Filler Metals

This Stoody 1105 electrode is designed for use with the following materials: carbon, low-alloy steel. It has an overall diameter of 4 mm.

This Stoody 1105 electrode is designed for use with the following materials: carbon, low-alloy steel. It has an overall diameter of 4 mm.

This Blueshield LA C-6 LS MIG welding wire is a general purpose single or multi-pass, flat/horizontal position, metal-cored wire designed to weld carbon steel and some low alloy steels using carbon dioxide shielding gases when a minimum tensile strength of 483 MPa (70 ksi) is required. It is made of mild steel with a 0.045-inch diameter. Available in a 27.2-kilogram coil.

This Blueshield LA C-6 LS MIG welding wire is a general purpose single or multi-pass, flat/horizontal position, metal-cored wire designed to weld carbon steel and some low alloy steels using carbon dioxide shielding gases when a minimum tensile strength of 483 MPa (70 ksi) is required. It is made of mild steel with a 0.045-inch diameter. Available in a 27.2-kilogram coil.

These electrodes are used for welding mild steel. They are cellulosic AC/DC+ and are suited for maintenance work where dirty or rusty materials are found. They measure 14 x 3/16 inches, and the cellulose in the coating produces a stable, forceful penetrating arc. They come in a package weighing five kilograms.

These electrodes are used for welding mild steel. They are cellulosic AC/DC+ and are suited for maintenance work where dirty or rusty materials are found. They measure 14 x 3/16 inches, and the cellulose in the coating produces a stable, forceful penetrating arc. They come in a package weighing five kilograms.

This user-friendly LA EXCELARC 18 all-position, low hydrogen, basic AC/DC+ electrode is used to weld "difficult-to-weld" steels requiring Charpy impacts down to -30 Degrees C (-20 Degrees F), combined with a low hydrogen weld deposit. Suitable applications include structural steel fabrication, mining, forestry, maintenance, and repair. It is 12 inches in length with a 3/32-inch diameter, and meets CSA, Class E4918-H8 standards. Available in a 2.5-kilogram package.

This user-friendly LA EXCELARC 18 all-position, low hydrogen, basic AC/DC+ electrode is used to weld "difficult-to-weld" steels requiring Charpy impacts down to -30 Degrees C (-20 Degrees F), combined with a low hydrogen weld deposit. Suitable applications include structural steel fabrication, mining, forestry, maintenance, and repair. It is 12 inches in length with a 3/32-inch diameter, and meets CSA, Class E4918-H8 standards. Available in a 2.5-kilogram package.

This LA 8018-C3 electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 5½ pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E5518-C3, Class E8018-C3-H4, CSA W48.

This LA 8018-C3 electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 14 inches, an overall diameter of 1/8 inch, and weighs 5½ pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E5518-C3, Class E8018-C3-H4, CSA W48.

This LA 8018-C1 electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 12 inches, an overall diameter of 3/32 inches, and weighs 5½ pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E5518-C1, Class E8018-C1-H4, CSA W48.

This LA 8018-C1 electrode is made of low-alloy steel. In addition, it is for use with: steel. It has an overall length of 12 inches, an overall diameter of 3/32 inches, and weighs 5½ pounds. It can be used for stick welding (SMAW), in positions including flat, horizontal, overhead, vertical-down, vertical-up and meets the standards for AWS A5½/ASME SFA 5½, Class E5518-C1, Class E8018-C1-H4, CSA W48.

This TIG welding rod is made of carbon steel. It has an overall length of 914 mm, an overall diameter of 4 mm, and weighs 4.54 kilograms. It meets the standards for ER70S-2.

This TIG welding rod is made of carbon steel. It has an overall length of 914 mm, an overall diameter of 4 mm, and weighs 4.54 kilograms. It meets the standards for ER70S-2.

This MNR Cast 99, DC + AC, specialty welding electrode is made of 99% nickel and cast iron with a 100% non-conductive flux coating for very soft machinable welds in deep recesses or close access areas. It is 14 inches long with an 1/8-inch diameter, and has a minimum tensile strength of 40,000 PSI. Available in a five-kilogram package.

This MNR Cast 99, DC + AC, specialty welding electrode is made of 99% nickel and cast iron with a 100% non-conductive flux coating for very soft machinable welds in deep recesses or close access areas. It is 14 inches long with an 1/8-inch diameter, and has a minimum tensile strength of 40,000 PSI. Available in a five-kilogram package.

This MNR Cast 99, DC + AC, specialty welding electrode is made of 99% nickel and cast iron with a 100% non-conductive flux coating for very soft machinable welds in deep recesses or close access areas. It is 14 inches long with a 5/32-inch diameter, and has a minimum tensile strength of 40,000 PSI. Available in a five-kilogram package.

This MNR Cast 99, DC + AC, specialty welding electrode is made of 99% nickel and cast iron with a 100% non-conductive flux coating for very soft machinable welds in deep recesses or close access areas. It is 14 inches long with a 5/32-inch diameter, and has a minimum tensile strength of 40,000 PSI. Available in a five-kilogram package.

This MNR 4 X 4 specialty welding electrode measures 12 inches long with a 3/32-inch diameter, and is used for general maintenance and off-road, adverse-condition 4 x 4-inch welding. It is DC +/- AC, made of mild steel, and has a minimum tensile strength of 80,000 PSI. Available in a 0.45-kilogram package.

This MNR 4 X 4 specialty welding electrode measures 12 inches long with a 3/32-inch diameter, and is used for general maintenance and off-road, adverse-condition 4 x 4-inch welding. It is DC +/- AC, made of mild steel, and has a minimum tensile strength of 80,000 PSI. Available in a 0.45-kilogram package.

Use this MNR Universal mild-steel electrode for all-round repairs and general fabrication. It has a fast-freezing slag system for maximum positional operability and is ideal for high-speed welding on thin-gauge, clean, or new steel components. It is DC +/- AC, 12 inches long with a 3/32-inch diameter, and has a minimum tensile strength of 75,000 PSI. Available in a five-kilogram package.

Use this MNR Universal mild-steel electrode for all-round repairs and general fabrication. It has a fast-freezing slag system for maximum positional operability and is ideal for high-speed welding on thin-gauge, clean, or new steel components. It is DC +/- AC, 12 inches long with a 3/32-inch diameter, and has a minimum tensile strength of 75,000 PSI. Available in a five-kilogram package.

This MNR 4 X 4 specialty welding electrode measures 14 inches long with an 1/8-inch diameter, and is used for general maintenance and off-road, adverse-condition 4 x 4-inch welding. It is DC +/- AC, made of mild steel, and has a minimum tensile strength of 80,000 PSI. Available in a 0.45-kilogram package.

This MNR 4 X 4 specialty welding electrode measures 14 inches long with an 1/8-inch diameter, and is used for general maintenance and off-road, adverse-condition 4 x 4-inch welding. It is DC +/- AC, made of mild steel, and has a minimum tensile strength of 80,000 PSI. Available in a 0.45-kilogram package.

This Hard60 electrode has an overall length of 14 inches, an overall diameter of 5/32 inches, and weighs 11 pounds. It can be used for stick welding (SMAW), in positions including flat and horizontal.

This Hard60 electrode has an overall length of 14 inches, an overall diameter of 5/32 inches, and weighs 11 pounds. It can be used for stick welding (SMAW), in positions including flat and horizontal.

This MNR 4 X 4 specialty welding electrode measures 12 inches long with a 3/32-inch diameter, and is used for general maintenance and off-road, adverse-condition 4 x 4-inch welding. It is DC +/- AC, made of mild steel, and has a minimum tensile strength of 80,000 PSI. Available in a five-kilogram package.

This MNR 4 X 4 specialty welding electrode measures 12 inches long with a 3/32-inch diameter, and is used for general maintenance and off-road, adverse-condition 4 x 4-inch welding. It is DC +/- AC, made of mild steel, and has a minimum tensile strength of 80,000 PSI. Available in a five-kilogram package.

This MNR X-Treme, DC + AC, specialty welding electrode is made of high alloy steel with a minimum tensile strength of 130,000 PSI for exceptional strength and crack resistance. It is ideal for applications from broken bolt removal to welding "unknown" steel, and recommended for underlay and hardfacing of worn parts. It is 12 inches long with a 3/32-inch diameter and a 32% elongation. Available in a 0.45-kilogram package.

This MNR X-Treme, DC + AC, specialty welding electrode is made of high alloy steel with a minimum tensile strength of 130,000 PSI for exceptional strength and crack resistance. It is ideal for applications from broken bolt removal to welding "unknown" steel, and recommended for underlay and hardfacing of worn parts. It is 12 inches long with a 3/32-inch diameter and a 32% elongation. Available in a 0.45-kilogram package.

This LA 7014 mild-steel electrode is a rutile based, all-position, high-speed welding electrode operating on AC or DC current. It is used for all-purpose welding applications on a variety of steels including low-to-medium carbon steels. It is 14 inches in length with a 5/32-inch diameter, and meets CSA, Class E4914 standards. Available in a five-kilogram package.

This LA 7014 mild-steel electrode is a rutile based, all-position, high-speed welding electrode operating on AC or DC current. It is used for all-purpose welding applications on a variety of steels including low-to-medium carbon steels. It is 14 inches in length with a 5/32-inch diameter, and meets CSA, Class E4914 standards. Available in a five-kilogram package.