, and has 22 AWG minimum wire size to 8 AWG maximum wire size.
This electric terminal block has numbers eight to 32-thread stud terminals that include hex nuts. It has 10 poles, common hot feed connections, and two 1/4-inch to 20 studs made of brass. It has a solid bus bar made of brass and numbers 8 to 32 round head screws for circuit connectors. It has 36 volts, 50 amps, and its insulator base is made of moisture-resistant moulded plastic. it measures 1 1/4 x 1 1/32 inches.
This electric terminal block has numbers eight to 32-thread stud terminals that include hex nuts. It has 10 poles, common hot feed connections, and two 1/4-inch to 20 studs made of brass. It has a solid bus bar made of brass and numbers 8 to 32 round head screws for circuit connectors. It has 36 volts, 50 amps, and its insulator base is made of moisture-resistant moulded plastic. it measures 1 1/4 x 1 1/32 inches.
This circuit protector has one pole. It measures 0.5 inch W x 3.11 inch L x 3.15 inch depth. This circuit protector meets the standards for CSA C22.2 No 235DIN 57470UL 1077. It is black, and has 16 AWG minimum wire size to 10 AWG maximum wire size.
This circuit protector has one pole. It measures 0.5 inch W x 3.11 inch L x 3.15 inch depth. This circuit protector meets the standards for CSA C22.2 No 235DIN 57470UL 1077. It is black, and has 16 AWG minimum wire size to 10 AWG maximum wire size.
This circuit protector has one pole. It measures 0.5 inch W x 3.11 inch L x 3.15 inch depth. This circuit protector meets the standards for DIN 57470UL 1077CSA C22.2 No 235. It is black, and has 16 AWG minimum wire size to 10 AWG maximum wire size.
This circuit protector has one pole. It measures 0.5 inch W x 3.11 inch L x 3.15 inch depth. This circuit protector meets the standards for DIN 57470UL 1077CSA C22.2 No 235. It is black, and has 16 AWG minimum wire size to 10 AWG maximum wire size.
This circuit protector has one pole. It measures 0.5 inch W x 3.11 inch L x 3.15 inch depth. This circuit protector meets the standards for CSA C22.2 No 235UL 1077DIN 57470. It is black, and has 16 AWG minimum wire size to 10 AWG maximum wire size.
This circuit protector has one pole. It measures 0.5 inch W x 3.11 inch L x 3.15 inch depth. This circuit protector meets the standards for CSA C22.2 No 235UL 1077DIN 57470. It is black, and has 16 AWG minimum wire size to 10 AWG maximum wire size.
This terminal block has one pole, and an operating temperature of -40 Degrees F. It measures 3.32 inch W x 2.34 inch L x 1.17 inch depth. This terminal block meets the standards for CE, CSA, RoHS, UL. It is natural, and has 6 AWG minimum wire size to 250 kcmil maximum wire size.
This terminal block has one pole, and an operating temperature of -40 Degrees F. It measures 3.32 inch W x 2.34 inch L x 1.17 inch depth. This terminal block meets the standards for CE, CSA, RoHS, UL. It is natural, and has 6 AWG minimum wire size to 250 kcmil maximum wire size.
This terminal block has one pole, and an operating temperature of -40 Degrees F. It measures 2.12 inch W x 2.71 inch L x 0.7 inch depth. This terminal block meets the standards for CE, CSA, RoHS, UL. It is natural, and has 12 AWG minimum wire size to 1/0 AWG maximum wire size.
This terminal block has one pole, and an operating temperature of -40 Degrees F. It measures 2.12 inch W x 2.71 inch L x 0.7 inch depth. This terminal block meets the standards for CE, CSA, RoHS, UL. It is natural, and has 12 AWG minimum wire size to 1/0 AWG maximum wire size.
This terminal block has one pole, and an operating temperature of -40 Degrees F. It measures 1.8 inch W x 1.48 inch L x 0.37 inch depth. This terminal block meets the standards for CE, CSA, RoHS, UL. It is natural, and has 22 AWG minimum wire size to 12 AWG maximum wire size.
This terminal block has one pole, and an operating temperature of -40 Degrees F. It measures 1.8 inch W x 1.48 inch L x 0.37 inch depth. This terminal block meets the standards for CE, CSA, RoHS, UL. It is natural, and has 22 AWG minimum wire size to 12 AWG maximum wire size.
This circuit protector has one pole. It measures 0.5 inch W x 3.11 inch L x 3.15 inch depth. This circuit protector meets the standards for UL 1077CSA C22.2 No 235DIN 57470. It is black, and has 16 AWG minimum wire size to 10 AWG maximum wire size.
This circuit protector has one pole. It measures 0.5 inch W x 3.11 inch L x 3.15 inch depth. This circuit protector meets the standards for UL 1077CSA C22.2 No 235DIN 57470. It is black, and has 16 AWG minimum wire size to 10 AWG maximum wire size.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
