THREADLOCKER, SERIES 243, FULL CURE 24 HR, OIL RESIST, MED STRENGTH, 36 ML, DIMETHACRYLATE ESTER
THREADLOCKER, SERIES 243, FULL CURE 24 HR, OIL RESIST, MED STRENGTH, 36 ML, DIMETHACRYLATE ESTER
LOCTITE
close
close x
images.360.info.textHead1
360°
images.360.info.textHead2
Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
Zoom In: Double click on image.
Zoom Out/Reset: Put photo at full zoom & then double click.
Roll over image to zoom.
Product Details
This series 243 medium-strength threadlocker has a 24-hour full cure, 1350 to 3000 thixotropic viscosity, and is available in a 36-millilitre bottle. With a dimethacrylate ester chemical type, this surf-insensitive threadlocker has 1.08 specific gravity and a flash point greater than 93.3C. It is oil-resistant and is removable with 1/4 to 3/4-inch hardware.
Technical Specs
Item Threadlocker
Colour Blue
Container Type Bottle
Breakaway Torque 230 in-lb
Threadlocker Properties No-Drip, Oil Tolerant
Chemical Base Dimethacrylate Ester
Maximum Operating Temperature 360 Degrees F
Minimum Operating Temperature -65 Degrees F
Product Form Liquid
Specific Gravity 1.08
VOC Content 0.0109
Threadlocking Strength Medium
Container Size 36 mL
Working Time 10 min
Cure Type Anaerobic
Standards P1 NSF Reg. No.: 123000, RoHs
Flash Point 199.4 Degrees F
Maximum Viscosity 2,150 cP
Prevailing Torque 40 in-lb
Removal Method Hand Tool
Storage Requirements 8 Degrees to 21 Degrees C
Series 243