Keyed ChuckKeyed chucks include a key that mates with the chuck sleeve so it can be turned to open or close the jaws holding the bit. They minimize runout for tight-tolerance drilling and allow high torque to be applied for gripping the bits.
Keyless ChuckKeyless chucks have a sleeve that can be turned by hand to open or close the bit-holding jaws, so there's no need for a key. They allow faster bit replacement than keyed chucks.
ThreadedThreaded chucks have internal threads that accept specialized, threaded-shank bits sometimes found in assembly lines and production environments.
Suggested results for "SUGGEST-ITEM"
Product ITEM is unavailable. See products from the same category below.
Air-Powered Inline & Right-Angle Drills
Air-powered inline and right-angle drills have a straight body for gripping the tool and applying pressure to the bit during drilling and driving. Their weight is distributed along the tool body, so they're usually easier to hold steady than pistol-grip drills. They have a lever switch that is pressed with multiple fingers (rather than with a single finger like a trigger throttle) to reduce hand fatigue during extended use. These pneumatic drills operate on a compressed air supply to rotate bits in holemaking and fastening applications. They're commonly used in automotive and assembly work. Air-powered tools are typically lighter than corded or cordless tools, helping to reduce operator fatigue when used for long periods of time. They have fewer moving parts, so they tend to run cooler and have a longer lifespan than corded and cordless tools.
This reversing air drill has a free speed of 900 RPM and a required pressure of 90 PSI. It measures 10 3/16 length x 3/8 hose size. It has an aluminium handle, variable speeds, and throttle-type trigger. This drill has aluminium housing, ball bearings, and planetary gear train.
This reversing air drill has a free speed of 900 RPM and a required pressure of 90 PSI. It measures 10 3/16 length x 3/8 hose size. It has an aluminium handle, variable speeds, and throttle-type trigger. This drill has aluminium housing, ball bearings, and planetary gear train.
This reversing air drill has a free speed of 4000 RPM and a required pressure of 90 PSI. It measures 8 13/16 length x 3/8 hose size. It has an aluminium handle, variable speeds, and throttle-type trigger. This drill has aluminium housing, ball bearings, and planetary gear train.
This reversing air drill has a free speed of 4000 RPM and a required pressure of 90 PSI. It measures 8 13/16 length x 3/8 hose size. It has an aluminium handle, variable speeds, and throttle-type trigger. This drill has aluminium housing, ball bearings, and planetary gear train.
This reversing air drill has a free speed of 2600 RPM and a required pressure of 90 PSI. It measures 8 13/16 length x 3/8 hose size. It has an aluminium handle, variable speeds, and throttle-type trigger. This drill has aluminium housing, ball bearings, and planetary gear train.
This reversing air drill has a free speed of 2600 RPM and a required pressure of 90 PSI. It measures 8 13/16 length x 3/8 hose size. It has an aluminium handle, variable speeds, and throttle-type trigger. This drill has aluminium housing, ball bearings, and planetary gear train.
This reversing air drill has a free speed of 500 RPM and a required pressure of 90 PSI. It measures 5 11/16 length x 3/8 hose size x 1/4 inches NPT thread. It has an aluminium handle, variable speeds, and throttle-type trigger. This drill has aluminium housing, ball bearings, and planetary gear train.
This reversing air drill has a free speed of 500 RPM and a required pressure of 90 PSI. It measures 5 11/16 length x 3/8 hose size x 1/4 inches NPT thread. It has an aluminium handle, variable speeds, and throttle-type trigger. This drill has aluminium housing, ball bearings, and planetary gear train.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
