Potable Water & Food Processing Push-to-Connect Tube Fittings

This bulkhead union elbow fitting can be used for 45 degrees tube to tube connections.

This bulkhead union elbow fitting can be used for 45 degrees tube to tube connections.

This stainless steel union tube has a 5/16 inch 37 Degrees JIC flare into 1/2"-20 thread UN/UNF-2A pipe thread on one end and a 1/4 inch 37 Degrees JIC flare into 7/16-20 thread UN/UNF-2A pipe thread at the other end. In hydraulic fluid environments, matching pipe fitting part number 5-4 HTX.

This stainless steel union tube has a 5/16 inch 37 Degrees JIC flare into 1/2"-20 thread UN/UNF-2A pipe thread on one end and a 1/4 inch 37 Degrees JIC flare into 7/16-20 thread UN/UNF-2A pipe thread at the other end. In hydraulic fluid environments, matching pipe fitting part number 5-4 HTX.

This union tee nut has a Swivel connection type.

This union tee nut has a Swivel connection type.

Use this union to connect fittings with the same thread size.

Use this union to connect fittings with the same thread size.

This bulkhead union has a straight bulkhead fitting shape and can withstand 4000 psi. It is Chromium-6 free.

This bulkhead union has a straight bulkhead fitting shape and can withstand 4000 psi. It is Chromium-6 free.

This pipe fitting and port adapter meets the standards for ASTM B117/ISO 9227, ISO 6149, SAE, has a length of 38.2 mm, a maximum operating pressure of 7,500 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating has a 27 mm hex size.

This pipe fitting and port adapter meets the standards for ASTM B117/ISO 9227, ISO 6149, SAE, has a length of 38.2 mm, a maximum operating pressure of 7,500 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating has a 27 mm hex size.

This union tee nut has a Swivel connection type.

This union tee nut has a Swivel connection type.

This is a British Standard Pipe Parallel (BSPP) union for use when connecting two components with the same thread size.

This is a British Standard Pipe Parallel (BSPP) union for use when connecting two components with the same thread size.

This union tee fitting is suitable for quickly connecting tubes and pipes of the same size.

This union tee fitting is suitable for quickly connecting tubes and pipes of the same size.

This straight union meets the standards for FDA, NSF/ANSI 51, NSF/ANSI 61, has a length of 1 3/16 inch, a maximum operating pressure of 230 psi and is designed for the following applications: beverages, carbon dioxide, food processing, potable water, vacuum. It is white, has an operating temperature of 35 Degrees F to 200 Degrees F and is resistant to chemical, mechanical and is made of nylon. In addition, it is a straight connector, with an imperial system of measurement.

This straight union meets the standards for FDA, NSF/ANSI 51, NSF/ANSI 61, has a length of 1 3/16 inch, a maximum operating pressure of 230 psi and is designed for the following applications: beverages, carbon dioxide, food processing, potable water, vacuum. It is white, has an operating temperature of 35 Degrees F to 200 Degrees F and is resistant to chemical, mechanical and is made of nylon. In addition, it is a straight connector, with an imperial system of measurement.

This bspp tee has a maximum operating pressure of 5,000 psi @ 70 Degrees F and is made of steel. In addition, it has ¼"-19 thread. Plus, it has a BSPP x BSPP x BSPP connection type.

This bspp tee has a maximum operating pressure of 5,000 psi @ 70 Degrees F and is made of steel. In addition, it has ¼"-19 thread. Plus, it has a BSPP x BSPP x BSPP connection type.

This hydraulic hose adapter swivel fitting has a 90 elbow shape and a thread size of ⅞"-14 and is a male-to-male connection style. It is made from carbon steel with a Chromium-6 free, zinc trivalent chromate finish. This union flare ends adapter has a maximum working pressure of 3000 psi.

This hydraulic hose adapter swivel fitting has a 90 elbow shape and a thread size of ⅞"-14 and is a male-to-male connection style. It is made from carbon steel with a Chromium-6 free, zinc trivalent chromate finish. This union flare ends adapter has a maximum working pressure of 3000 psi.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a length of 2.75 inch, a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion and is made of steel. In addition, it has a ⅞"-14 thread. Plus, it has a 1⅛ inch hex size.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a length of 2.75 inch, a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion and is made of steel. In addition, it has a ⅞"-14 thread. Plus, it has a 1⅛ inch hex size.

This 24 Degrees flareless fitting meets the standards for SAE J514, has a maximum operating pressure of 6,000 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating has a 11/16 inch hex size.

This 24 Degrees flareless fitting meets the standards for SAE J514, has a maximum operating pressure of 6,000 psi and is designed for the following applications: hydraulic fluid and gas handling connections. It is made of steel with a Toughshield Plus plating finish/coating has a 11/16 inch hex size.

This male K4 union is suitable for connecting tube or pipes with the same thread size.

This male K4 union is suitable for connecting tube or pipes with the same thread size.

This union tee nut has a Swivel connection type.

This union tee nut has a Swivel connection type.