Forets extra-longs en acier rapide

Ce foret extra-long est fabriqué en acier rapide et possède une tige de 5/32 de po de diamètre/3 7/8 po de long. Il est destiné à être utilisé avec de l'acier et répond aux normes ASME. Ce foret a un fini oxyde noir et des mesures de fil. Il est sans canal de refroidissement et a une longueur de 6 po. De plus, il a deux cannelures hélicoïdales de 2 1/8 po, une tige droite et un angle de pointe de 135°.

Ce foret extra-long est fabriqué en acier rapide et possède une tige de 5/32 de po de diamètre/3 7/8 po de long. Il est destiné à être utilisé avec de l'acier et répond aux normes ASME. Ce foret a un fini oxyde noir et des mesures de fil. Il est sans canal de refroidissement et a une longueur de 6 po. De plus, il a deux cannelures hélicoïdales de 2 1/8 po, une tige droite et un angle de pointe de 135°.

Ce foret extra-long est fabriqué en acier rapide et possède une tige de 1/8 de po de diamètre/1 3/8 po de long. Il est destiné à être utilisé avec de l'acier et répond aux normes ASME. Ce foret a un fini oxyde noir et des mesures fractionnaires en po. Il est sans canal de refroidissement et mesure 12 po de long. De plus, il a deux cannelures hélicoïdales de 1 5/8 po, une tige droite et un angle de pointe de 135°.

Ce foret extra-long est fabriqué en acier rapide et possède une tige de 1/8 de po de diamètre/1 3/8 po de long. Il est destiné à être utilisé avec de l'acier et répond aux normes ASME. Ce foret a un fini oxyde noir et des mesures fractionnaires en po. Il est sans canal de refroidissement et mesure 12 po de long. De plus, il a deux cannelures hélicoïdales de 1 5/8 po, une tige droite et un angle de pointe de 135°.

This heavy-duty drill bit is made of high speed steel and has a ¼ inch diameter, 3¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, nickel, steel, titanium, and meets ASME standards. This extra long drill bit has a black oxide finish. It is non-coolant through with a six-inch length. Plus it has two 2¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty drill bit is made of high speed steel and has a ¼ inch diameter, 3¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, nickel, steel, titanium, and meets ASME standards. This extra long drill bit has a black oxide finish. It is non-coolant through with a six-inch length. Plus it has two 2¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

Ce foret extra-long en acier rapide de haute performance a un diamètre de 1/4 de po/3 1/4 de po de long. Pour l’aluminium, le laiton, le bronze, la fonte et plus: répond aux normes ASME. Ce foret a un fini oxyde noir et des mesures fractionnaires en po. Il est sans canal de refroidissement et a une longueur de 6 po. De plus, il a deux cannelures en spirale de 2 3/4 po, une tige droite et un angle de pointe de 135°.

Ce foret extra-long en acier rapide de haute performance a un diamètre de 1/4 de po/3 1/4 de po de long. Pour l’aluminium, le laiton, le bronze, la fonte et plus: répond aux normes ASME. Ce foret a un fini oxyde noir et des mesures fractionnaires en po. Il est sans canal de refroidissement et a une longueur de 6 po. De plus, il a deux cannelures en spirale de 2 3/4 po, une tige droite et un angle de pointe de 135°.

Ce foret extra-long en acier rapide haute performance a un diamètre de 7/16 po et une tige de 7 15/16 po de long. Il est destiné à être utilisé avec de la fonte, de l'acier et répond aux normes ASME. Ce foret a un fini oxyde noir et des mesures fractionnaires en po. Il est sans canal de refroidissement et mesure 12 po de long. De plus, il a deux cannelures hélicoïdales de 4 1/16 po, une tige droite et un angle de pointe de 135°.

Ce foret extra-long en acier rapide haute performance a un diamètre de 7/16 po et une tige de 7 15/16 po de long. Il est destiné à être utilisé avec de la fonte, de l'acier et répond aux normes ASME. Ce foret a un fini oxyde noir et des mesures fractionnaires en po. Il est sans canal de refroidissement et mesure 12 po de long. De plus, il a deux cannelures hélicoïdales de 4 1/16 po, une tige droite et un angle de pointe de 135°.

This extra long drill bit is made of high speed steel and has a 11/64 inch diameter, 3 13/16 inch long shank. It is designed for use with steel, and meets ASME standards. This extra long drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a six-inch length. Plus it has two 2 3/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This extra long drill bit is made of high speed steel and has a 11/64 inch diameter, 3 13/16 inch long shank. It is designed for use with steel, and meets ASME standards. This extra long drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a six-inch length. Plus it has two 2 3/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This extra long drill bit is made of high speed steel and has a 3/16 inch diameter, 3 9/16 inch long shank. It is designed for use with steel, and meets ASME standards. This extra long drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a six-inch length. Plus it has two 2 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This extra long drill bit is made of high speed steel and has a 3/16 inch diameter, 3 9/16 inch long shank. It is designed for use with steel, and meets ASME standards. This extra long drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a six-inch length. Plus it has two 2 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This extra long drill bit is made of high speed steel and has a 1/16 inch diameter, 5⅛ inch long shank. It is designed for use with steel, and meets ASME standards. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a six-inch length. Plus it has two ⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This extra long drill bit is made of high speed steel and has a 1/16 inch diameter, 5⅛ inch long shank. It is designed for use with steel, and meets ASME standards. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a six-inch length. Plus it has two ⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This extra long drill bit is made of high speed steel and has a ⅛ inch diameter, 4⅜ inch long shank. It is designed for use with steel, and meets ASME standards. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a six-inch length. Plus it has two 1⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This extra long drill bit is made of high speed steel and has a ⅛ inch diameter, 4⅜ inch long shank. It is designed for use with steel, and meets ASME standards. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a six-inch length. Plus it has two 1⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This aircraft extension drill bit is made of high speed steel and has a 13/64 inch diameter, 3½ inch long shank. It is for use with steel, and meets ASME standards. This extended length aircraft extension drill bit has a steam oxide finish, and has wire measurements. It is non-coolant through with a six-inch length. Plus it has two 2½ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This aircraft extension drill bit is made of high speed steel and has a 13/64 inch diameter, 3½ inch long shank. It is for use with steel, and meets ASME standards. This extended length aircraft extension drill bit has a steam oxide finish, and has wire measurements. It is non-coolant through with a six-inch length. Plus it has two 2½ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This extra long drill bit is made of high speed steel and has a 3/16 inch diameter, 3 9/16 inch long shank. It is designed for use with steel, and meets ASME standards. This extra long drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a six-inch length. Plus it has two 2 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This extra long drill bit is made of high speed steel and has a 3/16 inch diameter, 3 9/16 inch long shank. It is designed for use with steel, and meets ASME standards. This extra long drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a six-inch length. Plus it has two 2 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This general purpose extra long drill bit is made of high speed steel and has a ⅜ inch diameter, 4 inch long shank. It is for use with cast iron, steel, and meets ASME standards. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 18 inch length. Plus it has two 14 inch spiral flutes, a straight shank, and 118 Degrees notched point drill point.

This general purpose extra long drill bit is made of high speed steel and has a ⅜ inch diameter, 4 inch long shank. It is for use with cast iron, steel, and meets ASME standards. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 18 inch length. Plus it has two 14 inch spiral flutes, a straight shank, and 118 Degrees notched point drill point.

This general purpose extra long drill bit is made of high speed steel and has a ½ inch diameter along with a three-inch long shank. It is for use with cast iron, steel, and meets ASME standards. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 12 inch length. Plus it has two 9 inch spiral flutes, a straight shank, and 118 Degrees notched point drill point.

This general purpose extra long drill bit is made of high speed steel and has a ½ inch diameter along with a three-inch long shank. It is for use with cast iron, steel, and meets ASME standards. This extra long drill bit has a black oxide finish, and has fractional inch measurements. It is non-coolant through with a 12 inch length. Plus it has two 9 inch spiral flutes, a straight shank, and 118 Degrees notched point drill point.