General Purpose Cutting Oils

Coolcut metal cutting lubricant is high performance for all machining and chip removing operations in all ferrous and non-ferrous metals. Three separate lubricity formulations provide overlapping protection and contains no trichloroethne or chlorine.

Coolcut metal cutting lubricant is high performance for all machining and chip removing operations in all ferrous and non-ferrous metals. Three separate lubricity formulations provide overlapping protection and contains no trichloroethne or chlorine.

This general purpose cutting oil features formaldehyde-free, free of secondary amines, semisynthetic. It meets the standards for OSHA, 29 CFR 1910.1200. This yellow cutting oil is designed for use with drilling, milling, surface and cylindrical grinding, threading tapping, turning.

This general purpose cutting oil features formaldehyde-free, free of secondary amines, semisynthetic. It meets the standards for OSHA, 29 CFR 1910.1200. This yellow cutting oil is designed for use with drilling, milling, surface and cylindrical grinding, threading tapping, turning.

This way oil is brown is for use on lubrication slideways of all kinds under high load, hydraulic and general machine lubrication. This way oil features ash-free, minimal friction, reduced draining off vertical surfaces.

This way oil is brown is for use on lubrication slideways of all kinds under high load, hydraulic and general machine lubrication. This way oil features ash-free, minimal friction, reduced draining off vertical surfaces.

This cutting oil is for general purpose use and is light yellow. It is for use on centreless grinding, milling, profile grinding, and is for turning. This meets the standards for OSHA, 29 CFR 1910.1200. It features clear, colourless, controlled lubrication for extended wheel service life and dressing intervals, ensure reliable processes for a wide variety of applications, high grinding performance, low drag out.

This cutting oil is for general purpose use and is light yellow. It is for use on centreless grinding, milling, profile grinding, and is for turning. This meets the standards for OSHA, 29 CFR 1910.1200. It features clear, colourless, controlled lubrication for extended wheel service life and dressing intervals, ensure reliable processes for a wide variety of applications, high grinding performance, low drag out.

Alucut metal cutting lubricant stick for aluminum improves all machining. Unique formulation with no-stick additives keep the cutting tool free to prevent build-up. New formulation with better adherence. Coats cutting edge or workpiece.

Alucut metal cutting lubricant stick for aluminum improves all machining. Unique formulation with no-stick additives keep the cutting tool free to prevent build-up. New formulation with better adherence. Coats cutting edge or workpiece.

This cutting oil is for general purpose use and is light yellow. It is for use on drilling, machining operations, milling, reaming, sawing, and is for turning. This meets the standards for OSHA, 29 CFR 1910.1200. It features biodegradable, contains extreme pressure additives, free of solvents and chlorinated ingredients, nontoxic, suitable for all ferrous and non-ferrous metals.

This cutting oil is for general purpose use and is light yellow. It is for use on drilling, machining operations, milling, reaming, sawing, and is for turning. This meets the standards for OSHA, 29 CFR 1910.1200. It features biodegradable, contains extreme pressure additives, free of solvents and chlorinated ingredients, nontoxic, suitable for all ferrous and non-ferrous metals.

This cutting oil is for general purpose use and is colourless. It is for use on surface and cylindrical grinding. This meets the standards for OSHA, 29 CFR 1910.1200. It features clear and colourless solution, enhanced coolant life, good grinding performance, long coolant life.

This cutting oil is for general purpose use and is colourless. It is for use on surface and cylindrical grinding. This meets the standards for OSHA, 29 CFR 1910.1200. It features clear and colourless solution, enhanced coolant life, good grinding performance, long coolant life.

This cutting oil is for general purpose use and is yellow. It is for use on broaching, deep drilling, milling threading, and is for turning. This meets the standards for OSHA, 29 CFR 1910.1200. It features chlorine-free, designed specially for stainless steel and high tensile alloy, easy to remove, highest performance for severe cutting applications, low drag out, low evapouration loss, low fog.

This cutting oil is for general purpose use and is yellow. It is for use on broaching, deep drilling, milling threading, and is for turning. This meets the standards for OSHA, 29 CFR 1910.1200. It features chlorine-free, designed specially for stainless steel and high tensile alloy, easy to remove, highest performance for severe cutting applications, low drag out, low evapouration loss, low fog.

This cutting oil is for general purpose use and is yellow. It is for use on drilling, milling, reaming, sawing, and is for turning. This meets the standards for OSHA, 29 CFR 1910.1200. It features bacterial control ingredients, bactericides-free, extreme pressure additives, non-chlorinated ep additives, extraordinary cutting performance for optimal tool life, low foaming, no chlorine.

This cutting oil is for general purpose use and is yellow. It is for use on drilling, milling, reaming, sawing, and is for turning. This meets the standards for OSHA, 29 CFR 1910.1200. It features bacterial control ingredients, bactericides-free, extreme pressure additives, non-chlorinated ep additives, extraordinary cutting performance for optimal tool life, low foaming, no chlorine.

Stainlesscut extreme pressure cutting lubricant is for all severe chip removing operations in hard to machine metals including alloyed and stainless steel. Lower friction reduces load on machine tool and produces a better finish.

Stainlesscut extreme pressure cutting lubricant is for all severe chip removing operations in hard to machine metals including alloyed and stainless steel. Lower friction reduces load on machine tool and produces a better finish.

Tapcut thread cutting lubricant is specially formulated for thread cutting with taps and dies. This high performance cutting lubricant has unique qualities to reduce chip load and friction. For use on all type of metals including alloys and stainless steel.

Tapcut thread cutting lubricant is specially formulated for thread cutting with taps and dies. This high performance cutting lubricant has unique qualities to reduce chip load and friction. For use on all type of metals including alloys and stainless steel.

This ready-to-use coolant/lubricant is free of nitrates, amines, boron, phenol, and active sulphur. It has a flashpoint of 150 Degrees F. This blue-coloured, mineral oil-like lubricant is sold in 3.78-litre jugs.

This ready-to-use coolant/lubricant is free of nitrates, amines, boron, phenol, and active sulphur. It has a flashpoint of 150 Degrees F. This blue-coloured, mineral oil-like lubricant is sold in 3.78-litre jugs.

E-Weld is an effective anti-spatter emulsion. E-Weld protects work pieces, welding equipment and eliminates time consuming spatter removal work. Excellent corrosion resistance - ideal for ferrous alloys and corrosion sensitive parts. Size: 20 L.

E-Weld is an effective anti-spatter emulsion. E-Weld protects work pieces, welding equipment and eliminates time consuming spatter removal work. Excellent corrosion resistance - ideal for ferrous alloys and corrosion sensitive parts. Size: 20 L.

This cutting oil is for general purpose use and is light yellow. It is for use on drilling, machining operations, milling, reaming, sawing, and is for turning. This meets the standards for OSHA, 29 CFR 1910.1200. It features biodegradable, contains extreme pressure additives, free of solvents and chlorinated ingredients, nontoxic, suitable for all ferrous and non-ferrous metals.

This cutting oil is for general purpose use and is light yellow. It is for use on drilling, machining operations, milling, reaming, sawing, and is for turning. This meets the standards for OSHA, 29 CFR 1910.1200. It features biodegradable, contains extreme pressure additives, free of solvents and chlorinated ingredients, nontoxic, suitable for all ferrous and non-ferrous metals.

Stainlesscut extreme pressure cutting lubricant is for all severe chip removing operations in hard to machine metals including alloyed and stainless steel. Lower friction reduces load on machine tool and produces a better finish, 350 mL squeeze bottle.

Stainlesscut extreme pressure cutting lubricant is for all severe chip removing operations in hard to machine metals including alloyed and stainless steel. Lower friction reduces load on machine tool and produces a better finish, 350 mL squeeze bottle.

Coolcut metal cutting lubricant is high performance for all machining and chip removing operations in all ferrous and non-ferrous metals. Three separate lubricity formulations provide overlapping protection and contains no trichloroethne or chlorine.

Coolcut metal cutting lubricant is high performance for all machining and chip removing operations in all ferrous and non-ferrous metals. Three separate lubricity formulations provide overlapping protection and contains no trichloroethne or chlorine.