Product ITEM is unavailable. See products from the same category below.
All Purpose Heat Shrink Tubing
All purpose heat shrink tubing covers wire and cable and shrinks when heat is applied to create tightly sealed bundles. Also known as single- or thin-wall heat shrink tubing, it is used across a wide variety of applications to insulate, protect, bundle, and provide strain relief for wire and cable.
3/16 inch by 25 foot roll of black polyolefin heat shrink tubing that is flame retardant and flexible. The single walled tubing has a low shrink temperature of two to one at 90 degrees celsius and a dielectric strength of 600 volts. It is CSA and UL certified for use up to 125 degrees celsius. Mil-I-23053/3, class 1 and 3.
3/16 inch by 25 foot roll of black polyolefin heat shrink tubing that is flame retardant and flexible. The single walled tubing has a low shrink temperature of two to one at 90 degrees celsius and a dielectric strength of 600 volts. It is CSA and UL certified for use up to 125 degrees celsius. Mil-I-23053/3, class 1 and 3.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL 224 600V, 125 Degrees C, CSA, MIL-I-23053/4, and is RoHS compliant. It has length of four feet. It is also flame retardant.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL 224 600V, 125 Degrees C, CSA, MIL-I-23053/4, and is RoHS compliant. It has length of four feet. It is also flame retardant.
This two-pack of heat shrink tubing is red. In addition, it meets the standards for RoHS compliant. It has length of eight inches and 194 Degrees F maximum temperature.
This two-pack of heat shrink tubing is red. In addition, it meets the standards for RoHS compliant. It has length of eight inches and 194 Degrees F maximum temperature.
This heat shrink tubing is made of polyolefin, and is red. In addition, it meets the standards for UL Recognized and CSA certified at 125 Degrees C (257 Degrees F), Mil-I-23053/5, Class 1 and 3, RoHS compliant. It has length of 20 feet. It is also flame retardant, with a 257 Degrees F maximum temperature.
This heat shrink tubing is made of polyolefin, and is red. In addition, it meets the standards for UL Recognized and CSA certified at 125 Degrees C (257 Degrees F), Mil-I-23053/5, Class 1 and 3, RoHS compliant. It has length of 20 feet. It is also flame retardant, with a 257 Degrees F maximum temperature.
This assortment of single wall heat shrink tubing has a two to one shrink ratio. The pieces in this pack are six inches in length, are black and white with each colour having piece each of 1/8, 3/16 and 1/4 inch pieces, all with a dielectric strength of 600 volts, featuring excellent flexibility and flame retardance. They are all RoHS, CSA, and UL compliant products. The package comes with six pieces.
This assortment of single wall heat shrink tubing has a two to one shrink ratio. The pieces in this pack are six inches in length, are black and white with each colour having piece each of 1/8, 3/16 and 1/4 inch pieces, all with a dielectric strength of 600 volts, featuring excellent flexibility and flame retardance. They are all RoHS, CSA, and UL compliant products. The package comes with six pieces.
3/16 inch by 500 foot roll of black polyolefin heat shrink tubing that is flame retardant and flexible. It is CSA and UL certified for use up to 125 degrees celsius. Mil-I-23053/3, class 1 and 3. The single walled tubing has a low shrink temperature of two to one at 90 degrees celsius and a dielectric strength of 600 volts.
3/16 inch by 500 foot roll of black polyolefin heat shrink tubing that is flame retardant and flexible. It is CSA and UL certified for use up to 125 degrees celsius. Mil-I-23053/3, class 1 and 3. The single walled tubing has a low shrink temperature of two to one at 90 degrees celsius and a dielectric strength of 600 volts.
This heat shrink tubing is made of polyolefin, and is clear. In addition, it meets the standards for Mil-I-23053/5, Class 1 and 3, RoHS compliant. It has length of 10 feet. It is also flame retardant, with a 257 Degrees F maximum temperature.
This heat shrink tubing is made of polyolefin, and is clear. In addition, it meets the standards for Mil-I-23053/5, Class 1 and 3, RoHS compliant. It has length of 10 feet. It is also flame retardant, with a 257 Degrees F maximum temperature.
#4 size by 48 inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket with a specially formulated adhesive. The tubing also has a dielectric strength of 600 volts and a high shrink ratio of 4:1 with an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant.
#4 size by 48 inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket with a specially formulated adhesive. The tubing also has a dielectric strength of 600 volts and a high shrink ratio of 4:1 with an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL Recognized and CSA certified at 125 Degrees C (257 Degrees F), Mil-I-23053/5, Class 1 and 3, RoHS compliant. It has length of 125 feet. It is also flame retardant, with a 257 Degrees F maximum temperature.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL Recognized and CSA certified at 125 Degrees C (257 Degrees F), Mil-I-23053/5, Class 1 and 3, RoHS compliant. It has length of 125 feet. It is also flame retardant, with a 257 Degrees F maximum temperature.
This heat shrink tubing is made of polyolefin, and is clear. In addition, it meets the standards for Mil-I-23053/5, Class 1 and 3, RoHS compliant. It has length of 100 feet. It is also flame retardant, with a 257 Degrees F maximum temperature.
This heat shrink tubing is made of polyolefin, and is clear. In addition, it meets the standards for Mil-I-23053/5, Class 1 and 3, RoHS compliant. It has length of 100 feet. It is also flame retardant, with a 257 Degrees F maximum temperature.
Made of rugged, heat shrinkable nylon with a hot melt adhesive lining and colour-coded for AWG 22 to 10, these heat shrink butt splice feature high strength crimp barriers and a maximum voltage of 600. They come assorted in a pack of 12. The temperature range for these splices is -55 to 125 Degrees C.
Made of rugged, heat shrinkable nylon with a hot melt adhesive lining and colour-coded for AWG 22 to 10, these heat shrink butt splice feature high strength crimp barriers and a maximum voltage of 600. They come assorted in a pack of 12. The temperature range for these splices is -55 to 125 Degrees C.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL 224 600V, 125 Degrees C, CSA, MIL-I-23053/4, and is RoHS compliant. It has length of four feet. It is also flame retardant.
This heat shrink tubing is made of polyolefin, and is black. In addition, it meets the standards for UL 224 600V, 125 Degrees C, CSA, MIL-I-23053/4, and is RoHS compliant. It has length of four feet. It is also flame retardant.
They resist water, salt, and other contaminants and are made of rugged, heat shrinkable nylon with a hot melt adhesive lining. These splices can handle a temperature range of -55 to 125 Degrees C and are colour-coded for AWG 22 to 10. They feature high-strength crimp barriers and a maximum voltage of 600 and come in a pack of 100.
They resist water, salt, and other contaminants and are made of rugged, heat shrinkable nylon with a hot melt adhesive lining. These splices can handle a temperature range of -55 to 125 Degrees C and are colour-coded for AWG 22 to 10. They feature high-strength crimp barriers and a maximum voltage of 600 and come in a pack of 100.
#2 size by 48 inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket with a specially formulated adhesive. The tubing also has a dielectric strength of 600 volts and a high shrink ratio of 4:1 with an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant.
#2 size by 48 inches of black dual wall Thermfix Plus heat shrink tubing that is semi-rigid and flame-retardant with a polyolefin jacket with a specially formulated adhesive. The tubing also has a dielectric strength of 600 volts and a high shrink ratio of 4:1 with an extended operating temperature range from minus 40 degrees celsius up to 130 degrees celsius. Automotive industry approved, RoHS, CSA and UL compliant.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
