Forets extra-courts en carbure monobloc

This high-performance screw machine drill bit is made of carbide and has a 2.5 mm diameter, 25.40 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has metric measurements. It is non-coolant through with a 46mm length. Plus it has two 21mm spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 2.5 mm diameter, 25.40 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has metric measurements. It is non-coolant through with a 46mm length. Plus it has two 21mm spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 7/32 inch diameter, 28.50 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 2⅜ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 7/32 inch diameter, 28.50 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 2⅜ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 12 mm diameter, 39mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has metric measurements. It is non-coolant through with a 92mm length. Plus it has two 54mm spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 12 mm diameter, 39mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has metric measurements. It is non-coolant through with a 92mm length. Plus it has two 54mm spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 23/64 inch diameter, 33.30 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 3 1/16 inch length. Plus it has two 1¾ inch spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 23/64 inch diameter, 33.30 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 3 1/16 inch length. Plus it has two 1¾ inch spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This general purpose screw machine drill bit is made of carbide and has a 3/32 inch diameter, 25.40 mm long shank. It is for use with aluminum, cast iron, hardened steel, steel. This 220D series screw machine length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 1 13/16 inch length. Plus it has two 13/16 inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This general purpose screw machine drill bit is made of carbide and has a 3/32 inch diameter, 25.40 mm long shank. It is for use with aluminum, cast iron, hardened steel, steel. This 220D series screw machine length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 1 13/16 inch length. Plus it has two 13/16 inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 21/64 inch diameter, 31.70 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 2 15/16 inch length. Plus it has two 1 11/16 inch spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 21/64 inch diameter, 31.70 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 2 15/16 inch length. Plus it has two 1 11/16 inch spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a ½ inch diameter, 38.10 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 3¾ inch length. Plus it has two 2¼ inch spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a ½ inch diameter, 38.10 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 3¾ inch length. Plus it has two 2¼ inch spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This general purpose screw machine drill bit is made of carbide and has a 13/64 inch diameter, 31.70 mm long shank. It is for use with aluminum, cast iron, hardened steel, steel. This 220D series screw machine length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2⅜ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This general purpose screw machine drill bit is made of carbide and has a 13/64 inch diameter, 31.70 mm long shank. It is for use with aluminum, cast iron, hardened steel, steel. This 220D series screw machine length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2⅜ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This general purpose screw machine drill bit is made of carbide and has a 8 mm diameter, 35mm long shank. It is for use with aluminum, cast iron, hardened steel, steel. This 220D series screw machine length drill bit has a bright (uncoated) finish, and has metric measurements. It is non-coolant through with a 92mm length. Plus it has two 60mm spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This general purpose screw machine drill bit is made of carbide and has a 8 mm diameter, 35mm long shank. It is for use with aluminum, cast iron, hardened steel, steel. This 220D series screw machine length drill bit has a bright (uncoated) finish, and has metric measurements. It is non-coolant through with a 92mm length. Plus it has two 60mm spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This general purpose screw machine drill bit is made of carbide and has a ¼ inch diameter, 34.90 mm long shank. It is for use with aluminum, cast iron, hardened steel, steel. This 220D series screw machine length drill bit has a bright (uncoated) finish, and has letter measurements. It is non-coolant through with a 2⅝ inch length. Plus it has two 1 7/16 inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This general purpose screw machine drill bit is made of carbide and has a ¼ inch diameter, 34.90 mm long shank. It is for use with aluminum, cast iron, hardened steel, steel. This 220D series screw machine length drill bit has a bright (uncoated) finish, and has letter measurements. It is non-coolant through with a 2⅝ inch length. Plus it has two 1 7/16 inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This general purpose screw machine drill bit is made of carbide and has a 27/64 inch diameter, 41.30 mm long shank. It is for use with aluminum, cast iron, hardened steel, steel. This 220D series screw machine length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 4½ inch length. Plus it has two 2⅞ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This general purpose screw machine drill bit is made of carbide and has a 27/64 inch diameter, 41.30 mm long shank. It is for use with aluminum, cast iron, hardened steel, steel. This 220D series screw machine length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 4½ inch length. Plus it has two 2⅞ inch spiral flutes, a straight shank, and 118 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 1½ inch diameter, 25.40 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has metric measurements. It is non-coolant through with a 38mm length. Plus it has two 13mm spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 1½ inch diameter, 25.40 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has metric measurements. It is non-coolant through with a 38mm length. Plus it has two 13mm spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 3.5 mm diameter, 25.40 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has metric measurements. It is non-coolant through with a 52mm length. Plus it has two 24mm spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 3.5 mm diameter, 25.40 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has metric measurements. It is non-coolant through with a 52mm length. Plus it has two 24mm spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 3/16 inch diameter, 27mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1 3/16 inch spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 3/16 inch diameter, 27mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1 3/16 inch spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 11.5 mm diameter, 36mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has metric measurements. It is non-coolant through with a 90mm length. Plus it has two 54mm spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 11.5 mm diameter, 36mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has metric measurements. It is non-coolant through with a 90mm length. Plus it has two 54mm spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 3/32 inch diameter, 25.40 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 1¾ inch length. Plus it has two ¾ inch spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.

This high-performance screw machine drill bit is made of carbide and has a 3/32 inch diameter, 25.40 mm long shank. It is for use with aluminum, cast iron, nickel, steel, titanium, tool and die steel. This 215 series screw machine length drill bit has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through with a 1¾ inch length. Plus it has two ¾ inch spiral flutes, a straight shank, and 135 Degrees 4 facet point drill point.