Product ITEM is unavailable. See products from the same category below.
Manches résistantes aux coupures
Les manchettes résistantes aux coupures protègent les bras contre entailles, abrasions et lacérations. Elles sont souvent portées avec des gants anti-coupures, prolongeant la protection du poignet jusqu'au coude ou à l'épaule. Elles sont testées pour répondre à la norme ANSI/ISEA 105 et servent aux travailleurs confrontés à des risques de coupure: ouvriers de l'automobile et des chaînes de montage, agents d'entretien, de recyclage et d’assainissement, métallurgistes, etc. Les manchettes ayant un degré de protection bas offrent une plus grande aisance de mouvement et plus de confort que celles avec un indice élevé.
Manche CutPro Hero 9318K verte résistante aux coupures grise taille universelle homologuée ANSI/ISEA niveau 6 résistance aux coupures/niveau 0 résistance aux perforations. Elle est composée de Kevlar en tricot sans couture avec une manchette à enfiler serrée, et a une longueur de 18 pouces. Conforme aux normes ANSI/ISEA 105.
Manche CutPro Hero 9318K verte résistante aux coupures grise taille universelle homologuée ANSI/ISEA niveau 6 résistance aux coupures/niveau 0 résistance aux perforations. Elle est composée de Kevlar en tricot sans couture avec une manchette à enfiler serrée, et a une longueur de 18 pouces. Conforme aux normes ANSI/ISEA 105.
This CutPro 9372T yellow cut-resistant sleeve is universal size and is rated ANSI/ISEA Cut Level A3. It is made of Kevlar with a shirred slip-on cuff, and has an 12-inch length. It meets the standards for ANSI/ISEA 105.
This CutPro 9372T yellow cut-resistant sleeve is universal size and is rated ANSI/ISEA Cut Level A3. It is made of Kevlar with a shirred slip-on cuff, and has an 12-inch length. It meets the standards for ANSI/ISEA 105.
This CutPro 9318D grey cut-resistant sleeve is universal size and is rated ANSI/ISEA Cut Level A2. It is made of HPPE seamless knit Dyneema Diamond with a shirred slip-on cuff, and has an 18-inch length. It meets the standards for ANSI/ISEA 105.
This CutPro 9318D grey cut-resistant sleeve is universal size and is rated ANSI/ISEA Cut Level A2. It is made of HPPE seamless knit Dyneema Diamond with a shirred slip-on cuff, and has an 18-inch length. It meets the standards for ANSI/ISEA 105.
This high-visibility orange sleeve, made from seven-gauge Kevlar yarn, is 18 inches long. It offers cut and thermal protection, a thumb slot, and has a two-ply seamless knit.
This high-visibility orange sleeve, made from seven-gauge Kevlar yarn, is 18 inches long. It offers cut and thermal protection, a thumb slot, and has a two-ply seamless knit.
This CutPro 9371T yellow cut-resistant sleeve is universal size and is rated ANSI/ISEA Cut Level A3. It is made of seamless knit Kevlar with a shirred slip-on cuff, and has a 10-inch length. It meets the standards for ANSI/ISEA 105.
This CutPro 9371T yellow cut-resistant sleeve is universal size and is rated ANSI/ISEA Cut Level A3. It is made of seamless knit Kevlar with a shirred slip-on cuff, and has a 10-inch length. It meets the standards for ANSI/ISEA 105.
This CutPro Hero 9318KT green cut-resistant sleeve is universal size and is rated ANSI/ISEA Cut Level A6/ANSI/ISEA Puncture Level 0. It is made of seamless knit Kevlar with a shirred slip-on cuff, and has an 18-inch length. It meets the standards for ANSI/ISEA 105.
This CutPro Hero 9318KT green cut-resistant sleeve is universal size and is rated ANSI/ISEA Cut Level A6/ANSI/ISEA Puncture Level 0. It is made of seamless knit Kevlar with a shirred slip-on cuff, and has an 18-inch length. It meets the standards for ANSI/ISEA 105.
This high-visibility orange sleeve, made from seven-gauge Kevlar yarn, is 18 inches long. It offers cut and thermal protection and has a two-ply seamless knit.
This high-visibility orange sleeve, made from seven-gauge Kevlar yarn, is 18 inches long. It offers cut and thermal protection and has a two-ply seamless knit.
This CutPro 9374T yellow cut-resistant sleeve is universal size and is rated ANSI/ISEA Cut Level A3. It is made of Kevlar with a shirred slip-on cuff, and has an 14-inch length. It meets the standards for ANSI/ISEA 105.
This CutPro 9374T yellow cut-resistant sleeve is universal size and is rated ANSI/ISEA Cut Level A3. It is made of Kevlar with a shirred slip-on cuff, and has an 14-inch length. It meets the standards for ANSI/ISEA 105.
This 9314D grey cut-resistant sleeve is universal size and is rated ANSI/ISEA Cut Level A2/ANSI/ISEA Puncture Level 0. It is made of Dyneema seamless knit Dyneema Diamond with a shirred slip-on cuff, and has an 14-inch length. It meets the standards for ANSI/ISEA 105.
This 9314D grey cut-resistant sleeve is universal size and is rated ANSI/ISEA Cut Level A2/ANSI/ISEA Puncture Level 0. It is made of Dyneema seamless knit Dyneema Diamond with a shirred slip-on cuff, and has an 14-inch length. It meets the standards for ANSI/ISEA 105.
This yellow cut-resistant sleeve is rated ANSI/ISEA Cut Level A3. It is made of Kevlar, and has an 18-inch length. It meets the standards for ANSI/ISEA 105. Protective sleeves protect arms from cuts, chemical splash, dirt, and light abrasion. Sleeves start at the wrist and move up the arm and are often worn to extend glove coverage.
This yellow cut-resistant sleeve is rated ANSI/ISEA Cut Level A3. It is made of Kevlar, and has an 18-inch length. It meets the standards for ANSI/ISEA 105. Protective sleeves protect arms from cuts, chemical splash, dirt, and light abrasion. Sleeves start at the wrist and move up the arm and are often worn to extend glove coverage.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
