Product ITEM is unavailable. See products from the same category below.
General Purpose Tongue & Groove Pliers & Sets
General purpose tongue-and-groove pliers provide a wide jaw-capacity range to grip and turn pipes, fittings, fasteners, and other items in applications where insulated, non-sparking, or other special environment pliers aren't required. Also known as multigrips and groove-joint pliers, they have an adjustable pivot point for moving their lower jaw up or down a grooved channel to set the distance between the jaws. The jaws lock into place at the desired setting, remain parallel to maintain grip, and are angled from the handles to increase leverage.
This water pump pliers has a length of 11 13/16 inch, plus it weighs 530 g and is not insulated. It features effortless working, reliable locking of the hinge bolt with the first workload, self-clamping and more and meets the standards for DIN ISO 8976. In addition, it has a polished finish, plus it is not non-sparking, with a plastic standard cushion grip.
This water pump pliers has a length of 11 13/16 inch, plus it weighs 530 g and is not insulated. It features effortless working, reliable locking of the hinge bolt with the first workload, self-clamping and more and meets the standards for DIN ISO 8976. In addition, it has a polished finish, plus it is not non-sparking, with a plastic standard cushion grip.
This Knipex Cobra series water pump pliers has a length of 7¼ inch, plus it weighs 0.48 pounds and is not insulated. It features adjustment at the touch of a button directly on the work piece, box-joint design, fine adjust and more and meets the standards for DIN ISO 8976. In addition, it has a polished finish, plus it is non-sparking, and is tether ready with a bi-material knurled grip.
This Knipex Cobra series water pump pliers has a length of 7¼ inch, plus it weighs 0.48 pounds and is not insulated. It features adjustment at the touch of a button directly on the work piece, box-joint design, fine adjust and more and meets the standards for DIN ISO 8976. In addition, it has a polished finish, plus it is non-sparking, and is tether ready with a bi-material knurled grip.
Replaces a full set of inch and metric open end wrenches. Smooth jaws for damage free installation of plated fittings - working directly on chrome!. Adjustable tightening tool. Excellent for gripping, holding, pressing and bending applications. Zero backlash jaw surface pressure prevents damage to edges. Adjustment at the touch of a button. Parallel jaws allow infinitely variable gripping of all widths to the specified maximum size. Reliable catching of the hinge bolt: no unintentional shifting
Replaces a full set of inch and metric open end wrenches. Smooth jaws for damage free installation of plated fittings - working directly on chrome!. Adjustable tightening tool. Excellent for gripping, holding, pressing and bending applications. Zero backlash jaw surface pressure prevents damage to edges. Adjustment at the touch of a button. Parallel jaws allow infinitely variable gripping of all widths to the specified maximum size. Reliable catching of the hinge bolt: no unintentional shifting
Ideal for service & maintenance, equipment repair, automotive & general industry. Long, narrow jaws. Good access to the workpiece due to very slim construction of head and joint area. Grips flat material due to three-point rest. Quick tightening of nuts and bolts using ratchet action. Adjustment at the touch of a button directly on the workpiece, one handed operated. Box-joint design: high stability due to use of double guide. Reliable catching of the hinge bolt: no unintentional shifting
Ideal for service & maintenance, equipment repair, automotive & general industry. Long, narrow jaws. Good access to the workpiece due to very slim construction of head and joint area. Grips flat material due to three-point rest. Quick tightening of nuts and bolts using ratchet action. Adjustment at the touch of a button directly on the workpiece, one handed operated. Box-joint design: high stability due to use of double guide. Reliable catching of the hinge bolt: no unintentional shifting
Replaces a full set of inch and metric open end wrenches. Smooth jaws for damage free installation of plated fittings - working directly on chrome!. Adjustable tightening tool. Excellent for gripping, holding, pressing and bending applications. Zero backlash jaw surface pressure prevents damage to edges. Adjustment at the touch of a button. Parallel jaws allow infinitely variable gripping of all widths to the specified maximum size. Reliable catching of the hinge bolt: no unintentional shifting
Replaces a full set of inch and metric open end wrenches. Smooth jaws for damage free installation of plated fittings - working directly on chrome!. Adjustable tightening tool. Excellent for gripping, holding, pressing and bending applications. Zero backlash jaw surface pressure prevents damage to edges. Adjustment at the touch of a button. Parallel jaws allow infinitely variable gripping of all widths to the specified maximum size. Reliable catching of the hinge bolt: no unintentional shifting
This Knipex Alligator series water pump pliers has a length of 10 inch, plus it weighs 0.88 pounds and is not insulated. It features box-joint design, hardened teeth to 61 hrc, high stability double guide, pinch guard, robust and more and meets the standards for DIN ISO 8976. In addition, it has a atramentized phosphate coat finish, plus it is non-sparking, and is tether ready with a bi-material deluxe cushion grip.
This Knipex Alligator series water pump pliers has a length of 10 inch, plus it weighs 0.88 pounds and is not insulated. It features box-joint design, hardened teeth to 61 hrc, high stability double guide, pinch guard, robust and more and meets the standards for DIN ISO 8976. In addition, it has a atramentized phosphate coat finish, plus it is non-sparking, and is tether ready with a bi-material deluxe cushion grip.
For opening widths up to 85 mm/3 3/8". Excellent for gripping, holding, pressing and bending applications. Optimised adjustment to the workpiece with hand-friendly position of grips. Zero backlash jaw surface pressure prevents damage to edges. Adjustment at the touch of a button directly on the workpiece. Parallel jaws allow infinitely variable gripping of all widths to the specified maximum size. Reliable catching of the hinge bolt: no unintentional shifting.
For opening widths up to 85 mm/3 3/8". Excellent for gripping, holding, pressing and bending applications. Optimised adjustment to the workpiece with hand-friendly position of grips. Zero backlash jaw surface pressure prevents damage to edges. Adjustment at the touch of a button directly on the workpiece. Parallel jaws allow infinitely variable gripping of all widths to the specified maximum size. Reliable catching of the hinge bolt: no unintentional shifting.
More output and comfort compared to conventional water pump pliers of the same length: offer 9 adjustment positioning for 30% more gripping capacity. Good access to the workpiece due to slim size in the head and joint area. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and reliable gripping. . . . .
More output and comfort compared to conventional water pump pliers of the same length: offer 9 adjustment positioning for 30% more gripping capacity. Good access to the workpiece due to slim size in the head and joint area. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and reliable gripping. . . . .
This Knipex Cobra series water pump plier set has a length of 7¼ inch, 10 inch, 12 inches and is not insulated. The handle is red and has a dipped style/type. It features self-gripping and meets the standards for ASTM. In addition, it has a atramentized finish, plus it is not non-sparking, and is not tether ready with a plastic standard cushion grip. This water pump plier set includes three water pump pliers.
This Knipex Cobra series water pump plier set has a length of 7¼ inch, 10 inch, 12 inches and is not insulated. The handle is red and has a dipped style/type. It features self-gripping and meets the standards for ASTM. In addition, it has a atramentized finish, plus it is not non-sparking, and is not tether ready with a plastic standard cushion grip. This water pump plier set includes three water pump pliers.
Box-joint design: high stability because of double guide. Reliable catching of the hinge bolt: no unintentional shifting. Pinch guard prevents operators´ fingers being pinched. Chrome vanadium electric steel, forged, oil-hardened.
Box-joint design: high stability because of double guide. Reliable catching of the hinge bolt: no unintentional shifting. Pinch guard prevents operators´ fingers being pinched. Chrome vanadium electric steel, forged, oil-hardened.
This Knipex Alligator series water pump pliers has a length of 16 inch, plus it weighs 2.62 pounds and is not insulated. The handle is red. It features 11 position, box-joint design, pinch guard, self-locking on pipes and nuts and meets the standards for DIN ISO 5743. In addition, it has a atramentized phosphate coat finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This Knipex Alligator series water pump pliers has a length of 16 inch, plus it weighs 2.62 pounds and is not insulated. The handle is red. It features 11 position, box-joint design, pinch guard, self-locking on pipes and nuts and meets the standards for DIN ISO 5743. In addition, it has a atramentized phosphate coat finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This SmartGrip series pliers has a length of 10 inch, plus it weighs 0.825 pounds and is insulated. The handle is red. It features box-joint design, double guide, flush joint bolt, hardened teeth, locking lever, low hand for and more and meets the standards for DIN ISO 8976. In addition, it has a chrome vanadium finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This SmartGrip series pliers has a length of 10 inch, plus it weighs 0.825 pounds and is insulated. The handle is red. It features box-joint design, double guide, flush joint bolt, hardened teeth, locking lever, low hand for and more and meets the standards for DIN ISO 8976. In addition, it has a chrome vanadium finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This tongue and groove pliers has a length of 6 inch, plus it weighs 0.42 pounds and is not insulated. The handle is red/blue. It features box joint, jaw action allows tightening and releasing quickly using ratcheting principle, pus and more and meets the standards for DIN ISO 5743. In addition, it has a chrome-plated finish, plus it is non-sparking, and is not tether ready with a bi-material grip.
This tongue and groove pliers has a length of 6 inch, plus it weighs 0.42 pounds and is not insulated. The handle is red/blue. It features box joint, jaw action allows tightening and releasing quickly using ratcheting principle, pus and more and meets the standards for DIN ISO 5743. In addition, it has a chrome-plated finish, plus it is non-sparking, and is not tether ready with a bi-material grip.
This Knipex Cobra series tongue and groove pliers has a length of 7¼ inch, plus it weighs 0.37 pounds and is not insulated. It features box-joint design, double guide, fine adjustment, gripping surfaces with teeth hardness approx and more and meets the standards for DIN ISO 8976. In addition, it has a atramentized phosphate coat finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This Knipex Cobra series tongue and groove pliers has a length of 7¼ inch, plus it weighs 0.37 pounds and is not insulated. It features box-joint design, double guide, fine adjustment, gripping surfaces with teeth hardness approx and more and meets the standards for DIN ISO 8976. In addition, it has a atramentized phosphate coat finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This Knipex Cobra series tongue and groove pliers has a length of 10 inch, plus it weighs 0.73 pounds and is not insulated. It features box-joint design, double guide, fine adjustment, gripping surfaces with teeth hardness approx and more and meets the standards for DIN ISO 8976. In addition, it has a atramentized phosphate coat finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This Knipex Cobra series tongue and groove pliers has a length of 10 inch, plus it weighs 0.73 pounds and is not insulated. It features box-joint design, double guide, fine adjustment, gripping surfaces with teeth hardness approx and more and meets the standards for DIN ISO 8976. In addition, it has a atramentized phosphate coat finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This tongue and groove pliers has a length of 10 inch, plus it weighs 0.78 pounds and is not insulated. It features box-joint design and meets the standards for DIN ISO 5743. In addition, it has a atramentized phosphate coat finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
This tongue and groove pliers has a length of 10 inch, plus it weighs 0.78 pounds and is not insulated. It features box-joint design and meets the standards for DIN ISO 5743. In addition, it has a atramentized phosphate coat finish, plus it is non-sparking, and is not tether ready with a plastic standard cushion grip.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
