Product ITEM is unavailable. See products from the same category below.
High-Speed Steel Straight-Flute Hand Taps
High-speed steel taps provide good wear resistance in general purpose tapping applications in a range of materials. Also called hand taps, high-speed steel straight-flute taps are turned with a tap wrench to create or repair internal threads in blind holes and through holes. As the taps are rotated into a hole to create threads, the chips move into the flutes but are not evacuated.
This bottoming hand tap is 44.45 millimetres long, with a M2.0 x 0.40 thread and a 3.58-millimetre shank diameter. This bright, right hand tap is made from high speed steel.
This bottoming hand tap is 44.45 millimetres long, with a M2.0 x 0.40 thread and a 3.58-millimetre shank diameter. This bright, right hand tap is made from high speed steel.
This tap is made of high speed steel and has a 0.318 inch diameter, 1.5940 inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.
This tap is made of high speed steel and has a 0.318 inch diameter, 1.5940 inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This HTGP series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 2-23/32 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.381 inch diameter, 1.6880 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1003 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 2-15/16 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.381 inch diameter, 1.6880 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1003 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It has right hand direction with a 2-15/16 inch length. Plus it has four flutes and a straight shank.
This plug hand tap is 2.13 inches long, with a #12-24 UNC thread and a 0.22-inch shank diameter. This right hand tap is made from high speed steel with a titanium nitride finish.
This plug hand tap is 2.13 inches long, with a #12-24 UNC thread and a 0.22-inch shank diameter. This right hand tap is made from high speed steel with a titanium nitride finish.
This hand tap is made of high speed steel and has a 0.323 inch diameter, 1.7180 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1002 series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 3.16 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.323 inch diameter, 1.7180 inch long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1002 series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 3.16 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.367 inch diameter, 43.66mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1002 series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 3⅜ inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.367 inch diameter, 43.66mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1002 series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 3⅜ inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.429 inch diameter, 49.21mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1002 series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 3.5938 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.429 inch diameter, 49.21mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1002 series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 3.5938 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.429 inch diameter, 49.21mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1002 series hand tap has a bright (uncoated) finish, and has metric measurements. It has right hand direction with a 3.5938 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.429 inch diameter, 49.21mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1002 series hand tap has a bright (uncoated) finish, and has metric measurements. It has right hand direction with a 3.5938 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.48 inch diameter, 50.80mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1002 series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 3.8125 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.48 inch diameter, 50.80mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1002 series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 3.8125 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.8 inch diameter, 2⅝ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1002 series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 5⅛ inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 0.8 inch diameter, 2⅝ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1002 series hand tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 5⅛ inch length. Plus it has four flutes and a straight shank.
This plug hand tap is 5.75 inches long, with a 1 1/4"-12 UNF thread and a 1.021-inch shank diameter. This bright, right hand tap is made from high speed steel.
This plug hand tap is 5.75 inches long, with a 1 1/4"-12 UNF thread and a 1.021-inch shank diameter. This bright, right hand tap is made from high speed steel.
This bottoming hand tap is 3 13/16 inches long, with a 5/8"-11 UNC thread and a 0.48-inch shank diameter. This right hand tap is made from high speed steel with a titanium nitride finish.
This bottoming hand tap is 3 13/16 inches long, with a 5/8"-11 UNC thread and a 0.48-inch shank diameter. This right hand tap is made from high speed steel with a titanium nitride finish.
This taper hand tap is 1.75 inches long, with a M2.0 x 0.40 thread and a 3.58-millimetre shank diameter. This bright, right hand tap is made from high speed steel.
This taper hand tap is 1.75 inches long, with a M2.0 x 0.40 thread and a 3.58-millimetre shank diameter. This bright, right hand tap is made from high speed steel.
This hand tap is made of high speed steel and has a 9.32mm diameter, 43.66mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1003 series hand tap has a bright (uncoated) finish, and has metric measurements. It has right hand direction with a 3⅜ inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 9.32mm diameter, 43.66mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1003 series hand tap has a bright (uncoated) finish, and has metric measurements. It has right hand direction with a 3⅜ inch length. Plus it has four flutes and a straight shank.
This tap is made of high speed steel and has a 0.367 inch diameter, 1.7190 inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1003 series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 3⅜ inch length. Plus it has three flutes and a straight shank.
This tap is made of high speed steel and has a 0.367 inch diameter, 1.7190 inch long shank. It is designed for use with aluminum, brass, bronze, cast iron, copper, steel, and meets the standards for USCTI. This 1003 series tap has a bright finish, and has fractional inch measurements. It has right hand direction with a 3⅜ inch length. Plus it has three flutes and a straight shank.
This hand tap is made of high speed steel and has a 12.19mm diameter, 50.80mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1003 series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 3-13/16 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of high speed steel and has a 12.19mm diameter, 50.80mm long shank. It is designed for use with all materials, and meets the standards for USCTI. This 1003 series hand tap has a bright finish, and has metric measurements. It has right hand direction with a 3-13/16 inch length. Plus it has four flutes and a straight shank.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
