Usinage
Perçage
Forets
Forets pour le métal et le plastique
Forets courts
Forets courts en cobalt
Close

Filter Results By

Applied Filters

Clear All

Marque
CLEVELAND

Search within these results

Magasiner Par

In Stock Now (28)

Marque

BOSCH BOSCH (1)
CHICAGO-LATROBE CHICAGO-LATROBE (950)
CLARKSON-OSBORN CLARKSON-OSBORN (69)
CLE-LINE CLE-LINE (104)
CLEVELAND CLEVELAND (711)
DEWALT DEWALT (5)
DRILLCO (129)

JET (13)

MILWAUKEE (2)

OSG (49)

WALTER SURFACE TECHNOLOGIES (95)

WESTWARD (87)
View more View less

Prix

Moins de 10$ Moins de 10$ (190)
10$ à 15$ 10$ à 15$ (86)
15$ à 20$ 15$ à 20$ (78)
20$ à 25$ 20$ à 25$ (84)
25$ à 30$ 25$ à 30$ (67)
30$ à 35$ 30$ à 35$ (39)
35$ à 40$ (26)

40$ à 50$ (58)

50$ à 60$ (24)

60$ à 70$ (16)

70$ à 80$ (10)

80$ à 90$ (12)

90$ à 100$ (6)

100$ à 200$ (15)
View more View less

Système de mesure

Fil Fil (310)
Lettre Lettre (101)
Métrique Métrique (143)
Pouce (fraction) Pouce (fraction) (157)

Taille de foret

1,00 mm 1,00 mm (1)
1,10 mm 1,10 mm (1)
1,20 mm 1,20 mm (1)
1,30 mm 1,30 mm (1)
1,40 mm 1,40 mm (1)
1,50 mm 1,50 mm (4)
1,60 mm (3)

1,70 mm (1)

1,80 mm (1)

1,90 mm (1)

1/16 po (6)

1/2 po (6)

1/4 po (6)

1/64 po (1)

1/8 po (6)

10,00 mm (4)

10,20 mm (2)

10,50 mm (1)

10,80 mm (1)

11,00 mm (4)

11,50 mm (1)

11/32 po (6)

11/64 po (5)

12,00 mm (4)

12,25 mm (1)

12,50 mm (3)

13,00 mm (3)

13/32 po (4)

13/64 po (6)

15/32 po (4)

15/64 po (6)

17/64 po (6)

19/64 po (4)

2,00 mm (4)

2,10 mm (1)

2,20 mm (1)

2,30 mm (1)

2,40 mm (1)

2,50 mm (4)

2,60 mm (1)

2,70 mm (1)

2,80 mm (1)

2,90 mm (3)

21/64 po (4)

23/64 po (4)

25/64 po (4)

27/64 po (4)

29/64 po (4)

3,00 mm (4)

3,10 mm (1)

3,20 mm (1)

3,30 mm (3)

3,40 mm (1)

3,50 mm (4)

3,60 mm (1)

3,70 mm (1)

3,80 mm (1)

3,90 mm (1)

3/16 po (6)

3/32 po (6)

3/64 po (2)

3/8 po (6)

31/64 po (4)

4,00 mm (4)

4,10 mm (1)

4,20 mm (3)

4,30 mm (1)

4,40 mm (1)

4,50 mm (4)

4,60 mm (1)

4,90 mm (1)

5,00 mm (4)

5,10 mm (1)

5,20 mm (1)

5,30 mm (1)

5,40 mm (1)

5,50 mm (4)

5,60 mm (1)

5,70 mm (1)

5,80 mm (1)

5/16 po (6)

5/32 po (6)

5/64 po (6)

6,00 mm (4)

6,10 mm (1)

6,20 mm (1)

6,30 mm (1)

6,40 mm (1)

6,50 mm (4)

6,60 mm (1)

6,70 mm (1)

6,80 mm (3)

7,00 mm (5)

7,20 mm (1)

7,50 mm (1)

7,80 mm (1)

7/16 po (6)

7/32 po (6)

7/64 po (6)

8,00 mm (4)

8,10 mm (1)

8,50 mm (1)

8,70 mm (1)

9,00 mm (4)

9,50 mm (1)

9/32 po (6)

9/64 po (5)

A (4)

B (4)

C (4)

D (4)

F (4)

G (8)

H (4)

I (5)

J (4)

K (4)

M (4)

N (4)

No. 1 (5)

No. 10 (5)

No. 11 (5)

No. 12 (6)

No. 13 (6)

No. 14 (3)

No. 15 (7)

No. 16 (5)

No. 17 (5)

No. 18 (5)

No. 19 (5)

No. 2 (5)

No. 20 (5)

No. 21 (6)

No. 22 (5)

No. 23 (5)

No. 24 (5)

No. 25 (5)

No. 26 (5)

No. 27 (5)

No. 28 (5)

No. 29 (6)

No. 3 (5)

No. 30 (6)

No. 31 (5)

No. 32 (5)

No. 33 (5)

No. 34 (5)

No. 35 (5)

No. 36 (6)

No. 37 (5)

No. 38 (5)

No. 39 (6)

No. 4 (6)

No. 40 (6)

No. 41 (6)

No. 42 (5)

No. 43 (6)

No. 44 (5)

No. 45 (5)

No. 46 (5)

No. 47 (5)

No. 48 (5)

No. 49 (5)

No. 5 (5)

No. 50 (5)

No. 51 (5)

No. 52 (5)

No. 53 (2)

No. 54 (2)

No. 55 (2)

No. 56 (2)

No. 57 (2)

No. 58 (2)

No. 59 (2)

No. 6 (6)

No. 60 (2)

No. 61 (1)

No. 62 (1)

No. 63 (1)

No. 64 (1)

No. 65 (1)

No. 66 (1)

No. 67 (1)

No. 68 (2)

No. 69 (1)

No. 7 (6)

No. 70 (1)

No. 71 (1)

No. 72 (1)

No. 73 (1)

No. 74 (1)

No. 75 (1)

No. 76 (1)

No. 77 (1)

No. 78 (1)

No. 79 (1)

No. 8 (5)

No. 80 (1)

No. 9 (5)

O (8)

P (8)

Q (4)

R (4)

T (4)

U (4)

V (4)

W (4)

X (4)

Z (4)
View more View less

Équivalent décimal

0,0135 po 0,0135 po (1)
0,0145 po 0,0145 po (1)
0,0156 po 0,0156 po (1)
0,0160 po 0,0160 po (1)
0,0180 po 0,0180 po (1)
0,0200 po 0,0200 po (1)
0,0210 po (1)

0,0225 po (1)

0,0240 po (1)

0,0250 po (1)

0,0260 po (1)

0,0280 po (1)

0,0292 po (1)

0,0310 po (2)

0,0320 po (1)

0,0330 po (1)

0,0350 po (1)

0,0360 po (1)

0,0370 po (1)

0,0380 po (1)

0,0390 po (1)

0,0394 po (1)

0,0400 po (2)

0,0410 po (2)

0,0420 po (2)

0,0430 po (2)

0,0433 po (1)

0,0465 po (2)

0,0469 po (2)

0,0472 po (1)

0,0512 po (1)

0,0520 po (2)

0,0550 po (2)

0,0551 po (1)

0,0591 po (4)

0,0595 po (2)

0,0625 po (6)

0,0630 po (3)

0,0635 po (5)

0,0669 po (1)

0,0670 po (5)

0,0700 po (5)

0,0709 po (1)

0,0730 po (5)

0,0748 po (1)

0,0760 po (5)

0,0781 po (6)

0,0785 po (5)

0,0787 po (4)

0,0810 po (5)

0,0820 po (5)

0,0827 po (1)

0,0860 po (5)

0,0866 po (1)

0,0890 po (6)

0,0906 po (1)

0,0935 po (5)

0,0938 po (6)

0,0945 po (1)

0,0960 po (6)

0,098 po (1)

0,0980 po (5)

0,0984 po (4)

0,0995 po (6)

0,1015 po (5)

0,1024 po (1)

0,1040 po (5)

0,1063 po (1)

0,1065 po (6)

0,1094 po (6)

0,1100 po (5)

0,1102 po (1)

0,1110 po (5)

0,1130 po (5)

0,1142 po (3)

0,1160 po (5)

0,1181 po (4)

0,1200 po (5)

0,1220 po (1)

0,1250 po (6)

0,1260 po (1)

0,1285 po (6)

0,1299 po (3)

0,1339 po (1)

0,1360 po (6)

0,1378 po (4)

0,1405 po (5)

0,1406 po (5)

0,1417 po (1)

0,1440 po (5)

0,1457 po (1)

0,1470 po (5)

0,1495 po (5)

0,1496 po (1)

0,1520 po (5)

0,1535 po (1)

0,1540 po (5)

0,1563 po (6)

0,1570 po (5)

0,1575 po (4)

0,1590 po (6)

0,1610 po (5)

0,1614 po (1)

0,1654 po (3)

0,1660 po (5)

0,1693 po (1)

0,1695 po (5)

0,1719 po (5)

0,1730 po (5)

0,1732 po (1)

0,1770 po (5)

0,1772 po (4)

0,1800 po (7)

0,1811 po (1)

0,1820 po (3)

0,1850 po (6)

0,1875 po (6)

0,1890 po (6)

0,1910 po (5)

0,1929 po (1)

0,1935 po (5)

0,1960 po (5)

0,1969 po (4)

0,1990 po (5)

0,2008 po (1)

0,2010 po (6)

0,2031 po (6)

0,2040 po (6)

0,2047 po (1)

0,2055 po (5)

0,2087 po (1)

0,2090 po (6)

0,2126 po (1)

0,2130 po (5)

0,2165 po (4)

0,2188 po (6)

0,2205 po (1)

0,2210 po (5)

0,2244 po (1)

0,2280 po (5)

0,2283 po (1)

0,2340 po (4)

0,2344 po (6)

0,2362 po (4)

0,2380 po (4)

0,2402 po (1)

0,2420 po (4)

0,2441 po (1)

0,2460 po (4)

0,2480 po (1)

0,2500 po (6)

0,2520 po (1)

0,2559 po (4)

0,2570 po (4)

0,2598 po (1)

0,2610 po (4)

0,2638 po (1)

0,2656 po (6)

0,2660 po (4)

0,2677 po (3)

0,2720 po (5)

0,2756 po (5)

0,2770 po (4)

0,2810 po (4)

0,2813 po (6)

0,2835 po (1)

0,2900 po (4)

0,2950 po (4)

0,2953 po (1)

0,2969 po (4)

0,3020 po (4)

0,3071 po (1)

0,3125 po (6)

0,3150 po (4)

0,3160 po (4)

0,3189 po (1)

0,3230 po (4)

0,3281 po (4)

0,3320 po (4)

0,3346 po (1)

0,3390 po (4)

0,3425 po (1)

0,3438 po (6)

0,3480 po (4)

0,3543 po (4)

0,3580 po (4)

0,3594 po (4)

0,3680 po (4)

0,3740 po (1)

0,3750 po (6)

0,3770 po (4)

0,3860 po (4)

0,3906 po (4)

0,3937 po (4)

0,3970 po (4)

0,4016 po (2)

0,4040 po (4)

0,4063 po (4)

0,4130 po (4)

0,4134 po (1)

0,4219 po (4)

0,4252 po (1)

0,4331 po (4)

0,4375 po (6)

0,4528 po (1)

0,4531 po (4)

0,4688 po (4)

0,4724 po (4)

0,4823 po (1)

0,4844 po (4)

0,4921 po (3)

0,5000 po (6)

0,5118 po (3)
View more View less

Finition - usinage

Oxyde noir Oxyde noir (115)
Paille Paille (1)
Paille/bronze Paille/bronze (345)
TiAlN TiAlN (95)
TiCN TiCN (55)
TiN TiN (100)

Normes

ANSI ANSI (2)
ASME B94.11M ASME B94.11M (304)
ASME B94.11M, DIN 338 ASME B94.11M, DIN 338 (1)
ASME B94.11M-1993 ASME B94.11M-1993 (25)
Aucune classification Aucune classification (117)
DIN 338 DIN 338 (48)
NAS 907 type D (2)

NAS 907 type J (212)
View more View less

Direction de coupe

Droite Droite (710)
Droitier Droitier (1)

Type de goujure

Hélicoïdale Hélicoïdale (328)
Parabolique Parabolique (383)

Longueur de goujure

1 3/8 po 1 3/8 po (1)
1 po 1 po (31)
1-1/16 po 1-1/16 po (6)
1-1/2 po 1-1/2 po (22)
1-1/4 po 1-1/4 po (19)
1-1/8 po 1-1/8 po (18)
1-11/16 po (6)

1-13/16 po (2)

1-15/16 po (3)

1-3/16 po (7)

1-3/4 po (16)

1-3/8 po (18)

1-5/16 po (4)

1-5/8 po (18)

1-7/16 po (16)

1-7/8 po (15)

1-9/16 po (5)

1/2 po (11)

1/4 po (2)

1/8 po (2)

101,00 mm (10)

11/16 po (11)

12,00 mm (1)

13/16 po (7)

14,00 mm (1)

15/16 po (4)

16,00 mm (2)

18,00 mm (5)

2 po (19)

2-1/16 po (1)

2-1/2 po (23)

2-1/4 po (1)

2-1/8 po (23)

2-15/16 po (11)

2-3/16 po (17)

2-3/4 po (14)

2-5/16 po (17)

2-5/8 po (16)

2-7/16 po (22)

2-7/8 po (20)

20,00 mm (4)

22,00 mm (2)

24,00 mm (5)

27,00 mm (2)

3,9764 po (1)

3-1/16 po (9)

3-1/2 po (9)

3-15/16 po (3)

3-3/16 po (8)

3-3/4 po (9)

3-5/16 po (6)

3-5/8 po (11)

3-7/16 po (11)

3-7/8 po (9)

3/16 po (4)

3/4 po (9)

3/8 po (2)

30,00 mm (6)

33,00 mm (9)

36,00 mm (5)

39,00 mm (7)

4-1/16 po (5)

4-1/2 po (5)

4-3/16 po (3)

4-3/8 po (3)

4-5/16 po (3)

43,00 mm (10)

47,00 mm (8)

5/16 po (2)

5/8 po (8)

52,00 mm (9)

57,00 mm (12)

63,00 mm (10)

69,00 mm (11)

7/8 po (18)

75,00 mm (7)

81,00 mm (6)

87,00 mm (7)

94,00 mm (6)
View more View less

Diamètre de tige

1 mm 1 mm (1)
1-1/2 po 1-1/2 po (4)
1-11/16 po 1-11/16 po (1)
1-19/32 po 1-19/32 po (3)
1-19/64 po 1-19/64 po (1)
1-25/64 po 1-25/64 po (1)
1-3/16 po (1)

1-3/32 po (1)

1-51/64 po (1)

1-57/64 po (1)

1/16 po (37)

1/2 po (6)

1/32 po (18)

1/4 po (20)

1/64 po (14)

1/8 po (28)

10 mm (4)

10,2 mm (2)

10,5 mm (1)

10,8 mm (1)

11 mm (4)

11,5 mm (1)

11/32 po (14)

11/64 po (30)

12 mm (4)

12,5 mm (3)

13 mm (3)

13/32 po (4)

13/64 po (22)

15/32 po (5)

15/64 po (18)

17/64 po (22)

19/64 po (8)

2 mm (4)

2,1 mm (1)

2,2 mm (1)

2,3 mm (1)

2,4 mm (1)

2,5 mm (4)

2,6 mm (1)

2,7 mm (1)

2,8 mm (1)

2,9 mm (3)

21/64 po (8)

23/64 po (8)

25/64 po (12)

27/64 po (4)

3 mm (4)

3,1 mm (1)

3,2 mm (1)

3,3 mm (3)

3,4 mm (1)

3,5 mm (4)

3,6 mm (1)

3,7 mm (1)

3,8 mm (1)

3,9 mm (1)

3/16 po (43)

3/32 po (40)

3/64 po (8)

3/8 po (18)

31/64 po (4)

4 mm (4)

4,1 mm (1)

4,2 mm (3)

4,3 mm (1)

4,4 mm (1)

4,5 mm (4)

4,6 mm (1)

4,7 mm (1)

4,8 mm (1)

4,9 mm (1)

5 mm (4)

5,1 mm (1)

5,2 mm (1)

5,3 mm (1)

5,4 mm (1)

5,5 mm (4)

5,6 mm (1)

5,7 mm (1)

5,8 mm (1)

5/16 po (18)

5/32 po (26)

5/64 po (31)

6 mm (4)

6,1 mm (1)

6,2 mm (1)

6,3 mm (1)

6,4 mm (1)

6,5 mm (4)

6,6 mm (1)

6,7 mm (1)

6,8 mm (4)

7 mm (5)

7,2 mm (1)

7,5 mm (1)

7,8 mm (1)

7/16 po (10)

7/32 po (20)

7/64 po (31)

8 mm (4)

8,1 mm (1)

8,5 mm (1)

8,7 mm (1)

9 mm (4)

9,5 mm (1)

9/32 po (8)

9/64 po (31)
View more View less

Longueur hors tout

1 po 1 po (2)
1-1/2 po 1-1/2 po (4)
1-1/4 po 1-1/4 po (2)
1-1/8 po 1-1/8 po (2)
1-3/4 po 1-3/4 po (6)
1-3/8 po 1-3/8 po (5)
1-5/8 po (7)

1-7/8 po (17)

101,00 mm (10)

109,00 mm (11)

117,00 mm (7)

125,00 mm (6)

133,00 mm (7)

142,00 mm (6)

151,00 mm (11)

2 3/8 po (1)

2 po (31)

2-1/2 po (16)

2-1/4 po (17)

2-1/8 po (15)

2-3/4 po (22)

2-3/8 po (17)

2-5/8 po (21)

2-7/8 po (16)

3 po (15)

3-1/2 po (21)

3-1/4 po (26)

3-1/8 po (21)

3-3/4 po (28)

3-3/8 po (20)

3-5/8 po (27)

3-7/8 po (20)

3/4 po (3)

34,00 mm (1)

36,00 mm (1)

38,00 mm (2)

4 po (18)

4-1/2 po (10)

4-1/4 po (14)

4-1/8 po (26)

4-3/4 po (14)

4-3/8 po (12)

4-5/8 po (8)

4-7/8 po (12)

40,00 mm (5)

43,00 mm (4)

46,00 mm (2)

49,00 mm (5)

5 po (14)

5-1/2 po (6)

5-1/4 po (12)

5-1/8 po (12)

5-3/4 po (4)

5-3/8 po (4)

5-5/8 po (4)

5-7/8 po (4)

53,00 mm (2)

57,00 mm (6)

6 po (6)

61,00 mm (9)

65,00 mm (5)

7/8 po (3)

70,00 mm (7)

75,00 mm (10)

80,00 mm (8)

86,00 mm (9)

93,00 mm (12)
View more View less

Application - matière principale

Acier Acier (101)
Aluminium et matériau non ferreux Aluminium et matériau non ferreux (53)
Aluminium, laiton, bronze, cuivre, acier Aluminium, laiton, bronze, cuivre, acier (54)
Aluminium, laiton, bronze, cuivre, acier inoxydable, acier Aluminium, laiton, bronze, cuivre, acier inoxydable, acier (212)
Aluminium, laiton, bronze, fonte, cuivre, acier inoxydable, acier Aluminium, laiton, bronze, fonte, cuivre, acier inoxydable, acier (81)
Aluminium, laiton, bronze, fonte, cuivre, nickel, acier inoxydable, acier, titanium Aluminium, laiton, bronze, fonte, cuivre, nickel, acier inoxydable, acier, titanium (86)
Fonte, acier inoxydable (95)

Fonte, nickel, acier inoxydable, acier, titanium (29)
View more View less

Forets courts en cobalt

Forets longueur intermédiaire en cobalt tolérant des vitesses de forage plus élevées, plus durs et plus résistants à l'usure que ceux en acier rapide. Absorption des chocs, et possibilité d’utilisation dans outils électriques portables. Les forets longueur courte sont les plus souvent utilisés. Ils offrent un bon équilibre entre résistance et précision lors du perçage de matériaux divers.

https://catalogue.grainger.ca/?hybris=true

711 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

CLEVELAND
FORET COURT A LARGES GOUJURES, 2075
Item # GNF2075C16561
Mfr. Model # C16561

EHC: EHC :

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 10 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $16.78 / CHAQUE

EHC: EHC :

Qty:

FORET COURT, FORET 3,3 MM, CANNELURE 36 MM L, 65 MM L, 4XD, DROIT

CLEVELAND
FORET COURT, FORET 3,3 MM, CANNELURE 36 MM L, 65 MM L, 4XD, DROIT
Item # GNF2213C70080
Mfr. Model # C70080

EHC: EHC :

Ce foret court en cobalt M42 a un diamètre de 3,3 mm et une tige de 29 mm de long. Pour l’aluminium, le laiton et plus: répond aux normes NAS 907 Type J. Ce foret de la série 2213 a une finition paille/bronze, et est métrique. Ce foret est sans canal de refroidissement et mesure 65 mm de long. De plus, il a deux cannelures hélicoïdales de 36 mm, une tige droite et un angle de pointe de 135°.

Ce foret court en cobalt M42 a un diamètre de 3,3 mm et une tige de 29 mm de long. Pour l’aluminium, le laiton et plus: répond aux normes NAS 907 Type J. Ce foret de la série 2213 a une finition paille/bronze, et est métrique. Ce foret est sans canal de refroidissement et mesure 65 mm de long. De plus, il a deux cannelures hélicoïdales de 36 mm, une tige droite et un angle de pointe de 135°.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $5.97 / CHAQUE

EHC: EHC :

Qty:

FORET COURT, FORET 4,1 MM, CANNELURE 43 MM LO, 75 MM LO, DROIT

CLEVELAND
FORET COURT, FORET 4,1 MM, CANNELURE 43 MM LO, 75 MM LO, DROIT
Item # GNF2213C70088
Mfr. Model # C70088

EHC: EHC :

Ce foret court en cobalt M42 a un diamètre de 4,1 mm/une tige de 32 mm de long. Pour l’aluminium, le laiton et plus: répond aux normes NAS 907 Type J. Ce foret de la série 2213 a une finition paille/bronze, et est métrique. Il est sans canal de refroidissement et mesure 75 mm de long. De plus, il a deux cannelures hélicoïdales de 43 mm, une tige droite et un angle de pointe de 135°.

Ce foret court en cobalt M42 a un diamètre de 4,1 mm/une tige de 32 mm de long. Pour l’aluminium, le laiton et plus: répond aux normes NAS 907 Type J. Ce foret de la série 2213 a une finition paille/bronze, et est métrique. Il est sans canal de refroidissement et mesure 75 mm de long. De plus, il a deux cannelures hélicoïdales de 43 mm, une tige droite et un angle de pointe de 135°.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $7.50 / CHAQUE

EHC: EHC :

Qty:

FORET COURT, FORET 7,2 MM, CANNELURE 69 MM L, 109 MM L, DROIT

CLEVELAND
FORET COURT, FORET 7,2 MM, CANNELURE 69 MM L, 109 MM L, DROIT
Item # GNF2213C70116
Mfr. Model # C70116

EHC: EHC :

Ce foret court en cobalt M42 a un diamètre de 7,2 mm/une tige longue de 40 mm. Pour l’aluminium, le laiton et plus: répond aux normes NAS 907 Type J. Ce foret de la série 2213 a une finition paille/bronze, et est métrique. Il est sans canal de refroidissement et a 109 mm de long. De plus, il a deux cannelures hélicoïdales de 69 mm, une tige droite et un angle de pointe de 135°.

Ce foret court en cobalt M42 a un diamètre de 7,2 mm/une tige longue de 40 mm. Pour l’aluminium, le laiton et plus: répond aux normes NAS 907 Type J. Ce foret de la série 2213 a une finition paille/bronze, et est métrique. Il est sans canal de refroidissement et a 109 mm de long. De plus, il a deux cannelures hélicoïdales de 69 mm, une tige droite et un angle de pointe de 135°.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $15.62 / CHAQUE

EHC: EHC :

Qty:

FORET COURT, FORET NO 18, CANNELURE 2⅛ PO LONG, 3¼ PO LO, 10XD, DROITIER

CLEVELAND
FORET COURT, FORET NO 18, CANNELURE 2⅛ PO LONG, 3¼ PO LO, 10XD, DROITIER
Item # GNF2075C16520
Mfr. Model # C16520

EHC: EHC :

Ce foret court au cobalt M42 a un diamètre de 5/32 po/une tige de 1 1/8 po de long. Pour l'aluminium, le laiton, le bronze, la fonte, le cuivre et l'acier. Ce foret de la série 2075 a une finition paille/bronze, et des mesures de fil. Il est sans canal de refroidissement et mesure 3 1/4 po de long. De plus, il possède deux cannelures paraboliques de 2 1/8 po, une tige droite et un angle de pointe de 135°.

Ce foret court au cobalt M42 a un diamètre de 5/32 po/une tige de 1 1/8 po de long. Pour l'aluminium, le laiton, le bronze, la fonte, le cuivre et l'acier. Ce foret de la série 2075 a une finition paille/bronze, et des mesures de fil. Il est sans canal de refroidissement et mesure 3 1/4 po de long. De plus, il possède deux cannelures paraboliques de 2 1/8 po, une tige droite et un angle de pointe de 135°.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 10 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $19.07 / CHAQUE

EHC: EHC :

Qty:

FORET COURT, FORET NO 42, CANNELURE 1¼ PO LO, 2¼ PO LONG, 10XD, DROITIER

CLEVELAND
FORET COURT, FORET NO 42, CANNELURE 1¼ PO LO, 2¼ PO LONG, 10XD, DROITIER
Item # GNF2075C16544
Mfr. Model # C16544

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 5/64 inch diameter, one-inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, and steel. This 2075 series jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1¼ inch parabolic flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 5/64 inch diameter, one-inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, and steel. This 2075 series jobber length drill bit has a straw/bronze finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1¼ inch parabolic flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 10 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $13.76 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 5.2MM DRILL BIT SIZE, 52MM FLUTE L, 86MM OVERALL L, 4XD, RH

CLEVELAND
JOBBER LENGTH DRILL BIT, 5.2MM DRILL BIT SIZE, 52MM FLUTE L, 86MM OVERALL L, 4XD, RH
Item # GNF2213C70099
Mfr. Model # C70099

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 5.2 mm diameter, 34 mm long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 86mm length. Plus it has two 52mm spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 5.2 mm diameter, 34 mm long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 86mm length. Plus it has two 52mm spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $9.90 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 11.5MM DRILL BIT SIZE, 94MM FLUTE L, 142MM OVERALL L, RH

CLEVELAND
JOBBER LENGTH DRILL BIT, 11.5MM DRILL BIT SIZE, 94MM FLUTE L, 142MM OVERALL L, RH
Item # GNF2213C70130
Mfr. Model # C70130

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 11.5 mm diameter, 48 mm long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 142mm length. Plus it has two 94mm spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 11.5 mm diameter, 48 mm long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 142mm length. Plus it has two 94mm spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 6 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $42.50 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 11MM DRILL BIT SIZE, 94MM FLUTE L, 142MM OVERALL L, RH

CLEVELAND
JOBBER LENGTH DRILL BIT, 11MM DRILL BIT SIZE, 94MM FLUTE L, 142MM OVERALL L, RH
Item # GNF2213C70129
Mfr. Model # C70129

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 11 mm diameter, 48 mm long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 142mm length. Plus it has two 94mm spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 11 mm diameter, 48 mm long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 142mm length. Plus it has two 94mm spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 6 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $34.43 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, #40 DRILL BIT SIZE, 1⅜ IN FLUTE L, 2⅜ IN L, 10XD, RIGHT HAND

CLEVELAND
JOBBER LENGTH DRILL BIT, #40 DRILL BIT SIZE, 1⅜ IN FLUTE L, 2⅜ IN L, 10XD, RIGHT HAND
Item # GNF2075TAC16977
Mfr. Model # C16977

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 3/32 inch diameter, one-inch long shank. It is for use with cast iron, stainless steel, and meets ASME standards. This 2075-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 2⅜ inch length. Plus it has two 1⅜ inch parabolic flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 3/32 inch diameter, one-inch long shank. It is for use with cast iron, stainless steel, and meets ASME standards. This 2075-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 2⅜ inch length. Plus it has two 1⅜ inch parabolic flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 10 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $21.23 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 21/64 IN DRILL BIT SIZE, 3-5/16 IN FLUTE L, 4⅝ IN L, RH

CLEVELAND
JOBBER LENGTH DRILL BIT, 21/64 IN DRILL BIT SIZE, 3-5/16 IN FLUTE L, 4⅝ IN L, RH
Item # GNF2213C70020
Mfr. Model # C70020

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 5/16 inch diameter, 1 5/16 inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 4⅝ inch length. Plus it has two 3 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 5/16 inch diameter, 1 5/16 inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 4⅝ inch length. Plus it has two 3 5/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 6 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $18.60 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 8.7MM DRILL BIT SIZE, 81MM FLUTE L, 125MM OVERALL L, RH

CLEVELAND
JOBBER LENGTH DRILL BIT, 8.7MM DRILL BIT SIZE, 81MM FLUTE L, 125MM OVERALL L, RH
Item # GNF2075C15573
Mfr. Model # C15573

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 8.7 mm diameter, 44 mm long shank. It is for use with aluminum and non-ferrous material, and meets the standards for DIN 338. This 2075 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 125mm length. Plus it has two 81mm parabolic flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 8.7 mm diameter, 44 mm long shank. It is for use with aluminum and non-ferrous material, and meets the standards for DIN 338. This 2075 series jobber length drill bit has a straw/bronze finish, and has metric measurements. It is non-coolant through with a 125mm length. Plus it has two 81mm parabolic flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 5 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $59.20 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, #43 DRILL BIT SIZE, 1¼ IN FLUTE L, 2¼ IN L, 10XD, RIGHT HAND

CLEVELAND
JOBBER LENGTH DRILL BIT, #43 DRILL BIT SIZE, 1¼ IN FLUTE L, 2¼ IN L, 10XD, RIGHT HAND
Item # GNF2075TAC16974
Mfr. Model # C16974

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 5/64 inch diameter, one-inch long shank. It is for use with cast iron, stainless steel, and meets ASME standards. This 2075-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1¼ inch parabolic flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 5/64 inch diameter, one-inch long shank. It is for use with cast iron, stainless steel, and meets ASME standards. This 2075-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1¼ inch parabolic flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 10 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $21.00 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 7/16 IN DRILL BIT SIZE, 4-1/16 IN FLUTE L, 5½ IN L, RH

CLEVELAND
JOBBER LENGTH DRILL BIT, 7/16 IN DRILL BIT SIZE, 4-1/16 IN FLUTE L, 5½ IN L, RH
Item # GNF2075TAC17000
Mfr. Model # C17000

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 7/16 inch diameter, 1 7/16 inch long shank. It is designed for use with cast iron, stainless steel. This 2075-TA series jobber length drill bit has a TiAlN finish, and has fractional inch measurements. It is non-coolant through with a 5½ inch length. Plus it has two 4 1/16 inch parabolic flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 7/16 inch diameter, 1 7/16 inch long shank. It is designed for use with cast iron, stainless steel. This 2075-TA series jobber length drill bit has a TiAlN finish, and has fractional inch measurements. It is non-coolant through with a 5½ inch length. Plus it has two 4 1/16 inch parabolic flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 5 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $113.07 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, 13/32 IN DRILL BIT SIZE, 3⅞ IN FLUTE L, 5¼ IN L, RIGHT HAND

CLEVELAND
JOBBER LENGTH DRILL BIT, 13/32 IN DRILL BIT SIZE, 3⅞ IN FLUTE L, 5¼ IN L, RIGHT HAND
Item # GNF2213C70025
Mfr. Model # C70025

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 25/64 inch diameter, 1⅜ inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 5¼ inch length. Plus it has two 3⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 25/64 inch diameter, 1⅜ inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has fractional inch measurements. It is non-coolant through with a 5¼ inch length. Plus it has two 3⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 6 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $29.12 / each

EHC: EHC :

Qty:

JOBBER LENGTH DRILL BIT, A DRILL BIT SIZE, 2⅝ IN FLUTE L, 3⅞ IN L, COBALT, RIGHT HAND

CLEVELAND
JOBBER LENGTH DRILL BIT, A DRILL BIT SIZE, 2⅝ IN FLUTE L, 3⅞ IN L, COBALT, RIGHT HAND
Item # GNF2213C70032
Mfr. Model # C70032

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 7/32 inch diameter, 1¼ inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has letter measurements. It is non-coolant through with a 3⅞ inch length. Plus it has two 2⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 7/32 inch diameter, 1¼ inch long shank. It is for use with aluminum, brass, bronze, copper, steel, and meets the standards for NAS 907 Type J. This 2213 series jobber length drill bit has a straw/bronze finish, and has letter measurements. It is non-coolant through with a 3⅞ inch length. Plus it has two 2⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Compare

Web Price : $11.67 / each

EHC: EHC :

Qty:

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Applied Filters

Clear All

Search within these results

Forets courts en cobalt

711 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty

Filter Results By

Applied Filters Clear All

Search within these results

Forets courts en cobalt

711 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Applied Filters

Clear All