Includes Spanner BushingIndicates whether a wheel has a spanner bushing that provides a smooth inner raceway for wheel bearings and prevents the wheel from rubbing against the caster frame.
Non-markingNon-marking indicates that the wheel is made from a material that will not scuff and leave marks on the surface it is rolling on. This does not indicate whether the wheel will damage the surface it is rolling on.
StandardStandard tread allows more surface area of the tread to make contact with the floor surface than other styles of wheel tread, which allows the wheel to have a higher load capacity than wheels with a more rounded tread.
Wheel DiameterDiameter is the distance through the centre of the wheel from one edge to the other. Wheels with a smaller diameter are suitable for indoor applications, while larger diameter wheels are suitable for outdoor terrain.
Suggested results for "SUGGEST-ITEM"
Product ITEM is unavailable. See products from the same category below.
Plastic & Phenolic Tread Standard Wheels
These wheels have plastic or phenolic treads that resist corrosion. The wheels' hard treads provide smooth rolling and good maneuverability and are less damaging to floors than wheels with metal treads. Plastic and phenolic tread wheels are used on carts, racks, and similar equipment in a range of institutional and industrial applications.
This rigid caster has a 900 lb capacity and is great for most general medium- to heavy-duty industrial applications. The top plate is 1/4" carbon steel, heat-treated for extra strength. The legs are welded to the plate. Zinc plating provides a corrosion-resistant finish, and the wheel is polyurethane with a crown tread.
This rigid caster has a 900 lb capacity and is great for most general medium- to heavy-duty industrial applications. The top plate is 1/4" carbon steel, heat-treated for extra strength. The legs are welded to the plate. Zinc plating provides a corrosion-resistant finish, and the wheel is polyurethane with a crown tread.
This brown caster wheel from Faultless is designed for air cargo uses. It has a wheel diameter of 3 inches and a 1-5/16 width, and a load capacity of 270 lbs. It has a fully sealed raceway for low maintenance and protection of the swivel head outdoors, and the top plate is diamond-shaped with a corrosion-resistant zinc dichromate finish.
This brown caster wheel from Faultless is designed for air cargo uses. It has a wheel diameter of 3 inches and a 1-5/16 width, and a load capacity of 270 lbs. It has a fully sealed raceway for low maintenance and protection of the swivel head outdoors, and the top plate is diamond-shaped with a corrosion-resistant zinc dichromate finish.
This caster wheel is a popular choice as a replacement part for lighter industrial applications, thanks to its 300-lb capacity. The 4-inch diameter, 1 1/4-inch width wheel is made from polypropylene and swivels to make moving the item easier. It is durable and sturdy, having been built to withstand considerable use.
This caster wheel is a popular choice as a replacement part for lighter industrial applications, thanks to its 300-lb capacity. The 4-inch diameter, 1 1/4-inch width wheel is made from polypropylene and swivels to make moving the item easier. It is durable and sturdy, having been built to withstand considerable use.
The thermoplastic rubber used for this 3 1/2 inch diameter wheel makes it a smooth roller, yet allows it to withstand considerable use and wear. With a 225 lb load rating, this caster is perfect for use on lighter capacity items. It also swivels for ease of use and movement.
The thermoplastic rubber used for this 3 1/2 inch diameter wheel makes it a smooth roller, yet allows it to withstand considerable use and wear. With a 225 lb load rating, this caster is perfect for use on lighter capacity items. It also swivels for ease of use and movement.
A 2 1/2 inch width x 10-inch diameter centred pneumatic black wheel with a 5/8 inch bore and ball bearing. With a 550 lb load rating, the Duraflex solid cushion tire is made from a blend of granular rubber & chemical accelerators, mounted on a polypropylene centre, and cured under pressure. It is impact-resistant and puncture-proof. The durometer rating is 80A.
A 2 1/2 inch width x 10-inch diameter centred pneumatic black wheel with a 5/8 inch bore and ball bearing. With a 550 lb load rating, the Duraflex solid cushion tire is made from a blend of granular rubber & chemical accelerators, mounted on a polypropylene centre, and cured under pressure. It is impact-resistant and puncture-proof. The durometer rating is 80A.
This Faultless rigid caster with a Delrin bearing has a wheel size of five inches by 1 1/4 inches. Made from Dyna-Tred thermoplastic rubber, it is strong and sturdy but still allows for ease of use and a smooth roll. This caster has a load capacity of 300 lbs.
This Faultless rigid caster with a Delrin bearing has a wheel size of five inches by 1 1/4 inches. Made from Dyna-Tred thermoplastic rubber, it is strong and sturdy but still allows for ease of use and a smooth roll. This caster has a load capacity of 300 lbs.
With a 225 load rating, this Faultless three-inch diameter caster wheel is good for light to medium applications. The wheel is made from polyurethane which allows it to be quiet and non-marking while also being strong and durable. It is built to a high standard, can withstand considerable use, and swivels for movement ease.
With a 225 load rating, this Faultless three-inch diameter caster wheel is good for light to medium applications. The wheel is made from polyurethane which allows it to be quiet and non-marking while also being strong and durable. It is built to a high standard, can withstand considerable use, and swivels for movement ease.
This swivel wheel has a zinc-covered steel top plate and phenolic wheel with a 5-inch diameter and 2-inch width. It is good for medium to heavy-duty uses with a 900 lb capacity, and it gives a smooth roll over a variety of surfaces. It has been heat-treated for added strength and has a mounting height of 6.5 inches.
This swivel wheel has a zinc-covered steel top plate and phenolic wheel with a 5-inch diameter and 2-inch width. It is good for medium to heavy-duty uses with a 900 lb capacity, and it gives a smooth roll over a variety of surfaces. It has been heat-treated for added strength and has a mounting height of 6.5 inches.
This Faultless caster wheel is great for lighter applications thanks to its 125 lb load rating. Made from Dyna-Tred thermoplastic rubber, the five-inch diameter wheel is designed not to dent, fade, or stain and still provide a smooth roll. This product also has a plain bearing, and it swivels for ease of movement.
This Faultless caster wheel is great for lighter applications thanks to its 125 lb load rating. Made from Dyna-Tred thermoplastic rubber, the five-inch diameter wheel is designed not to dent, fade, or stain and still provide a smooth roll. This product also has a plain bearing, and it swivels for ease of movement.
If you're dealing with excessive load weights and floor protection is not a factor, this wheel is a great choice. The cast iron and forged steel are suitable for high capacity, abusive applications, and the phenolic material gives resistance to oil, gasoline, and even dilute acids. The wheel has a 6-inch diameter, 3-inch width, and a 2500 lb capacity.
If you're dealing with excessive load weights and floor protection is not a factor, this wheel is a great choice. The cast iron and forged steel are suitable for high capacity, abusive applications, and the phenolic material gives resistance to oil, gasoline, and even dilute acids. The wheel has a 6-inch diameter, 3-inch width, and a 2500 lb capacity.
This wheel with a 5-inch diameter and two-inch width is a sturdy and reliable replacement part for many general use applications. Though it does not have a bearing, it does offer a smooth and easy ride when fitted.
This wheel with a 5-inch diameter and two-inch width is a sturdy and reliable replacement part for many general use applications. Though it does not have a bearing, it does offer a smooth and easy ride when fitted.
This caster with brake has a zinc finish and a four-inch diameter X two-inch width Dyna-Tred TPR wheel. It has a load rating of 80 lb, making it suitable for furniture and equipment. Double ball bearing construction offers easy swivelling, and the friction-grip stem can fit directly into cast aluminum, moulded plastic, or pressed-steel chair bases.
This caster with brake has a zinc finish and a four-inch diameter X two-inch width Dyna-Tred TPR wheel. It has a load rating of 80 lb, making it suitable for furniture and equipment. Double ball bearing construction offers easy swivelling, and the friction-grip stem can fit directly into cast aluminum, moulded plastic, or pressed-steel chair bases.
The polyurethane material of this 3-inch diameter replacement caster wheel makes for a sturdy and long-lasting product. With a 225-lb load rating, it is suitable for light to medium weight general applications, and it also swivels for ease of movement.
The polyurethane material of this 3-inch diameter replacement caster wheel makes for a sturdy and long-lasting product. With a 225-lb load rating, it is suitable for light to medium weight general applications, and it also swivels for ease of movement.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
