Pipe Thread Sealants

This white, PTFE pipe thread tape provides a resistant seal on pipe threads for many applications and withstands steam, salt, water, fuels, air, refrigerants, solvents, acids, and gases. It measures 520 inches in length, 1/2 inch wide, and is 3 mil thick. Its density is 0.36 g/cu cm, sealing temperature is -450 Degrees F to 550 Degrees F, and its maximum liquid pressure is 2,000 PSI.

This white, PTFE pipe thread tape provides a resistant seal on pipe threads for many applications and withstands steam, salt, water, fuels, air, refrigerants, solvents, acids, and gases. It measures 520 inches in length, 1/2 inch wide, and is 3 mil thick. Its density is 0.36 g/cu cm, sealing temperature is -450 Degrees F to 550 Degrees F, and its maximum liquid pressure is 2,000 PSI.

This pipetite paste is grey in colour and comes in a four ounce brush-top bottle. It meets the standards for CSA. These continuous rolls of gasket-making tape can be cut to the length needed to replace a precut gasket on a flanged joint. They are made of PTFE (polytetrafluoroethylene) which resists heat, chemicals, and friction.

This pipetite paste is grey in colour and comes in a four ounce brush-top bottle. It meets the standards for CSA. These continuous rolls of gasket-making tape can be cut to the length needed to replace a precut gasket on a flanged joint. They are made of PTFE (polytetrafluoroethylene) which resists heat, chemicals, and friction.

Pipe thread sealant tape wraps around pipe threads to ease assembly and seal the connection against leaks. This tape is made of PTFE (polytetrafluorethylene) which provides lubrication for tightening and loosening. The higher the tape density the greater the sealing power.

Pipe thread sealant tape wraps around pipe threads to ease assembly and seal the connection against leaks. This tape is made of PTFE (polytetrafluorethylene) which provides lubrication for tightening and loosening. The higher the tape density the greater the sealing power.

Use this roll of white, PTFE, pipe thread tape for a resistant seal on pipe threads for many applications. It can withstand steam, water, air, salt, fuels, refrigerants, solvents, gases, and acids. It has a density of 0.36 g/cu cm, maximum liquid pressure of 2,000 PSI, and a sealing temperature of -450 Degrees F to 550 Degrees F. It measures 520 inches long, one inch wide, and is 3 mil thick.

Use this roll of white, PTFE, pipe thread tape for a resistant seal on pipe threads for many applications. It can withstand steam, water, air, salt, fuels, refrigerants, solvents, gases, and acids. It has a density of 0.36 g/cu cm, maximum liquid pressure of 2,000 PSI, and a sealing temperature of -450 Degrees F to 550 Degrees F. It measures 520 inches long, one inch wide, and is 3 mil thick.

This pipetite-stik pipe thread sealant is white and comes in a 1.three ounce stick. It meets the standards for NSF, UL Listed, and UPC.

This pipetite-stik pipe thread sealant is white and comes in a 1.three ounce stick. It meets the standards for NSF, UL Listed, and UPC.

This slic-tite pipe thread sealant is white and comes in a 9.6 fluid ounce brush-top can. It meets the standards for CSA Certified, FBC, NSF, UL Listed, and UPC.

This slic-tite pipe thread sealant is white and comes in a 9.6 fluid ounce brush-top can. It meets the standards for CSA Certified, FBC, NSF, UL Listed, and UPC.