Crimp Hydraulic Hose Fittings with JIC Connection

This flange adapter meets the standards for ISO 6162-1 and -2, SAE J518, and it is made of steel. This flange adapter is for use on XHQ2 series hoses.

This flange adapter meets the standards for ISO 6162-1 and -2, SAE J518, and it is made of steel. This flange adapter is for use on XHQ2 series hoses.

This male connector creates leak-free connections for high-pressure applications. Hose fitting A is male with a 2 1/2"-8 thread size and a NPTF connection type. Hose fitting B has a 3"-12 thread size and a 37 Degrees flare tube connection. This connector has an overall length of 3.38 inches and conforms to SAE standards.

This male connector creates leak-free connections for high-pressure applications. Hose fitting A is male with a 2 1/2"-8 thread size and a NPTF connection type. Hose fitting B has a 3"-12 thread size and a 37 Degrees flare tube connection. This connector has an overall length of 3.38 inches and conforms to SAE standards.

Permanent crimp hydraulic coupling. Style 13743. Female JIC 37 degree swivel - 45 degree elbow - short drop.

Permanent crimp hydraulic coupling. Style 13743. Female JIC 37 degree swivel - 45 degree elbow - short drop.

This straight-thread connector has a male British Standard Pipe Parallel (BSPP) fitting to male Joint Industry Council (JIC) fitting.

This straight-thread connector has a male British Standard Pipe Parallel (BSPP) fitting to male Joint Industry Council (JIC) fitting.

This flare tube fitting meets the standards for SAE 071802, and it has a length of 2.50 inches.

This flare tube fitting meets the standards for SAE 071802, and it has a length of 2.50 inches.

Permanent crimp hydraulic coupling. Style 13943. Female JIC 37 degree swivel - 90 degree elbow - short drop.

Permanent crimp hydraulic coupling. Style 13943. Female JIC 37 degree swivel - 90 degree elbow - short drop.

This male connector creates leak-free connections for high-pressure applications. Hose fitting A is male with a 1/8"-27 thread size and a NPTF connection type. Hose fitting B has a 3/4"-16 thread size and a 37 Degrees flare tube connection. This connector has an overall length of 1.34 inches and conforms to SAE standards.

This male connector creates leak-free connections for high-pressure applications. Hose fitting A is male with a 1/8"-27 thread size and a NPTF connection type. Hose fitting B has a 3/4"-16 thread size and a 37 Degrees flare tube connection. This connector has an overall length of 1.34 inches and conforms to SAE standards.

This series 77U barbed hydraulic hose fitting is made of steel. It is rigid, male, crimped, and fits hose size 5/8 inches inside diameter. This high-pressure fitting delivers high performance, quick assembly, and the design flexibility of more than 500 configurations.

This series 77U barbed hydraulic hose fitting is made of steel. It is rigid, male, crimped, and fits hose size 5/8 inches inside diameter. This high-pressure fitting delivers high performance, quick assembly, and the design flexibility of more than 500 configurations.

This hydraulic crimp fitting meets the standards for SAE 100 R2, has a maximum operating pressure of 5,000 psi @ 70 Degrees F and is made of steel. In addition, it has a 9/16"-18 thread. Plus, it has a JIC x Crimp connection type. This hydraulic crimp fitting is for use on 301LT, 302, 304, 351ST, 351TC, 422, 424, 426, 431, 436, 451TC, 451ST, 471TC, 471ST, 472TC, 482TC, 482ST, 722TC, 881 series hoses.

This hydraulic crimp fitting meets the standards for SAE 100 R2, has a maximum operating pressure of 5,000 psi @ 70 Degrees F and is made of steel. In addition, it has a 9/16"-18 thread. Plus, it has a JIC x Crimp connection type. This hydraulic crimp fitting is for use on 301LT, 302, 304, 351ST, 351TC, 422, 424, 426, 431, 436, 451TC, 451ST, 471TC, 471ST, 472TC, 482TC, 482ST, 722TC, 881 series hoses.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a length of 45 mm, a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion and is made of steel. In addition, it has a ½"-14 thread. Plus, it has a 27 mm hex size.

This adapter meets the standards for ASTM B117/ISO 9227, ISO 8434-2, SAE J514, has a length of 45 mm, a maximum operating pressure of 7,500 psi and is designed for the following applications: gas handling connections and hydraulic fluid. It is resistant to corrosion and is made of steel. In addition, it has a ½"-14 thread. Plus, it has a 27 mm hex size.

Extend and expand pipes and hoses with this extender and expander with a Japanese Industry Standard (JIS) fitting.

Extend and expand pipes and hoses with this extender and expander with a Japanese Industry Standard (JIS) fitting.

This series 77U barbed hydraulic hose fitting is made of steel. It is rigid, male, crimped, and fits hose size 1/2 inches inside diameter. This high-pressure fitting delivers high performance, quick assembly, and the design flexibility of more than 500 configurations.

This series 77U barbed hydraulic hose fitting is made of steel. It is rigid, male, crimped, and fits hose size 1/2 inches inside diameter. This high-pressure fitting delivers high performance, quick assembly, and the design flexibility of more than 500 configurations.

This hydraulic crimp fitting meets the standards for SAE 100R2, has a maximum operating pressure of 6,000 psi @ 70 Degrees F and is made of steel. In addition, it has a ½"-20 thread. Plus, it has a JIC x Crimp connection type. This hydraulic crimp fitting is for use on 301LT, 302, 304, 351ST, 351TC, 422, 424, 426, 431, 436, 451TC, 451ST, 471TC, 471ST, 472TC, 482TC, 482ST, 722TC, 881 series hoses.

This hydraulic crimp fitting meets the standards for SAE 100R2, has a maximum operating pressure of 6,000 psi @ 70 Degrees F and is made of steel. In addition, it has a ½"-20 thread. Plus, it has a JIC x Crimp connection type. This hydraulic crimp fitting is for use on 301LT, 302, 304, 351ST, 351TC, 422, 424, 426, 431, 436, 451TC, 451ST, 471TC, 471ST, 472TC, 482TC, 482ST, 722TC, 881 series hoses.

This 37-degree flare connector has a 1/4 Joint Industries Council (JIC) to 1/4 male National Pipe Tapered (NPT) fitting.

This 37-degree flare connector has a 1/4 Joint Industries Council (JIC) to 1/4 male National Pipe Tapered (NPT) fitting.

This series 77U barbed hydraulic hose fitting is made of steel. It is straight, female, crimped, and fits hose size one-inch inside diameter. This high-pressure fitting has a swivel hose. It delivers high performance, quick assembly, and the design flexibility of more than 500 configurations.

This series 77U barbed hydraulic hose fitting is made of steel. It is straight, female, crimped, and fits hose size one-inch inside diameter. This high-pressure fitting has a swivel hose. It delivers high performance, quick assembly, and the design flexibility of more than 500 configurations.

This hydraulic inline has a maximum operating pressure of 5,000 psi @ 70 Degrees F and is made of steel. In addition, it has a 1 1/16"-12 thread.

This hydraulic inline has a maximum operating pressure of 5,000 psi @ 70 Degrees F and is made of steel. In addition, it has a 1 1/16"-12 thread.