Steel Hydraulic Hose Adapters

This swivel connector is compatible with a pipe size of 1/2-inch, for use with a hose dash size eight, and has male by female threading. The threading on this connector comes in sizes 1 1/16"-12 by 1/2"-14, with ORB by NPSM connection types. This connector comes with a straight fitting shape, and is made of carbon steel that is zinc-plated. This swivel connector has a maximum working pressure of 3000 at 70 Degrees F, and includes O-rings.

This swivel connector is compatible with a pipe size of 1/2-inch, for use with a hose dash size eight, and has male by female threading. The threading on this connector comes in sizes 1 1/16"-12 by 1/2"-14, with ORB by NPSM connection types. This connector comes with a straight fitting shape, and is made of carbon steel that is zinc-plated. This swivel connector has a maximum working pressure of 3000 at 70 Degrees F, and includes O-rings.

This straight, swivel adapter is intended for hose dash size eight use, is compatible with pipe size 1/2-inch. This adapter has male by female threading, with NPT by NPSM connection types, in size 1/2"-14. This adapter is made of carbon steel and is zinc-plated, and has a maximum working pressure of 4000 at 70 Degrees F.

This straight, swivel adapter is intended for hose dash size eight use, is compatible with pipe size 1/2-inch. This adapter has male by female threading, with NPT by NPSM connection types, in size 1/2"-14. This adapter is made of carbon steel and is zinc-plated, and has a maximum working pressure of 4000 at 70 Degrees F.

Intended for use with a hole dash size of eight, this flange pipe adapter is compatible with a 1/2-inch pipe size, and has a flange size of 1/2-inch. With female threading, this straight, rigid adapter has a threading size of 1 3/16 inches by 1/2"-14 with a flange and NPT connection type.

Intended for use with a hole dash size of eight, this flange pipe adapter is compatible with a 1/2-inch pipe size, and has a flange size of 1/2-inch. With female threading, this straight, rigid adapter has a threading size of 1 3/16 inches by 1/2"-14 with a flange and NPT connection type.

Made from carbon steel and zinc plated, this rigid flange pipe kit comes with female threading with sizes 1 3/4" by 1"-11 1/2, with flange by NPT connection types. With a compatible pipe and flange size of one-inch, this straight shaped pipe kit is meant for use with a hole dash size of 16. This kit also comes with O-rings, and a maximum working pressure of 2000 at 70 Degrees F.

Made from carbon steel and zinc plated, this rigid flange pipe kit comes with female threading with sizes 1 3/4" by 1"-11 1/2, with flange by NPT connection types. With a compatible pipe and flange size of one-inch, this straight shaped pipe kit is meant for use with a hole dash size of 16. This kit also comes with O-rings, and a maximum working pressure of 2000 at 70 Degrees F.

This rigid 45-degree elbow hydraulic O-ring boss adapter is for use with hole dash size 4, has a maximum working pressure of 5000 at 70℉, and is made of zinc-plated carbon steel. Fitting A is male, connection type JIC, and measures 7/16"-20. Fitting B is male, connection type JIC, and measures 7/16"-20. The O-ring is included and is made of Buna N.

This rigid 45-degree elbow hydraulic O-ring boss adapter is for use with hole dash size 4, has a maximum working pressure of 5000 at 70℉, and is made of zinc-plated carbon steel. Fitting A is male, connection type JIC, and measures 7/16"-20. Fitting B is male, connection type JIC, and measures 7/16"-20. The O-ring is included and is made of Buna N.

This branch tee adapter is rigid, for use with hole dash size 406 and a hydraulic hose, and is made of carbon steel with zinc plating. Hose fitting A is female, connection type JIC, and measures 3/8"-18: fitting B is female, connection type JIC, and measures 9/16"-18: fitting C is female, connection type NPT, and measures 3/8"-18. This adapter has a maximum working pressure of 4000 at 70℉.

This branch tee adapter is rigid, for use with hole dash size 406 and a hydraulic hose, and is made of carbon steel with zinc plating. Hose fitting A is female, connection type JIC, and measures 3/8"-18: fitting B is female, connection type JIC, and measures 9/16"-18: fitting C is female, connection type NPT, and measures 3/8"-18. This adapter has a maximum working pressure of 4000 at 70℉.

Designed to fit hydraulic hoses with a 1/4-inch pipe and a hole dash size-4, this long elbow is able to stand a maximum working pressure of 5000 PSI at 70 Degrees F. Fitting A has a male NPT connection type with a thread size of 1/4"-18, and fitting B has a male JIC connection with a thread size of 9/16"-18. This fitting is made of carbon steel with zinc coating and has a long, rigid, 90-degree shape.

Designed to fit hydraulic hoses with a 1/4-inch pipe and a hole dash size-4, this long elbow is able to stand a maximum working pressure of 5000 PSI at 70 Degrees F. Fitting A has a male NPT connection type with a thread size of 1/4"-18, and fitting B has a male JIC connection with a thread size of 9/16"-18. This fitting is made of carbon steel with zinc coating and has a long, rigid, 90-degree shape.

Rigid 90 Degrees hydraulic hose elbow. Fitting A is female, with NPT connection, 1/4"-18. Fitting B is male, with JIC connection, 1/2"-20. Made of carbon steel with zinc plating, it is for hole dash size -4 and compatible with 1/4-inch pipes. This elbow has a maximum working pressure of 5000 PSI at 70 Degrees F.

Rigid 90 Degrees hydraulic hose elbow. Fitting A is female, with NPT connection, 1/4"-18. Fitting B is male, with JIC connection, 1/2"-20. Made of carbon steel with zinc plating, it is for hole dash size -4 and compatible with 1/4-inch pipes. This elbow has a maximum working pressure of 5000 PSI at 70 Degrees F.

This hydraulic hose plug bushing is made of zinc coated carbon steel and can withstand a maximum pressure of 2250 PSI at 70 Degrees F. Intended for use with hose dash size-2416, it has a rigid fitting connection type. Hose fitting A is BSPP, female, and has a 1 1/2"-11 thread size. Hose B fitting is JIC, male, and has a thread size of 1 5/8"-12. Buna N O-ring included.

This hydraulic hose plug bushing is made of zinc coated carbon steel and can withstand a maximum pressure of 2250 PSI at 70 Degrees F. Intended for use with hose dash size-2416, it has a rigid fitting connection type. Hose fitting A is BSPP, female, and has a 1 1/2"-11 thread size. Hose B fitting is JIC, male, and has a thread size of 1 5/8"-12. Buna N O-ring included.

This run tee fitting-shaped swivel connector is made of carbon steel and zinc-plated. This connector is intended for hose dash size four, and comes with female by female by male threads in size 1/4"-18 with NPT connection types. This connector comes with a maximum working pressure of 5000 at 70 Degrees F.

This run tee fitting-shaped swivel connector is made of carbon steel and zinc-plated. This connector is intended for hose dash size four, and comes with female by female by male threads in size 1/4"-18 with NPT connection types. This connector comes with a maximum working pressure of 5000 at 70 Degrees F.

This run tee fitting-shaped swivel connector is made of carbon steel and zinc-plated. This connector is intended for hose dash size six, and comes with female by female by male threads in size 3/8"-18 with an NPT connection type. This connector comes with a maximum working pressure of 4000 at 70 Degrees F.

This run tee fitting-shaped swivel connector is made of carbon steel and zinc-plated. This connector is intended for hose dash size six, and comes with female by female by male threads in size 3/8"-18 with an NPT connection type. This connector comes with a maximum working pressure of 4000 at 70 Degrees F.

This zinc-plated, carbon steel, 90 Degrees elbow with swivel contains male by female threading, in size 1/2"-14 by 1/4"-18, with NPT by NPSM connection types. Intended for use with a hole dash size of eight, this elbow has a compatible pipe size of 1/2 and 1/4-inch, and has a maximum work pressure of 4000 at 70 Degrees F.

This zinc-plated, carbon steel, 90 Degrees elbow with swivel contains male by female threading, in size 1/2"-14 by 1/4"-18, with NPT by NPSM connection types. Intended for use with a hole dash size of eight, this elbow has a compatible pipe size of 1/2 and 1/4-inch, and has a maximum work pressure of 4000 at 70 Degrees F.

This zinc-plated, carbon steel, 90 Degrees elbow with swivel contains male by female threading, in size 1/2"-14 by 3/4"-14, with NPT by NPSM connection types. Intended for use with a hole dash size of four, this elbow has a compatible pipe size of 1/2 and 3/4-inch, and has a maximum work pressure of 2250 at 70 Degrees F.

This zinc-plated, carbon steel, 90 Degrees elbow with swivel contains male by female threading, in size 1/2"-14 by 3/4"-14, with NPT by NPSM connection types. Intended for use with a hole dash size of four, this elbow has a compatible pipe size of 1/2 and 3/4-inch, and has a maximum work pressure of 2250 at 70 Degrees F.

This hex plug is made of carbon steel and plated with zinc, and has a hole dash size of 32. This straight, rigid plug comes with male threading, in size 10 millimetres by 9/16"-18, with a JIC connection type.

This hex plug is made of carbon steel and plated with zinc, and has a hole dash size of 32. This straight, rigid plug comes with male threading, in size 10 millimetres by 9/16"-18, with a JIC connection type.

Hook hydraulic hoses to various components with this rigid, straight-fitting connector. This connector is made for hoses with a hole dash size of 806. It can withstand a maximum pressure of 4000 PSI and a temperature of 70 Degrees F. Hose fitting A is male and has a 1/2"-14 thread size, with a BSPP connection type. Hose fitting B is male and has a 9/16"-18 thread size, with a JIC connection type. Each connector is made from carbon steel with a zinc coating.

Hook hydraulic hoses to various components with this rigid, straight-fitting connector. This connector is made for hoses with a hole dash size of 806. It can withstand a maximum pressure of 4000 PSI and a temperature of 70 Degrees F. Hose fitting A is male and has a 1/2"-14 thread size, with a BSPP connection type. Hose fitting B is male and has a 9/16"-18 thread size, with a JIC connection type. Each connector is made from carbon steel with a zinc coating.

Use this rigid, straight-fitting connector to help your hydraulic hoses maintain pressure. This connector is made for hoses with a hole dash size of 1212. It can withstand a maximum pressure of 4000 PSI and a temperature of 70 Degrees F. Hose fitting A is male and has a 3/4"-14 thread size, with a BSPP connection type. Hose fitting B is male and has a 1 1/16"-12 thread size, with a JIC connection type. Each connector is made from carbon steel with a zinc coating ad includes a Buna N O-ring.

Use this rigid, straight-fitting connector to help your hydraulic hoses maintain pressure. This connector is made for hoses with a hole dash size of 1212. It can withstand a maximum pressure of 4000 PSI and a temperature of 70 Degrees F. Hose fitting A is male and has a 3/4"-14 thread size, with a BSPP connection type. Hose fitting B is male and has a 1 1/16"-12 thread size, with a JIC connection type. Each connector is made from carbon steel with a zinc coating ad includes a Buna N O-ring.