Oxy-Fuel Torch Kits

This standard commando tip drill kit contains 12 high carbon steel drills in assorted popular sizes that range from 49 to 75, and a single and end chuck. There is room for many more drills in the case if needed.

This standard commando tip drill kit contains 12 high carbon steel drills in assorted popular sizes that range from 49 to 75, and a single and end chuck. There is room for many more drills in the case if needed.

This Medalist 350 Classic cutting welding outfit includes built-in check valves and flashback arrestors. In addition, it is designed for applications including industrial and general fabrication, light fabrication, repair and maintenance, structural steel fabrication. It meets the standards for UL listed.

This Medalist 350 Classic cutting welding outfit includes built-in check valves and flashback arrestors. In addition, it is designed for applications including industrial and general fabrication, light fabrication, repair and maintenance, structural steel fabrication. It meets the standards for UL listed.

The welding cutting outfit cuts up to 8 inches, has a head angle of 90 degrees and is used for acetylene-oxygen use. It also has a 2460+ cutting attachment and 315FC+ torch handle.

The welding cutting outfit cuts up to 8 inches, has a head angle of 90 degrees and is used for acetylene-oxygen use. It also has a 2460+ cutting attachment and 315FC+ torch handle.

This gas welding outfit includes a cutting tip, tip cleaner, striker, goggles, hose, welding nozzle, and heating nozzle. The 90-degree outfit cuts up to six inches and welds up to 1/4 inches. This product requires the use of propylene and propane and has a CA1350 cutting attachment.

This gas welding outfit includes a cutting tip, tip cleaner, striker, goggles, hose, welding nozzle, and heating nozzle. The 90-degree outfit cuts up to six inches and welds up to 1/4 inches. This product requires the use of propylene and propane and has a CA1350 cutting attachment.

12-piece oxyacetylene outfit packed in its own Wurk Box(TM), including a welding torch, tip mix, cutting attachment, welding tip, cutting tip, oxygen regulator, acetylene regulator, 12-1/2 ft twin hose set, goggles, tip cleaner set, flint striker, gloves and Wurk tool box with tray.

12-piece oxyacetylene outfit packed in its own Wurk Box(TM), including a welding torch, tip mix, cutting attachment, welding tip, cutting tip, oxygen regulator, acetylene regulator, 12-1/2 ft twin hose set, goggles, tip cleaner set, flint striker, gloves and Wurk tool box with tray.

Ameriflame(R) Hot Stuff(TM) cutting & welding outfit. Includes: regulators, cutting attachment, welding torch, cutting and welding tips, oxy/fuel hose set, check valves, flashback arrestors, welding goggles, flint lighter, tip saver set and instructions.

Ameriflame(R) Hot Stuff(TM) cutting & welding outfit. Includes: regulators, cutting attachment, welding torch, cutting and welding tips, oxy/fuel hose set, check valves, flashback arrestors, welding goggles, flint lighter, tip saver set and instructions.

Track for the VCM 200 Series portable cutting machine. Straight line cutting for a variety of welding operations. Torch not included.

Track for the VCM 200 Series portable cutting machine. Straight line cutting for a variety of welding operations. Torch not included.

This welding and cutting outfit has a 90-degree head angle and is designed for acetylene and oxygen use. It includes a spark lighter, goggles, Wypo Set, Grade T dual hose, acetylene regulator, oxygen regulator, cutting tip, and four heating nozzles. This product cuts up to 3/4 inches and welds up to 1/2 inches. It also has a 2460+ cutting attachment and 315FC+ torch handle.

This welding and cutting outfit has a 90-degree head angle and is designed for acetylene and oxygen use. It includes a spark lighter, goggles, Wypo Set, Grade T dual hose, acetylene regulator, oxygen regulator, cutting tip, and four heating nozzles. This product cuts up to 3/4 inches and welds up to 1/2 inches. It also has a 2460+ cutting attachment and 315FC+ torch handle.

Bottom mount, brass, 2 inch, PSI/kPa, 1/4 inch NPT, 3000 PSI, UL listed pressure calibration, replacement gauge and lens for use with non-corrosive gas, for stem mounting, with compressed gas regulators.

Bottom mount, brass, 2 inch, PSI/kPa, 1/4 inch NPT, 3000 PSI, UL listed pressure calibration, replacement gauge and lens for use with non-corrosive gas, for stem mounting, with compressed gas regulators.

This circle wiz is designed for applications including saddle cuts, threadolets, weldolets.

This circle wiz is designed for applications including saddle cuts, threadolets, weldolets.

This gas welding outfit has a 90-degree head angle and is designed for acetylene and oxygen use. It includes a cutting tip, tip cleaner, striker, goggles, hose, welding nozzle, and heating nozzle. This product cuts up to eight inches and welds up to three inches. It also has a 2460+ cutting attachment and 315FC+ torch handle.

This gas welding outfit has a 90-degree head angle and is designed for acetylene and oxygen use. It includes a cutting tip, tip cleaner, striker, goggles, hose, welding nozzle, and heating nozzle. This product cuts up to eight inches and welds up to three inches. It also has a 2460+ cutting attachment and 315FC+ torch handle.

This Tag-A-Long outfit with tanks includes check valves, cylinder carrier, and safety goggles. In addition, it is designed for applications including cutting, welding.

This Tag-A-Long outfit with tanks includes check valves, cylinder carrier, and safety goggles. In addition, it is designed for applications including cutting, welding.

This tool is ideal for shop or maintenance department that must occasionally cut circles or straight lines, but where expensive equipment is not practical. Magnetic Holding Base for CB-20 or CB-30 Circle Burner. Magnet with 16 lbs. (7.3 kg) direct pull holds centering pin in place.

This tool is ideal for shop or maintenance department that must occasionally cut circles or straight lines, but where expensive equipment is not practical. Magnetic Holding Base for CB-20 or CB-30 Circle Burner. Magnet with 16 lbs. (7.3 kg) direct pull holds centering pin in place.

This Mastar Outfits welding outfit includes A-8 twister air/fuel tip, carrying stand, F13 air/ fuel adaptor, regulator protective rubber gauge boots. In addition, it is designed for applications including brazing, cutting, welding.

This Mastar Outfits welding outfit includes A-8 twister air/fuel tip, carrying stand, F13 air/ fuel adaptor, regulator protective rubber gauge boots. In addition, it is designed for applications including brazing, cutting, welding.

This tool is ideal for shop or maintenance department that must occasionally cut circles or straight lines, but where expensive equipment is not practical. Magnetic Holding Base for CB-20 or CB-30 Circle Burner. Magnet with 16 lbs. (7.3 kg) direct pull holds centering pin in place.

This tool is ideal for shop or maintenance department that must occasionally cut circles or straight lines, but where expensive equipment is not practical. Magnetic Holding Base for CB-20 or CB-30 Circle Burner. Magnet with 16 lbs. (7.3 kg) direct pull holds centering pin in place.

This Toughcut gas welding outfit includes friction lighter, regulator mount check valves, and safety glasses. In addition, it is designed for applications including cutting, heating, welding. It meets the standards for ETL listed, UL listed.

This Toughcut gas welding outfit includes friction lighter, regulator mount check valves, and safety glasses. In addition, it is designed for applications including cutting, heating, welding. It meets the standards for ETL listed, UL listed.