!
Mise à niveau du navigateur recommandée: Améliorez votre expérience Grainger.ca en mettant à niveau votre navigateur vers Edge ou Chrome. En savoir plus sur nos navigateurs pris en charge.
Retour en haut

Filtrer les résultats par

Shop By
Brand
Price
Measurement System
Drill Bit Size
Decimal Equivalent
Finish - Machining
Drill Bit Point Angle
Drill Bit Point Type
Flute Type
Maximum Drilling Depth
Flute Length
Shank Dia.
Overall Length
Primary Material Application
Standards
Résultats suggérés pour "SUGGEST-ITEM"
Le produit ITEM n’est pas disponible. Voir les produits de la même catégorie ci-dessous.

Coolant-Through Solid Carbide Jobber-Length Drill Bits

These solid carbide jobber-length drill bits have holes that carry coolant from the drilling machine down to their tip. The coolant lubricates and cools down the drill bit to improve drilling precision and prevent wear to its cutting edges. Carbide drill bits provide excellent hardness, wear resistance, and heat resistance. They are harder than high-speed steel, cobalt, or powdered-metal drill bits and require a rigid setup such as a fixed-spindle machine. The bits create precise holes with a smooth finish and often eliminate the need for reaming the hole after drilling. Jobber-length drill bits provide a good balance of strength and accuracy when drilling into a variety of materials.

https://catalogue.grainger.ca/?hybris=true

 450  Résultats trouvés

Résultats par page :  16 | 32 | 48
  • APPROVED VENDOR
  • JOBBER LENGTH DRILL BIT, ⅜ IN DRILL BIT SIZE, 4¼ IN LENGTH, TIN COATED
  • N° article WWG36XF59
  • N° de modèle du manufacturier 450-103750A
  • Droit de manutention écologique: Droit de manutention écologique :
  • This C2 jobber length drill bit is made of carbide and has a ⅜ inch diameter, 1½ inch long shank. It is for use with all materials. This jobber length drill bit has a TiN finish, and has fractional inch measurements. It is coolant through with a 4¼ inch length. Plus it has two 2¾ inch spiral flutes, a straight shank, a right hand cutting direction, and a 118 Degrees split point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • APPROVED VENDOR
  • JOBBER LENGTH DRILL BIT, 13/64 IN DRILL BIT SIZE, 3 IN L , TIN COATED
  • N° article WWG36XF26
  • N° de modèle du manufacturier 450-102031A
  • Droit de manutention écologique: Droit de manutention écologique :
  • This C2 jobber length drill bit is made of carbide and has a 13/64 inch diameter, 1¼ inch long shank. It is designed for use with all materials. This jobber length drill bit has a TiN finish, and has fractional inch measurements. It is coolant through with a three-inch length. Plus it has two 1¾ inch spiral flutes, a straight shank, and a 118 Degrees split point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • APPROVED VENDOR
  • JOBBER LENGTH DRILL BIT, 3/16 IN DRILL BIT SIZE, 2¾ IN L , TIN COATED
  • N° article WWG36XF23
  • N° de modèle du manufacturier 450-101875A
  • Droit de manutention écologique: Droit de manutention écologique :
  • This C2 jobber length drill bit is made of carbide and has a 3/16 inch diameter, 1⅛ inch long shank. It is for use with all materials. This jobber length drill bit has a TiN finish, and has fractional inch measurements. It is coolant through with a 2¾ inch length. Plus it has two 1⅝ inch spiral flutes, a straight shank, a right hand cutting direction, and a 118 Degrees split point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • APPROVED VENDOR
  • JOBBER LENGTH DRILL BIT, F DRILL BIT SIZE, 3¼ IN LENGTH, CARBIDE, TIN COATED
  • N° article WWG36XG02
  • N° de modèle du manufacturier 450-202570A
  • Droit de manutention écologique: Droit de manutention écologique :
  • This C2 jobber length drill bit is made of carbide and has a ¼ inch diameter, 1¼ inch long shank. It is designed for use with all materials. This jobber length drill bit has a TiN finish, and has letter measurements. It is coolant through with a 3¼ inch length. Plus it has two 2 inch spiral flutes, a straight shank, a right hand cutting direction, and a 118 Degrees split point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • WIDIA
  • JOBBER LENGTH DRILL BIT, 16MM DRILL BIT SIZE, 133MM OVERALL L
  • N° article WIDVDS402A16000
  • N° de modèle du manufacturier VDS402A16000
  • Droit de manutention écologique: Droit de manutention écologique :
  • This WU25PD jobber length drill bit is made of carbide and has a 16 mm diameter, 48mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, and meets ANSI, DIN, and ISO standards. This VDS402 series jobber length drill bit has a TiAlN finish, and has metric measurements. It is coolant through with a 133mm length. Plus it has two 83mm helical flutes, a straight shank, and 140 Degrees conical point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • APPROVED VENDOR
  • JOBBER LENGTH DRILL BIT, #25 DRILL BIT SIZE, 2½ IN LENGTH, CARBIDE, TIN COATED
  • N° article WWG36XJ32
  • N° de modèle du manufacturier 450-301495A
  • Droit de manutention écologique: Droit de manutention écologique :
  • This C2 jobber length drill bit is made of carbide and has a 9/64 inch diameter, 1⅛ inch long shank. It is designed for use with all materials. This jobber length drill bit has a TiN finish, and has wire measurements. It is coolant through with a 2½ inch length. Plus it has two 1⅜ inch spiral flutes, a straight shank, a right hand cutting direction, and a 118 Degrees split point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • APPROVED VENDOR
  • JOBBER LENGTH DRILL BIT, #7 DRILL BIT SIZE, 3 IN LENGTH, CARBIDE, TIN COATED
  • N° article WWG36XJ86
  • N° de modèle du manufacturier 450-302010A
  • Droit de manutention écologique: Droit de manutention écologique :
  • This C2 jobber length drill bit is made of carbide and has a 3/16 inch diameter, 1¼ inch long shank. It is designed for use with all materials. This jobber length drill bit has a TiN finish, and has wire measurements. It is coolant through with a three-inch length. Plus it has two 1¾ inch spiral flutes, a straight shank, a right hand cutting direction, and a 118 Degrees split point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • APPROVED VENDOR
  • JOBBER LENGTH DRILL BIT, 7/64 IN DRILL BIT SIZE, 2¼ IN L , TIN COATED
  • N° article WWG36XF08
  • N° de modèle du manufacturier 450-101094A
  • Droit de manutention écologique: Droit de manutention écologique :
  • This C2 jobber length drill bit is made of carbide and has a 7/64 inch diameter, one-inch long shank. It is designed for use with all materials. This jobber length drill bit has a TiN finish, and has fractional inch measurements. It is coolant through with a 2¼ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, and a 118 Degrees split point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • APPROVED VENDOR
  • JOBBER LENGTH DRILL BIT, 25/64 IN DRILL BIT SIZE, 4½ IN LENGTH, TIN COATED
  • N° article WWG36XF62
  • N° de modèle du manufacturier 450-103906A
  • Droit de manutention écologique: Droit de manutention écologique :
  • This C2 jobber length drill bit is made of carbide and has a 25/64 inch diameter, 1⅝ inch long shank. It is designed for use with all materials. This jobber length drill bit has a TiN finish, and has fractional inch measurements. It is coolant through with a 4½ inch length. Plus it has two 2⅞ inch spiral flutes, a straight shank, and a 118 Degrees split point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • APPROVED VENDOR
  • JOBBER LENGTH DRILL BIT, 9/64 IN DRILL BIT SIZE, 2½ IN L , TIN COATED
  • N° article WWG36XF14
  • N° de modèle du manufacturier 450-101406A
  • Droit de manutention écologique: Droit de manutention écologique :
  • This C2 jobber length drill bit is made of carbide and has a 9/64 inch diameter, 1⅛ inch long shank. It is for use with all materials. This jobber length drill bit has a TiN finish, and has fractional inch measurements. It is coolant through with a 2½ inch length. Plus it has two 1⅜ inch spiral flutes, a straight shank, a right hand cutting direction, and a 118 Degrees split point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • APPROVED VENDOR
  • JOBBER LENGTH DRILL BIT, #31 DRILL BIT SIZE, 2¼ IN LENGTH, CARBIDE, TIN COATED
  • N° article WWG36XJ14
  • N° de modèle du manufacturier 450-301200A
  • Droit de manutention écologique: Droit de manutention écologique :
  • This C2 jobber length drill bit is made of carbide and has a 7/64 inch diameter, one-inch long shank. It is designed for use with all materials. This jobber length drill bit has a TiN finish, and has wire measurements. It is coolant through with a 2¼ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, a right hand cutting direction, and a 118 Degrees split point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • APPROVED VENDOR
  • JOBBER LENGTH DRILL BIT, ½ IN DRILL BIT SIZE, 4¾ IN LENGTH, TIN COATED
  • N° article WWG36XF83
  • N° de modèle du manufacturier 450-105000A
  • Droit de manutention écologique: Droit de manutention écologique :
  • This C2 jobber length drill bit is made of carbide and has a ½ inch diameter, 1¾ inch long shank. It is designed for use with all materials. This jobber length drill bit has a TiN finish, and has fractional inch measurements. It is coolant through with a 4¾ inch length. Plus it has two 3 inch spiral flutes, a straight shank, a right hand cutting direction, and a 118 Degrees split point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • APPROVED VENDOR
  • JOBBER LENGTH DRILL BIT, ⅛ IN DRILL BIT SIZE, 2¼ IN LENGTH, TIN COATED
  • N° article WWG36XF11
  • N° de modèle du manufacturier 450-101250A
  • Droit de manutention écologique: Droit de manutention écologique :
  • This C2 jobber length drill bit is made of carbide and has a ⅛ inch diameter, one-inch long shank. It is for use with all materials. This jobber length drill bit has a TiN finish, and has fractional inch measurements. It is coolant through with a 2¼ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, a right hand cutting direction, and a 118 Degrees split point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • APPROVED VENDOR
  • JOBBER LENGTH DRILL BIT, 7/32 IN DRILL BIT SIZE, 3 IN LENGTH, TIN COATED
  • N° article WWG36XF29
  • N° de modèle du manufacturier 450-102188A
  • Droit de manutention écologique: Droit de manutention écologique :
  • This C2 jobber length drill bit is made of carbide and has a 7/32 inch diameter, 1¼ inch long shank. It is designed for use with all materials. This jobber length drill bit has a TiN finish, and has fractional inch measurements. It is coolant through with a three-inch length. Plus it has two 1¾ inch spiral flutes, a straight shank, and a 118 Degrees split point drill point.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • APPROVED VENDOR
  • JOBBER LENGTH DRILL BIT, #29 DRILL BIT SIZE, 2½ IN LENGTH, CARBIDE, TIN COATED
  • N° article WWG36XJ20
  • N° de modèle du manufacturier 450-301360A
  • Droit de manutention écologique: Droit de manutention écologique :
  • Ce foret court en carbure C2 a un diamètre de 1/8 po/une tige de 1 1/8 po de long. Pour tous les matériaux. Ce foret a un fini TIN et des mesures de fil. Il est doté d’un canl de refroidissement et est 2 1/2 po de long. De plus, il a deux cannelures hélicoïdales de 1 3/8 po, une tige droite, un sens de coupe à droite et un angle de pointe de 118°.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
  • APPROVED VENDOR
  • FORET COURT, FORET NO 21, 2 1/2 PO LONG, CARBURE, ENDUIT EN ÉTAIN
  • N° article WWG36XJ44
  • N° de modèle du manufacturier 450-301590A
  • Droit de manutention écologique: Droit de manutention écologique :
  • Ce foret court en carbure C2 a un diamètre de 5/32 po/une tige de 1 1/8 po de long. Pour tous les matériaux. Ce foret a un fini TIN et des mesures de fil. Il a un canal de refroidissement et est 2 1/2 po de long. De plus, il a deux cannelures hélicoïdales de 1 3/8 po, une tige droite, un sens de coupe à droite et un angle de pointe de 118°.

    Voir plus Voir moins

    Document FDS introuvable

    Pour une assistance supplémentaire veuillez communiquer avec le coordinateur FDS par courriel à productcompliance@grainger.ca

    PAGE DU CATALOGUE # N/A
Résultats par page :  16 | 32 | 48

Ajouter à la liste de commande

Vos articles ont été ajoutés

Vos articles ont été ajoutés à certaines listes

Quantité maximale dépassée. Cet article n’a pas été ajouté à la liste ou aux listes suivante(s)

Aucune liste existante n’a été trouvée. Veuillez en créer une nouvelle ci-dessous.

Votre liste a été créée

Choisir ma liste de commande