For VoltageThis indicates the equipment voltage ratings the lockout can be used with.
Suggested results for "SUGGEST-ITEM"
Product ITEM is unavailable. See products from the same category below.
Circuit Breaker Lockout Devices
Circuit breaker lockouts keep breakers in the off position while equipment is serviced. After the breaker is secured in the off position, a padlock is required to ensure the lockout isn't removed by unauthorized personnel. These devices are an integral part of a facility lockout/tagout (LOTO) procedure designed to meet the OSHA standard for the Control of Hazardous Energy (Lockout/Tagout).
Standard height and tie-bar goggles. Narrow profile permits side-by-side breaker lockout. Compact devices are easy to care for and store. Durable construction with powder coated steel and reinforced polymer allows operation in harsh environments. OSHA com
Standard height and tie-bar goggles. Narrow profile permits side-by-side breaker lockout. Compact devices are easy to care for and store. Durable construction with powder coated steel and reinforced polymer allows operation in harsh environments. OSHA com
This circuit breaker lockout is made of polypropylene and it is red. It meets the standards for RoHS. In addition, it features: thumb screw tightening mechanism, measures 19/20 inch H x 19/20 inch W, and includes cleat. This clamp-on mount circuit breaker lockout is for use with internal-trip multi-pole breakers, padlocks with shackle up to 9/32 inch diameter, single-pole breakers, single pole circuit breakers, and 9/32 inch diameter padlocks.
This circuit breaker lockout is made of polypropylene and it is red. It meets the standards for RoHS. In addition, it features: thumb screw tightening mechanism, measures 19/20 inch H x 19/20 inch W, and includes cleat. This clamp-on mount circuit breaker lockout is for use with internal-trip multi-pole breakers, padlocks with shackle up to 9/32 inch diameter, single-pole breakers, single pole circuit breakers, and 9/32 inch diameter padlocks.
This circuit breaker lockout is made of polypropylene and it is red. It meets the standards for ANSI Z244, OSHA 29 CFR 1910.147. In addition, it features: thumb screw tightening mechanism, measures 1 36/61 inch H x 3¼ inch W, and includes cleat. This clamp-on mount circuit breaker lockout is for use with internal-trip multi-pole breakers, padlocks with shackle up to 9/32 inch diameter, single-pole breakers, single pole circuit breakers, and 9/32 inch diameter padlocks.
This circuit breaker lockout is made of polypropylene and it is red. It meets the standards for ANSI Z244, OSHA 29 CFR 1910.147. In addition, it features: thumb screw tightening mechanism, measures 1 36/61 inch H x 3¼ inch W, and includes cleat. This clamp-on mount circuit breaker lockout is for use with internal-trip multi-pole breakers, padlocks with shackle up to 9/32 inch diameter, single-pole breakers, single pole circuit breakers, and 9/32 inch diameter padlocks.
Appropriate for tall and wide breaker toggles. Narrow profile permits side-by-side breaker lockout. Compact devices are easy to care for and store. Durable construction with powder coated steel and reinforced polymer allows operation in harsh environments
Appropriate for tall and wide breaker toggles. Narrow profile permits side-by-side breaker lockout. Compact devices are easy to care for and store. Durable construction with powder coated steel and reinforced polymer allows operation in harsh environments
This din style miniature breaker lockout is made of fibreglass reinforced nylon and it is red. It is chemical resistant, meets the standards for ANSI and OSHA. In addition, it features: installed using the push button and requires no tools for installation, measures 0.54 inch D x 1 16/25 inch H x 19/20 inch W. This pin-out mount din style miniature breaker lockout is for use with multi-pole breakers, push button, single-pole breakers, mini circuit breakers, and 9/32 inch diameter padlocks.
This din style miniature breaker lockout is made of fibreglass reinforced nylon and it is red. It is chemical resistant, meets the standards for ANSI and OSHA. In addition, it features: installed using the push button and requires no tools for installation, measures 0.54 inch D x 1 16/25 inch H x 19/20 inch W. This pin-out mount din style miniature breaker lockout is for use with multi-pole breakers, push button, single-pole breakers, mini circuit breakers, and 9/32 inch diameter padlocks.
This circuit breaker lockout is made of metal, nylon and it is red. It meets the standards for OSHA 1910.147 and is in English. In addition, it measures 2.36 inch D x 1 19/50 inch H x 23/39 inch W. This circuit breaker lockout is for use with fuse holders, fuse circuit breakers, 5/16 inch diameter padlocks. The legend message is: Danger Do Not Remove Locked Out.
This circuit breaker lockout is made of metal, nylon and it is red. It meets the standards for OSHA 1910.147 and is in English. In addition, it measures 2.36 inch D x 1 19/50 inch H x 23/39 inch W. This circuit breaker lockout is for use with fuse holders, fuse circuit breakers, 5/16 inch diameter padlocks. The legend message is: Danger Do Not Remove Locked Out.
This circuit breaker lockout is made of nylon, is black/red, and meets OSHA standards. In addition, it allows for locking out vertically and horizontally adjacent breakers, knurled thumbscrew with slot for optional screwdriver adjustment, requires no tools for installation, measures 1 11/25 x 2 25/41 inch. This lockout is for use with miniature circuit breakers, multi-pole breakers, tie-bar toggles, Grip Tight circuit breakers, multipole circuit breakers, and 9/32 inch diameter padlocks.
This circuit breaker lockout is made of nylon, is black/red, and meets OSHA standards. In addition, it allows for locking out vertically and horizontally adjacent breakers, knurled thumbscrew with slot for optional screwdriver adjustment, requires no tools for installation, measures 1 11/25 x 2 25/41 inch. This lockout is for use with miniature circuit breakers, multi-pole breakers, tie-bar toggles, Grip Tight circuit breakers, multipole circuit breakers, and 9/32 inch diameter padlocks.
This circuit breaker lockout is made of glass-filled nylon and it is red. It is chemical resistant, meets the standards for ANSI Z244, OSHA 29 CFR 1910.147. In addition, it features: isolates and secures circuit breaker switches, measures 1.25 inch D x 1 1/20 inch H x 2 9/20 inch W. This tie bar mount circuit breaker lockout is for use with three-pole breakers with tie-bar, two-pole breakers with tie-bar, multipole circuit breakers, and 9/32 inch diameter padlocks.
This circuit breaker lockout is made of glass-filled nylon and it is red. It is chemical resistant, meets the standards for ANSI Z244, OSHA 29 CFR 1910.147. In addition, it features: isolates and secures circuit breaker switches, measures 1.25 inch D x 1 1/20 inch H x 2 9/20 inch W. This tie bar mount circuit breaker lockout is for use with three-pole breakers with tie-bar, two-pole breakers with tie-bar, multipole circuit breakers, and 9/32 inch diameter padlocks.
This circuit breaker lockout device fits molded case circuit breakers with 480 and 600 volts. The lockout device measures 2.97 length x 1.03 width x 1.72 height in inches. The fixed cleat allows physical blocking to prevent the switch from being turned on. The stainless steel thumbscrew and curved blade provide a tight grip on the breaker handle. The lockout body is made from black nylon and the lockout cover is made from red PC/ABS thermoplastic. No tools are required for installation.
This circuit breaker lockout device fits molded case circuit breakers with 480 and 600 volts. The lockout device measures 2.97 length x 1.03 width x 1.72 height in inches. The fixed cleat allows physical blocking to prevent the switch from being turned on. The stainless steel thumbscrew and curved blade provide a tight grip on the breaker handle. The lockout body is made from black nylon and the lockout cover is made from red PC/ABS thermoplastic. No tools are required for installation.
This single pole breaker lockout is made of polypropylene and it is red. It is chemical resistant, meets the standards for ANSI Z244, OSHA 29 CFR 1910.147. In addition, it measures 1 inch D x 19/20 inch H x 19/20 inch W, and includes cleat. This clamp-on mount single pole breaker lockout is for use with internal-trip multi-pole breakers, single-pole breakers, single pole circuit breakers, and 9/32 inch diameter padlocks.
This single pole breaker lockout is made of polypropylene and it is red. It is chemical resistant, meets the standards for ANSI Z244, OSHA 29 CFR 1910.147. In addition, it measures 1 inch D x 19/20 inch H x 19/20 inch W, and includes cleat. This clamp-on mount single pole breaker lockout is for use with internal-trip multi-pole breakers, single-pole breakers, single pole circuit breakers, and 9/32 inch diameter padlocks.
This din style miniature breaker lockout is made of plastic, steel and it is black/red. It meets the standards for ISO/DIN. In addition, it measures 7/10 inch H x 2 2/5 inch W. This pin-out mount din style miniature breaker lockout is for use with all master lock and American lock safety padlocks and lockout hasps, breakers with toggle openings 7/16 inch or less, mini circuit breakers, and 9/32 inch diameter padlocks.
This din style miniature breaker lockout is made of plastic, steel and it is black/red. It meets the standards for ISO/DIN. In addition, it measures 7/10 inch H x 2 2/5 inch W. This pin-out mount din style miniature breaker lockout is for use with all master lock and American lock safety padlocks and lockout hasps, breakers with toggle openings 7/16 inch or less, mini circuit breakers, and 9/32 inch diameter padlocks.
This oversized breaker lockout is made of polypropylene and it is red. It meets the standards for ANSI Z244, OSHA 29 CFR 1910.147. In addition, it features: isolates and secures circuit breaker switches, measures 1 1/10 inch H x 3¾ inch W. This oversized breaker lockout is for use with breaker switches, oversized circuit breakers, and 9/32 inch diameter padlocks.
This oversized breaker lockout is made of polypropylene and it is red. It meets the standards for ANSI Z244, OSHA 29 CFR 1910.147. In addition, it features: isolates and secures circuit breaker switches, measures 1 1/10 inch H x 3¾ inch W. This oversized breaker lockout is for use with breaker switches, oversized circuit breakers, and 9/32 inch diameter padlocks.
Narrow profile permits side-by-side breaker lockout. Compact devices are easy to care for and store. Durable construction with powder coated steel and reinforced polymer allows operation in harsh environments. OSHA compliant to 50 lbs. of Hang Weight.
Narrow profile permits side-by-side breaker lockout. Compact devices are easy to care for and store. Durable construction with powder coated steel and reinforced polymer allows operation in harsh environments. OSHA compliant to 50 lbs. of Hang Weight.
This circuit breaker lockout is made of plastic and it is red. It meets the standards for UL Listed. In addition, it features: made from recycled plastic, measures 2 x 1 x ¾ inch, and includes 3 do not operate labels. This slide-on mount circuit breaker lockout is for use with single pole switches 0.3 to 0.6 inch h, single pole switches 0.35 to 0.44 inch deep, RecycLockout circuit breakers, single pole circuit breakers, and 9/32 inch diameter padlocks. The legend message is: Do Not Operate.
This circuit breaker lockout is made of plastic and it is red. It meets the standards for UL Listed. In addition, it features: made from recycled plastic, measures 2 x 1 x ¾ inch, and includes 3 do not operate labels. This slide-on mount circuit breaker lockout is for use with single pole switches 0.3 to 0.6 inch h, single pole switches 0.35 to 0.44 inch deep, RecycLockout circuit breakers, single pole circuit breakers, and 9/32 inch diameter padlocks. The legend message is: Do Not Operate.
This single pole breaker lockout is made of polypropylene and it is red. It is chemical resistant, meets the standards for ANSI Z244, OSHA 29 CFR 1910.147. In addition, it measures 2.18 inch D x 1 36/61 inch H x 3¼ inch W, and includes cleat. This clamp-on mount single pole breaker lockout is for use with internal-trip multi-pole breakers, single-pole breakers, single pole circuit breakers, and 9/32 inch diameter padlocks.
This single pole breaker lockout is made of polypropylene and it is red. It is chemical resistant, meets the standards for ANSI Z244, OSHA 29 CFR 1910.147. In addition, it measures 2.18 inch D x 1 36/61 inch H x 3¼ inch W, and includes cleat. This clamp-on mount single pole breaker lockout is for use with internal-trip multi-pole breakers, single-pole breakers, single pole circuit breakers, and 9/32 inch diameter padlocks.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
