DOUBLE DIAPHRAGM PUMP, AIR, POLYPROPYLENE, BOLT, 3/8 IN FLUID CONNECTION SIZE, NPT, PTFE
DOUBLE DIAPHRAGM PUMP, AIR, POLYPROPYLENE, BOLT, 3/8 IN FLUID CONNECTION SIZE, NPT, PTFE
INGERSOLL RAND
close
close x
images.360.info.textHead1
360°
images.360.info.textHead2
- Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
- Zoom In: Double click on image.
- Zoom Out/Reset: Put photo at full zoom & then double click.
Roll over image to zoom.
Product Details
Air-operated diaphragm pump, 1/4 inch fluid ports NPT(F), santoprene diaphragm. Offers wide material compatibility (acids, alkalis, stabilizers, aliphatic solutions, polar substances, etc.), high fatigue endurance and superior abrasion resistance.
Technical Specs
- ItemDouble Diaphragm Pump
- Air Intake Connection Size1/4 in
- Check Seat MaterialPolypropylene
- Feet of Head (Maximum)230 ft
- Manifold ConnectionSingle Port
- Media Discharge Connection TypeNPTF
- Media Intake Connection Size3/8 in
- Media Intake LocationSide
- Operating Pressure (Maximum)100 psi
- Pump Assembly TypeBolt
- Valve MaterialPTFE
- Wetted Housing MaterialPolypropylene
- Valve TypeBall
- Flow Rate @ 100 psi11 gpm
- Flow Rate @ 50 psi9 gpm
- Flow Rate @ 70 psi10 gpm
- Flow Rate @ 90 psi10.8 gpm
- Manifold Connection TypeNPT
- Media Temperature (Minimum)40 Degrees F
- Non-Wetted Housing MaterialPlastic
- Overall Height9.2 in
- Overall Width5.7 in
- SeriesPD03P
- Air Consumption (Maximum) 18 scfm
- Air Intake Connection Type NPT
- Diaphragm Material PTFE
- Flow Rate (Maximum) 11 gpm
- Media Discharge Connection Size 3/8 in
- Media Discharge Location Side
- Media Intake Connection Type NPT
- Media Temperature (Maximum) 225 Degrees F
- Priming Self-Priming
- Solid Diameter (Maximum) 0.06 in
- Viscosity (Maximum) 500 cps
- Chemical Compatibility Ammonium Hydroxide, Calcium Carbonate, Diesel Exhaust Fluid, Hydrochloric Acid: 10%, 20%, 30%, 40%, Phosphoric Acid: 40%, 50%, 60%, 70%, 80%, 90%, 100%, Potassium Hydroxide: 50%, Sodium Hydroxide: 20%, 50%, 80%, Sodium Hypochlorite: 5%, 10%, 20%, Sulfuric Acid: 10%, 20%, 30%, 40%, 50%, 60%, 70%, Water
- Air Intake Pressure (Maximum) 100 psi
- Flow Rate @ 40 psi 8 gpm
- Flow Rate @ 60 psi 9.5 gpm
- Flow Rate @ 80 psi 10.5 gpm
- For Use With Potable Systems For Use with Potable Systems
- Manufacturers Warranty Length 5 yr
- Mounting Hardware Material Stainless Steel
- NPSHr 35 ft of head
- Overall Length 7.9 in
- Pump Operation Type Air
