Stainless Steel Stick Welding Electrodes

This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 18 inches in length with a 3/16-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.

This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 18 inches in length with a 3/16-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.

This MNR Builder MN electrode has a DC+ or AC welding polarity and is made of manganese alloy for heavy impact resistant build-up prior to hardfacing. It is 14 inches in length with an 1/8-inch diameter, and available in a five-kilogram package.

This MNR Builder MN electrode has a DC+ or AC welding polarity and is made of manganese alloy for heavy impact resistant build-up prior to hardfacing. It is 14 inches in length with an 1/8-inch diameter, and available in a five-kilogram package.

This MNR Builder MN electrode has a DC+ or AC welding polarity and is made of manganese alloy for heavy impact resistant build-up prior to hardfacing. It is 14 inches in length with a 5/32-inch diameter, and available in a five-kilogram package.

This MNR Builder MN electrode has a DC+ or AC welding polarity and is made of manganese alloy for heavy impact resistant build-up prior to hardfacing. It is 14 inches in length with a 5/32-inch diameter, and available in a five-kilogram package.

This MNR X-Treme, DC + AC, specialty welding electrode is made of high alloy steel with a minimum tensile strength of 130,000 PSI for exceptional strength and crack resistance. It is ideal for applications from broken bolt removal to welding "unknown" steel, and recommended for underlay and hardfacing of worn parts. It is 14 inches long with a 5/32-inch diameter and a 32% elongation. Available in a five-kilogram package.

This MNR X-Treme, DC + AC, specialty welding electrode is made of high alloy steel with a minimum tensile strength of 130,000 PSI for exceptional strength and crack resistance. It is ideal for applications from broken bolt removal to welding "unknown" steel, and recommended for underlay and hardfacing of worn parts. It is 14 inches long with a 5/32-inch diameter and a 32% elongation. Available in a five-kilogram package.

This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 18 inches in length with a 5/32-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.

This LA 7018 mild-steel electrode is a basic low hydrogen, all-position electrode (E7018-1) used on either DC or AC current. It can obtain code quality welds on higher strength steels with weld-metal toughness properties (charpy impacts) down to -46 Degrees C (-50 Degrees F), when coupled with a low hydrogen weld deposit. It is 18 inches in length with a 5/32-inch diameter, and meets CSA, Class E4918-1-H4 standards. Available in a five-kilogram package.

This LA Ultra 11 electrode is made of mild steel. In addition, it is designed for use with the following materials: steel. It has an overall length of 12 inches, an overall diameter of 3/32 inches, and weighs 5½ pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS E6011, CWB E4311.

This LA Ultra 11 electrode is made of mild steel. In addition, it is designed for use with the following materials: steel. It has an overall length of 12 inches, an overall diameter of 3/32 inches, and weighs 5½ pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS E6011, CWB E4311.

This MNR 4 X 4 specialty welding electrode measures 12 inches long with a 3/32-inch diameter, and is used for general maintenance and off-road, adverse-condition 4 x 4-inch welding. It is DC +/- AC, made of mild steel, and has a minimum tensile strength of 80,000 PSI. Available in a 0.45-kilogram package.

This MNR 4 X 4 specialty welding electrode measures 12 inches long with a 3/32-inch diameter, and is used for general maintenance and off-road, adverse-condition 4 x 4-inch welding. It is DC +/- AC, made of mild steel, and has a minimum tensile strength of 80,000 PSI. Available in a 0.45-kilogram package.

Cette électrode de soudage spécialisée MNR 4 X 4 mesure 12 po L. a/dia. de 3/32 po et est utilisée p/ l'entretien général et le soudage hors route de 4 x 4 po dans des conditions défavorables. Elle est CC +/- CA, fabriquée en AC doux et a une tension de traction min. de 80 000lb/po² Disponible dans un emballage de 5 kg.

Cette électrode de soudage spécialisée MNR 4 X 4 mesure 12 po L. a/dia. de 3/32 po et est utilisée p/ l'entretien général et le soudage hors route de 4 x 4 po dans des conditions défavorables. Elle est CC +/- CA, fabriquée en AC doux et a une tension de traction min. de 80 000lb/po² Disponible dans un emballage de 5 kg.

Cette électrode de soudage spéciale MNR X-Treme, CC + CA, est en AC fortement allié a/une tension de traction min. de 130 000lb/po² p/ une résistance exceptionnelle et une résistance aux fissures. Elle est idéale p/ les applications allant de l'enlèvement de boulons cassés au soudage d'AC poinconnupo, et recommandé p/ la sous-couche et le rechargement dur des pièces usées. Elle mesure 12 po L. a/dia. de 3/32 po et un allongement de 32%. Disponible dans un emballage de 0,45 kg.

Cette électrode de soudage spéciale MNR X-Treme, CC + CA, est en AC fortement allié a/une tension de traction min. de 130 000lb/po² p/ une résistance exceptionnelle et une résistance aux fissures. Elle est idéale p/ les applications allant de l'enlèvement de boulons cassés au soudage d'AC poinconnupo, et recommandé p/ la sous-couche et le rechargement dur des pièces usées. Elle mesure 12 po L. a/dia. de 3/32 po et un allongement de 32%. Disponible dans un emballage de 0,45 kg.

Cette électrode de soudage spécialisée MNR 4 X 4 mesure 14 po L. a/dia. de 1/8 po et est utilisée p/ l'entretien général et le soudage hors route de 4 x 4 po dans des conditions défavorables. Elle est CC +/- CA, fabriquée en AC doux et a une tension de traction min. de 80 000lb/po² Disponible dans un emballage de 0,45 kg.

Cette électrode de soudage spécialisée MNR 4 X 4 mesure 14 po L. a/dia. de 1/8 po et est utilisée p/ l'entretien général et le soudage hors route de 4 x 4 po dans des conditions défavorables. Elle est CC +/- CA, fabriquée en AC doux et a une tension de traction min. de 80 000lb/po² Disponible dans un emballage de 0,45 kg.

Cette électrode Hard60 a une longueur de 14po, un diamètre de 5/32po et un poids de 11lb. Elle est destinée au soudage à électrode enrobée (SMAW), y compris dans des positions plates/horizontales.

Cette électrode Hard60 a une longueur de 14po, un diamètre de 5/32po et un poids de 11lb. Elle est destinée au soudage à électrode enrobée (SMAW), y compris dans des positions plates/horizontales.

Cette électrode de soudage spécialisée MNR 4 X 4 mesure 14 po L. a/dia. de 5/32 po et est utilisée p/ l'entretien général et le soudage hors route de 4 x 4 po dans des conditions défavorables. Elle est CC +/- CA, fabriquée en AC doux et a une tension de traction min. de 80 000lb/po² Disponible dans un emballage de 5 kg.

Cette électrode de soudage spécialisée MNR 4 X 4 mesure 14 po L. a/dia. de 5/32 po et est utilisée p/ l'entretien général et le soudage hors route de 4 x 4 po dans des conditions défavorables. Elle est CC +/- CA, fabriquée en AC doux et a une tension de traction min. de 80 000lb/po² Disponible dans un emballage de 5 kg.

This MNR Cast 55, DC + AC, specialty welding electrode is made of 55% nickel cast iron with 60% increased nickel content for crack resistance and maximum machinability. It is "barium free" for joining dirty and contaminated cast irons, and welds a wide variety of ductile, nodular, and malleable cast irons. It is 12 inches long with a 3/32-inch diameter, and has a minimum tensile strength of 50,000 PSI. Available in a five-kilogram package.

This MNR Cast 55, DC + AC, specialty welding electrode is made of 55% nickel cast iron with 60% increased nickel content for crack resistance and maximum machinability. It is "barium free" for joining dirty and contaminated cast irons, and welds a wide variety of ductile, nodular, and malleable cast irons. It is 12 inches long with a 3/32-inch diameter, and has a minimum tensile strength of 50,000 PSI. Available in a five-kilogram package.

This MNR X-Treme, DC + AC, specialty welding electrode is made of high alloy steel with a minimum tensile strength of 130,000 PSI for exceptional strength and crack resistance. It is ideal for applications from broken bolt removal to welding "unknown" steel, and recommended for underlay and hardfacing of worn parts. It is 14 inches long with an 1/8-inch diameter and a 32% elongation. Available in a 0.45-kilogram package.

This MNR X-Treme, DC + AC, specialty welding electrode is made of high alloy steel with a minimum tensile strength of 130,000 PSI for exceptional strength and crack resistance. It is ideal for applications from broken bolt removal to welding "unknown" steel, and recommended for underlay and hardfacing of worn parts. It is 14 inches long with an 1/8-inch diameter and a 32% elongation. Available in a 0.45-kilogram package.

This MNR X-Treme, DC + AC, specialty welding electrode is made of high alloy steel with a minimum tensile strength of 130,000 PSI for exceptional strength and crack resistance. It is ideal for applications from broken bolt removal to welding "unknown" steel, and recommended for underlay and hardfacing of worn parts. It is 12 inches long with a 3/32-inch diameter and a 32% elongation. Available in a five-kilogram package.

This MNR X-Treme, DC + AC, specialty welding electrode is made of high alloy steel with a minimum tensile strength of 130,000 PSI for exceptional strength and crack resistance. It is ideal for applications from broken bolt removal to welding "unknown" steel, and recommended for underlay and hardfacing of worn parts. It is 12 inches long with a 3/32-inch diameter and a 32% elongation. Available in a five-kilogram package.

Use this MNR Universal mild-steel electrode for all-round repairs and general fabrication. It has a fast-freezing slag system for maximum positional operability and is ideal for high-speed welding on thin-gauge, clean, or new steel components. It is DC +/- AC, 14 inches long with a 5/32-inch diameter, and has a minimum tensile strength of 75,000 PSI. Available in a five-kilogram package.

Use this MNR Universal mild-steel electrode for all-round repairs and general fabrication. It has a fast-freezing slag system for maximum positional operability and is ideal for high-speed welding on thin-gauge, clean, or new steel components. It is DC +/- AC, 14 inches long with a 5/32-inch diameter, and has a minimum tensile strength of 75,000 PSI. Available in a five-kilogram package.