Product ITEM is unavailable. See products from the same category below.
Ratcheting Combination Wrenches
Ratcheting combination wrenches have a box end design on one end of the handle with a gear mechanism that allows the wrench to rotate freely in one direction without removing the wrench head from the fastener and repositioning the wrench. The box end fits around and grips the entire head of the fastener for more contact than an open end wrench and can apply more torque since the box end is less likely to slip off the fastener compared to an open end design. The opposite end of the wrench has an open end design that allows top and side access to the fastener while the box end can only access a fastener from the top.
This combination fixed head multigear wrench has a length of 6½ inch, plus it weighs 0.16 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a SAE measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination fixed head multigear wrench has a length of 6½ inch, plus it weighs 0.16 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a SAE measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 211 mm, plus it weighs 0.43 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 211 mm, plus it weighs 0.43 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 8 5/16 inch, plus it weighs 0.45 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a SAE measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 8 5/16 inch, plus it weighs 0.45 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a SAE measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 8 21/32 inch, plus it weighs 0.45 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a SAE measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 8 21/32 inch, plus it weighs 0.45 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a SAE measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination fixed head multigear wrench has a length of 157 mm, plus it weighs 0.13 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination fixed head multigear wrench has a length of 157 mm, plus it weighs 0.13 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 220 mm, plus it weighs 0.47 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 220 mm, plus it weighs 0.47 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination fixed head multigear wrench has a length of 182 mm, plus it weighs 0.20 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination fixed head multigear wrench has a length of 182 mm, plus it weighs 0.20 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination fixed head multigear wrench has a length of 8⅞ inch, plus it weighs 0.39 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a SAE measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination fixed head multigear wrench has a length of 8⅞ inch, plus it weighs 0.39 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a SAE measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 187 mm, plus it weighs 0.20 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 187 mm, plus it weighs 0.20 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 7⅜ inch, plus it weighs 0.26 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a SAE measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 7⅜ inch, plus it weighs 0.26 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a SAE measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination fixed head multigear wrench has a length of 165 mm, plus it weighs 0.16 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination fixed head multigear wrench has a length of 165 mm, plus it weighs 0.16 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination fixed head multigear wrench has a length of 202 mm, plus it weighs 0.28 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination fixed head multigear wrench has a length of 202 mm, plus it weighs 0.28 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination fixed head multigear wrench has a length of 216 mm, plus it weighs 0.37 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination fixed head multigear wrench has a length of 216 mm, plus it weighs 0.37 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 158 mm, plus it weighs 0.16 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 158 mm, plus it weighs 0.16 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 235 mm, plus it weighs 0.59 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination flex head multigear wrench has a length of 235 mm, plus it weighs 0.59 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a metric measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination fixed head multigear wrench has a length of 8½ inch, plus it weighs 0.37 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a SAE measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
This combination fixed head multigear wrench has a length of 8½ inch, plus it weighs 0.37 pounds and is not insulated. The handle is silver and has a one-piece style/type. It meets the standards for ANSI B107.9M, CDA 39-GP-11b, Type 3 Style A, GGG-W-636 Type 4. In addition, it is made of stainless steel, has a SAE measurement type, is corrosion-resistant, is not non-magnetic, and is not tether capable.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
