Product ITEM is unavailable. See products from the same category below.
Pry Bars
Pry bars use their body as a lever to shift, align, lift, and pull apart materials. Also known as crowbars, they have claw, chisel, or pointed tips on one or both ends that slide underneath, strike against, or press through parts and workpieces. Shorter bars provide more precise control but less leverage than longer bars. Typical applications for pry bars include opening crates and containers, demolishing flooring and roofing, removing trim and siding, and pulling nails.
This Wonder Bar X21 series pry bar has a diameter of 1¾ inch and a length of 21 inch, plus it weighs 2.3 pounds. The handle is black/yellow. It features corrosion-resistance, nail slots on claw ends with bevelled edges and meets the standards for ASME. In addition, it has a powder coated finish, and is not tether ready.
This Wonder Bar X21 series pry bar has a diameter of 1¾ inch and a length of 21 inch, plus it weighs 2.3 pounds. The handle is black/yellow. It features corrosion-resistance, nail slots on claw ends with bevelled edges and meets the standards for ASME. In addition, it has a powder coated finish, and is not tether ready.
Forged Hexagonal steel ripping bar, 3/4 x 36 inches. High carbon steel for extra strength. Chisel end bevelled. Claw and chisel end polished, claw slotted.
Forged Hexagonal steel ripping bar, 3/4 x 36 inches. High carbon steel for extra strength. Chisel end bevelled. Claw and chisel end polished, claw slotted.
4-in-1 tool for prying, splitting, board bending and striking jobs. One piece forged steel bar, two-tiered jaws for grabbing common dimensional lumber and decking. Beveled nail slot for pulling and prying nails. Tempered steel prevents chipping. Length: 18 inches.
4-in-1 tool for prying, splitting, board bending and striking jobs. One piece forged steel bar, two-tiered jaws for grabbing common dimensional lumber and decking. Beveled nail slot for pulling and prying nails. Tempered steel prevents chipping. Length: 18 inches.
This Fatmax series high-visibility wrecking bar has a diameter of ¾ inch and a length of 24 inch, plus it weighs 5.7 pounds. The handle is yellow. It features bevelled nail slot, forged recesses in bar, tear shaped, tri-lobe design and meets the standards for ASME. In addition, it has a powder coated finish, and is not tether ready.
This Fatmax series high-visibility wrecking bar has a diameter of ¾ inch and a length of 24 inch, plus it weighs 5.7 pounds. The handle is yellow. It features bevelled nail slot, forged recesses in bar, tear shaped, tri-lobe design and meets the standards for ASME. In addition, it has a powder coated finish, and is not tether ready.
This nail puller has a diameter of ¾ inch and a length of 11 inch, plus it weighs 1.1 pounds. The handle is black/yellow. It features corrosion-resistance, high-visibility, nail slots on claw ends and meets the standards for ASME. In addition, it has a powder coated finish, and is not tether ready.
This nail puller has a diameter of ¾ inch and a length of 11 inch, plus it weighs 1.1 pounds. The handle is black/yellow. It features corrosion-resistance, high-visibility, nail slots on claw ends and meets the standards for ASME. In addition, it has a powder coated finish, and is not tether ready.
This Fatmax series pry bar has a diameter of 1¾ inch and a length of 36 inch, plus it weighs 8.4 pounds. The handle is yellow. It features bevelled nail slot, forged recesses in bar, tear shaped, tri-lobe design and meets the standards for ASME. In addition, it has a powder coated finish, and is not tether ready.
This Fatmax series pry bar has a diameter of 1¾ inch and a length of 36 inch, plus it weighs 8.4 pounds. The handle is yellow. It features bevelled nail slot, forged recesses in bar, tear shaped, tri-lobe design and meets the standards for ASME. In addition, it has a powder coated finish, and is not tether ready.
Super wonder bar pry bar, 15-9/16 inches. Extra long length. Tightly radiused bend angle for precise positioning. Extra long tongue for better grip and longer reach. Arch in centre of bar gives more swing during nail pulling. Works as a panel lift.
Super wonder bar pry bar, 15-9/16 inches. Extra long length. Tightly radiused bend angle for precise positioning. Extra long tongue for better grip and longer reach. Arch in centre of bar gives more swing during nail pulling. Works as a panel lift.
Wonder bar pry bar, 12-3/8 inches. Forged high carbon steel. Heat treated for extra toughness with polished and bevelled cutting edges. Contoured bar is ideal for pulling nails, prying, lifting, scraping. Bevelled nail slot both ends. Blade width, 1-3/4 inches.
Wonder bar pry bar, 12-3/8 inches. Forged high carbon steel. Heat treated for extra toughness with polished and bevelled cutting edges. Contoured bar is ideal for pulling nails, prying, lifting, scraping. Bevelled nail slot both ends. Blade width, 1-3/4 inches.
This nail puller has a diameter of 7/16 inch and a length of 12 inch, plus it weighs 0.98 pounds. The handle is grey. It features flat striking face, forged, tempered and meets the standards for ASME. In addition, it has a polished finish, and is not tether ready.
This nail puller has a diameter of 7/16 inch and a length of 12 inch, plus it weighs 0.98 pounds. The handle is grey. It features flat striking face, forged, tempered and meets the standards for ASME. In addition, it has a polished finish, and is not tether ready.
Forged Hexagonal steel ripping bar, 3/4 x 24 inches. High carbon steel for extra strength. Chisel end bevelled. Claw and chisel end polished, claw slotted.
Forged Hexagonal steel ripping bar, 3/4 x 24 inches. High carbon steel for extra strength. Chisel end bevelled. Claw and chisel end polished, claw slotted.
This nail puller has a diameter of ⅞ inch and a length of 8 inch, plus it weighs 0.5 pounds. The handle is black. It features flat striking face, forged, heat treated, tempered and meets the standards for ASME. In addition, it has a polished finish, and is not tether ready.
This nail puller has a diameter of ⅞ inch and a length of 8 inch, plus it weighs 0.5 pounds. The handle is black. It features flat striking face, forged, heat treated, tempered and meets the standards for ASME. In addition, it has a polished finish, and is not tether ready.
This Proto series pry bar has a length of 5 inch, 7½ inch, 9 inch. It features hi-visibility powder coat finish resists corrosion, one-piece forged steel construction for s and more and meets the standards for ASME. In addition, it has a powder coated finish. This pry bar includes three pieces, 5 inch bar, 7½ inch bar, 9 inch bar.
This Proto series pry bar has a length of 5 inch, 7½ inch, 9 inch. It features hi-visibility powder coat finish resists corrosion, one-piece forged steel construction for s and more and meets the standards for ASME. In addition, it has a powder coated finish. This pry bar includes three pieces, 5 inch bar, 7½ inch bar, 9 inch bar.
This Fatmax series pry bar has a diameter of ¾ inch and a length of 42 inch, plus it weighs 7 pounds. The handle is yellow. It features bevelled ends, high-visibility, lightweight design, precision ground edge. In addition, it has a powder coated finish, and is not tether ready.
This Fatmax series pry bar has a diameter of ¾ inch and a length of 42 inch, plus it weighs 7 pounds. The handle is yellow. It features bevelled ends, high-visibility, lightweight design, precision ground edge. In addition, it has a powder coated finish, and is not tether ready.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
