Product ITEM is unavailable. See products from the same category below.
Leather General Purpose Gloves & Mitts
Leather general purpose gloves and mitts protect hands from minor abrasion and cuts as well as incidental contact with heat and sparks. They resist wear and provide a balance of abrasion resistance and dexterity. They are often used in construction, carpentry, general maintenance, and landscaping.
These beige/blue/red MCR Safety Artic Jack 1965 leather gloves are size large and are made with Thermosock and pigskin leather. In addition, they have cotton and polyester stitching, and a wing thumb style. They are full-finger and have a safety cuff.
These beige/blue/red MCR Safety Artic Jack 1965 leather gloves are size large and are made with Thermosock and pigskin leather. In addition, they have cotton and polyester stitching, and a wing thumb style. They are full-finger and have a safety cuff.
Made with leather backing and stitched with Kevlar(R), this pair of insulated gloves is designed to keep your hands protected. These gloves are size small/7 and feature wing thumbs.
Made with leather backing and stitched with Kevlar(R), this pair of insulated gloves is designed to keep your hands protected. These gloves are size small/7 and feature wing thumbs.
These beige/black MCR Safety 1970 leather gloves are size XX-large and are made with Thermosock and pigskin leather. In addition, they have cotton and polyester stitching, and a wing thumb style. They are full-finger and have a safety cuff.
These beige/black MCR Safety 1970 leather gloves are size XX-large and are made with Thermosock and pigskin leather. In addition, they have cotton and polyester stitching, and a wing thumb style. They are full-finger and have a safety cuff.
These grey MCR Safety Big Jake 1710 leather gloves are size large and are made with cotton fleece and cowhide leather. In addition, they have Kevlar stitching, and a wing thumb style. They are rated ANSI/ISEA Cut Level A2. They are full-finger and have a gauntlet cuff.
These grey MCR Safety Big Jake 1710 leather gloves are size large and are made with cotton fleece and cowhide leather. In addition, they have Kevlar stitching, and a wing thumb style. They are rated ANSI/ISEA Cut Level A2. They are full-finger and have a gauntlet cuff.
These beige MCR Safety Mustang 1936 leather gloves are size X-large and are made with cotton fleece and cowhide leather. In addition, they have cotton and polyester stitching, and a wing thumb style. They have a gauntlet cuff.
These beige MCR Safety Mustang 1936 leather gloves are size X-large and are made with cotton fleece and cowhide leather. In addition, they have cotton and polyester stitching, and a wing thumb style. They have a gauntlet cuff.
These blue/grey/yellow leather gloves are size large. In addition, they have Kevlar stitching, and a wing thumb style. Leather general purpose gloves and mitts protect hands from minor abrasion and cuts as well as incidental contact with heat and sparks. They resist wear and provide a balance of abrasion resistance and dexterity. They are often used in construction, carpentry, general maintenance, and landscaping.
These blue/grey/yellow leather gloves are size large. In addition, they have Kevlar stitching, and a wing thumb style. Leather general purpose gloves and mitts protect hands from minor abrasion and cuts as well as incidental contact with heat and sparks. They resist wear and provide a balance of abrasion resistance and dexterity. They are often used in construction, carpentry, general maintenance, and landscaping.
These grey MCR Safety Big Jake 1702 leather gloves are size medium and are made with Kevlar and cowhide leather. In addition, they have Kevlar stitching, and a wing thumb style. They are rated ANSI/ISEA Cut Level A3. They include a safety cuff.
These grey MCR Safety Big Jake 1702 leather gloves are size medium and are made with Kevlar and cowhide leather. In addition, they have Kevlar stitching, and a wing thumb style. They are rated ANSI/ISEA Cut Level A3. They include a safety cuff.
These grey/tan MCR Safety Big Jake 1700 leather gloves are size XX-large and are made with cotton fleece and cowhide leather. In addition, they have Kevlar stitching, and a wing thumb style. They are rated ANSI/ISEA Cut Level A2. They are full-finger and have a safety cuff.
These grey/tan MCR Safety Big Jake 1700 leather gloves are size XX-large and are made with cotton fleece and cowhide leather. In addition, they have Kevlar stitching, and a wing thumb style. They are rated ANSI/ISEA Cut Level A2. They are full-finger and have a safety cuff.
These beige MCR Safety Mustang 1935 leather gloves are size medium and are made with cotton fleece and cowhide leather. In addition, they have cotton and polyester stitching, and a wing thumb style. They are full-finger and have a safety cuff.
These beige MCR Safety Mustang 1935 leather gloves are size medium and are made with cotton fleece and cowhide leather. In addition, they have cotton and polyester stitching, and a wing thumb style. They are full-finger and have a safety cuff.
These white MCR Safety 3601K leather gloves are size XXX-large and are made with Kevlar and goatskin leather. In addition, they have Kevlar stitching, and straight thumb style. They are rated ANSI/ISEA Cut Level A5. They have a shirred slip-on cuff.
These white MCR Safety 3601K leather gloves are size XXX-large and are made with Kevlar and goatskin leather. In addition, they have Kevlar stitching, and straight thumb style. They are rated ANSI/ISEA Cut Level A5. They have a shirred slip-on cuff.
These tan MCR Safety 3204K leather gloves are size large and are made with Kevlar and cowhide leather. In addition, they have Kevlar stitching, and have a keystone thumb style. They are rated ANSI/ISEA Cut Level A2 /ANSI/ISEA Puncture Level 3. They are full-finger, have a shirred slip-on cuff, an EN 388 Rating of 4XX3, and a max temp of 390 Degrees F.
These tan MCR Safety 3204K leather gloves are size large and are made with Kevlar and cowhide leather. In addition, they have Kevlar stitching, and have a keystone thumb style. They are rated ANSI/ISEA Cut Level A2 /ANSI/ISEA Puncture Level 3. They are full-finger, have a shirred slip-on cuff, an EN 388 Rating of 4XX3, and a max temp of 390 Degrees F.
These white MCR Safety 3601K leather gloves are size small and are made with Kevlar and goatskin leather. In addition, they have Kevlar stitching, and straight thumb style. They are rated ANSI/ISEA Cut Level A5. They have a shirred slip-on cuff.
These white MCR Safety 3601K leather gloves are size small and are made with Kevlar and goatskin leather. In addition, they have Kevlar stitching, and straight thumb style. They are rated ANSI/ISEA Cut Level A5. They have a shirred slip-on cuff.
These beige driver gloves are size X-large. In addition, they have polyester and cotton stitching, and straight thumb style. They are rated ANSI/ISEA Puncture Level 3. They are full-finger, have a slip-on, open cuff. They feature premium grade grain cowhide leather, pull strap, rolled leather hem, straight thumb.
These beige driver gloves are size X-large. In addition, they have polyester and cotton stitching, and straight thumb style. They are rated ANSI/ISEA Puncture Level 3. They are full-finger, have a slip-on, open cuff. They feature premium grade grain cowhide leather, pull strap, rolled leather hem, straight thumb.
These beige driver gloves are size medium. In addition, they have polyester and cotton stitching, and have a keystone thumb style. They are rated ANSI/ISEA Puncture Level 3. They are full-finger, have a slip-on, open cuff. They feature keystone thumb, premium grade grain cowhide leather, rolled leather hem, shirred elastic back.
These beige driver gloves are size medium. In addition, they have polyester and cotton stitching, and have a keystone thumb style. They are rated ANSI/ISEA Puncture Level 3. They are full-finger, have a slip-on, open cuff. They feature keystone thumb, premium grade grain cowhide leather, rolled leather hem, shirred elastic back.
These beige driver gloves are size small. In addition, they have polyester and cotton stitching, and have a keystone thumb style. They are rated ANSI/ISEA Puncture Level 3. They are full-finger, have a slip-on, open cuff. They feature keystone thumb, premium grade grain cowhide leather, rolled leather hem, shirred elastic back.
These beige driver gloves are size small. In addition, they have polyester and cotton stitching, and have a keystone thumb style. They are rated ANSI/ISEA Puncture Level 3. They are full-finger, have a slip-on, open cuff. They feature keystone thumb, premium grade grain cowhide leather, rolled leather hem, shirred elastic back.
These grey/tan MCR Safety Big Jake 1700 leather gloves are size large and are made with cotton fleece and cowhide leather. In addition, they have Kevlar stitching, and a wing thumb style. They are rated ANSI/ISEA Cut Level A2. They are full-finger and have a safety cuff.
These grey/tan MCR Safety Big Jake 1700 leather gloves are size large and are made with cotton fleece and cowhide leather. In addition, they have Kevlar stitching, and a wing thumb style. They are rated ANSI/ISEA Cut Level A2. They are full-finger and have a safety cuff.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
