Insulated tools have a nonconductive coating or cover to reduce the risk of electrical arcing and protect against electrical shock from accidental contact with live circuits.
ESD SafeESD-safe tools have handle materials or coatings that dissipate electrostatic charges to protect static-sensitive electrical components from damage.
Fastener HoldingFastener-holding drivers have a mechanism that holds fasteners during installation to help prevent them from being dropped.
Suggested results for "SUGGEST-ITEM"
Product ITEM is unavailable. See products from the same category below.
Nut Drivers
Nut drivers look similar to a screwdriver, but have a socket attached to a shaft with an attached handle to turn the tool for tightening or loosening nuts and bolts in low-torque applications. These manual tools have sockets that fit around and grip around the entire head of the fastener for a secure fit. They provide more contact to the fastener head than an open-end wrench so the socket is less likely to slip off the fastener when the nut driver is turned. Nut drivers generally have a hollow shaft that allows a threaded bolt to pass through so the tool can turn fasteners on long threaded bolts. They are used for low torque use such as appliance repair and electronics applications.
This nut driver has a length of 9¾ inches and is not insulated. The multicomponent handle is black and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 9¾ inches and is not insulated. The multicomponent handle is black and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 6¾ inches and is not insulated. The rubber handle is blue and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 6¾ inches and is not insulated. The rubber handle is blue and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 11¼ inches and is not insulated. The rubber handle is yellow and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 11¼ inches and is not insulated. The rubber handle is yellow and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 9¼ inches and is not insulated. The rubber handle is orange and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 9¼ inches and is not insulated. The rubber handle is orange and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
Insulated cushion-grip, hollow-shaft nut drivers. Cushion-grip handles for greater torque and comfort. Handle caps are colour-coded for easy size identification. Strong hex-head drives nuts and socket screws. Insulated, full hollow-shaft permits turning nuts on long screws. 1/2 inch.
Insulated cushion-grip, hollow-shaft nut drivers. Cushion-grip handles for greater torque and comfort. Handle caps are colour-coded for easy size identification. Strong hex-head drives nuts and socket screws. Insulated, full hollow-shaft permits turning nuts on long screws. 1/2 inch.
This nut driver has a length of 7¼ inches and is not insulated. The rubber handle is brown and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 7¼ inches and is not insulated. The rubber handle is brown and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 7¼ inches and is not insulated. The rubber handle is red and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 7¼ inches and is not insulated. The rubber handle is red and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 10 inches and is not insulated. The handle is brown. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, and has a chrome finish.
This nut driver has a length of 10 inches and is not insulated. The handle is brown. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, and has a chrome finish.
This nut driver has a length of 9⅝ inches and is not insulated. The handle is yellow. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, and has a chrome finish.
This nut driver has a length of 9⅝ inches and is not insulated. The handle is yellow. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, and has a chrome finish.
This nut driver has a length of 3½ inches and is not insulated. The rubber handle is red and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 3½ inches and is not insulated. The rubber handle is red and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 6¾ inches and is not insulated. The rubber handle is red and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 6¾ inches and is not insulated. The rubber handle is red and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 6¾ inches and is not insulated. The rubber handle is green and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 6¾ inches and is not insulated. The rubber handle is green and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 3½ inches and is not insulated. The rubber handle is yellow and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 3½ inches and is not insulated. The rubber handle is yellow and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 6¾ inches and is not insulated. The rubber handle is yellow and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 6¾ inches and is not insulated. The rubber handle is yellow and has a straight shape, and a moulded style/type. It meets the standards for ANSI, ASME. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 6¾ inches and is not insulated. The multicomponent handle is yellow and has a straight shape, and a moulded style/type. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is not non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 6¾ inches and is not insulated. The multicomponent handle is yellow and has a straight shape, and a moulded style/type. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is not non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 6¾ inches and is not insulated. The rubber handle is red and has a straight shape, and a moulded style/type. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is not non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
This nut driver has a length of 6¾ inches and is not insulated. The rubber handle is red and has a straight shape, and a moulded style/type. In addition, it has a SAE measurement type, is corrosion-resistant, plus it is not non-sparking, is not non-magnetic, and is not tether ready with an ergonomic grip. This nut driver includes one piece.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
