Tarauds pour tuyaux et conduits

Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,437 po/une tige de 1 3/8 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et une longueur de 2 1/8 po. De plus, il a 4 cannelures et une tige droite.

Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,437 po/une tige de 1 3/8 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et une longueur de 2 1/8 po. De plus, il a 4 cannelures et une tige droite.

Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,312 po/une tige de 1 7/16 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et une longueur de 2 1/8 po. De plus, il a 4 cannelures et une tige droite.

Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,312 po/une tige de 1 7/16 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et une longueur de 2 1/8 po. De plus, il a 4 cannelures et une tige droite.

Ce taraud pour tuyau est fabriqué en acier rapide M2 et a un diamètre de 1 1/8 po/une tige de 2 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et mesure 3 3/4 po de long. De plus, il a cinq cannelures, une tige droite.

Ce taraud pour tuyau est fabriqué en acier rapide M2 et a un diamètre de 1 1/8 po/une tige de 2 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et mesure 3 3/4 po de long. De plus, il a cinq cannelures, une tige droite.

Ce taraud pour tuyau est fabriqué en acier rapide M2 a un diamètre de 1 7/8 po et une tige de 2 3/4 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et mesure 4 1/2 po de long. De plus, il a sept cannelures et une tige droite.

Ce taraud pour tuyau est fabriqué en acier rapide M2 a un diamètre de 1 7/8 po et une tige de 2 3/4 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et mesure 4 1/2 po de long. De plus, il a sept cannelures et une tige droite.

Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,563 po/une tige de 1 3/8 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et est 2 7/16 po de long. De plus, il a 4 cannelures et une tige droite.

Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,563 po/une tige de 1 3/8 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et est 2 7/16 po de long. De plus, il a 4 cannelures et une tige droite.

Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,563 po/une tige de 1 3/8 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et est 2 7/16 po de long. De plus, il a 4 cannelures et une tige droite.

Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,563 po/une tige de 1 3/8 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et est 2 7/16 po de long. De plus, il a 4 cannelures et une tige droite.

This M2 pipe tap is made of high speed steel and has a 0.906 inch diameter, 1⅞ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This T311-60305 series pipe tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3¼ inch length. Plus it has five flutes, a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.906 inch diameter, 1⅞ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This T311-60305 series pipe tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3¼ inch length. Plus it has five flutes, a straight shank.

This M2 pipe tap is made of high speed steel and has a 1.500 inch diameter, 2½ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60455 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4¼ inch length. Plus it has seven flutes, a straight shank.

This M2 pipe tap is made of high speed steel and has a 1.500 inch diameter, 2½ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60455 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4¼ inch length. Plus it has seven flutes, a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.906 inch diameter, 1⅞ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-60305 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3¼ inch length. Plus it has five flutes, a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.906 inch diameter, 1⅞ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-60305 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3¼ inch length. Plus it has five flutes, a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.312 inch diameter, 1 7/16 inch long shank. It is designed for use with all materials, and meets ANSI standards. This H311-62055 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.312 inch diameter, 1 7/16 inch long shank. It is designed for use with all materials, and meets ANSI standards. This H311-62055 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.700 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This T311-60205 series pipe tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 9/16 inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.700 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This T311-60205 series pipe tap has a TiN finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 9/16 inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 1.313 inch diameter, 2¼ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60405 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a four-inch length. Plus it has five flutes, a straight shank.

This M2 pipe tap is made of high speed steel and has a 1.313 inch diameter, 2¼ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60405 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a four-inch length. Plus it has five flutes, a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.906 inch diameter, 1⅞ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This H311-62305 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3¼ inch length. Plus it has five flutes, a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.906 inch diameter, 1⅞ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This H311-62305 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3¼ inch length. Plus it has five flutes, a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.700 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60205 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 9/16 inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 0.700 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60205 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 9/16 inch length. Plus it has four flutes and a straight shank.

This M2 pipe tap is made of high speed steel and has a 1.500 inch diameter, 2½ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-60455 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4¼ inch length. Plus it has seven flutes, a straight shank.

This M2 pipe tap is made of high speed steel and has a 1.500 inch diameter, 2½ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-60455 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 4¼ inch length. Plus it has seven flutes, a straight shank.

This M2 hand tap is made of high speed steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-6015 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length. Plus it has four flutes and a straight shank.

This M2 hand tap is made of high speed steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-6015 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length. Plus it has four flutes and a straight shank.